(adsbygoogle = window.adsbygoogle || []).push({}); Got the Blue Screen of Death and i need this laptop for recording and working purposes !

Everytime i open up a program it works really slowly and it sometimes crashes.

Sometimes, the blue screen comes up and does the physical dump and it works then a couple minutes after it works and keeps on acting up !

Skype: Crisisbeast

PM or Quote i really need this laptop working we can use screen share or teamviewer !

back up what you can and reinstall your windows

Can you please provide system specs and what operating system are you using?

There could be a hardware configuration problem. While booting press something like F8 or ESC and boot to last known good configuration. See if that makes a difference.

Tried it twice.

---------- Post added at 10:22 PM ---------- Previous post was at 10:20 PM ----------

Intel Celeron, 2gb RAM, Windwos 7 x64 bit

It is most likely a hardware issue. Although running 64 bit on 2gb of Ram isn't the fastest, it should still be working. Are you able to open the computer and rummage about? Maybe snap a picture of your BSOD the next time it happens. I'll get back to you with a link that will show you how to read your BSoD.

Again, try booting up using last known good configuration, and see if that makes a difference. PC's have cryptic error messages and driver problems and such, so it might still be because of a software issue. Running check disk won't hurt either. Looking forward to hearing from you. Good luck :y:

It came with x64 bit, so i naturally installed it again, i downloaded a program that reads them, but since im not that experienced with software i ddint know what to do.

Trying to get BSOD atm, so i can take a picture !

I can't imagine that x64 bit came natural on that. With only 2 gigs of ram, and a Celeron processor. Main reason is x64 bit is pointless unless your are running 4 gigs of ram or more.

I would try these 2 things.

Restore the BIOS. (Not default in the BIOS) I mean RE-Flash it. (Done with flash drive) Just google your model and how to do that, you will find out how.
Other thing if that don't work. Re-install windows. But do not use 64bit. Use 32 bit.