(adsbygoogle = window.adsbygoogle || []).push({});
This best fits this section because it applies to both consoles. In my example i will use XBOX 360.
Here's what you will need:
* HAVA Platinum HD placeshifter device
* Two (2) triple phono couplers
* Xbox 360 console with component cord
* 5 to 10GB of free space on your computer’s hard drive
Step 1:
Lay out the HAVA Platinum HD (picture of back) in an open space near your computer and Xbox 360:
You must login or register to view this content.
Step 2:
Take a triple phono coupler and plug the component (red, green, blue) cord into one side, and then take a component cord that came with the HAVA and plug it into the other end. Then plug the mini-stereo jack into the back of the HAVA where it says HD In.
You must login or register to view this content.
Step 3:
Take the audio RCA cable from the Xbox (it’s the same component cord that has the red/green/blue on it) and take the other triple phono coupler and plug the red and white cords in (doesn’t matter which colors it goes into.) Then take the same audio RCA cable that came with the HAVA (red/white/yellow cord) and plug it into the other side, making sure the red and white plugs are on the same alignment. Then plug in the mini-stereo jack into the back of the HAVA where it says A/V In.
You must login or register to view this content.
Step 4:
Now take the other audio RCA cord (red/white/yellow) that came with the HAVA and plug the mini-stereo jack into the back of the HAVA where it says A/V Out. Do the same for the other component cord that came with the HAVA and plug that one into the back where it says HD Out.
You must login or register to view this content.
Step 5:
Plug both cords from Step 4 into the TV where you’ll be playing the Xbox 360 on.
You must login or register to view this content.
Step 6:
Connect the ethernet cord to your router, and the power cord, and plug it in.
Step 7:
Make sure your TV is on the correct video source (for example, the HAVA is plugged into my TV’s Component 2). Turn on your Xbox 360. If the logo comes up and everything works fine, you’ve set everything up properly.
Step 8:
Go to HAVA’s Download and Upgrade page and grab the latest software and firmware for the HAVA Platinum HD. Install the software and follow instructions. Update to the latest firmware if needed. Once everything is installed and set up properly on the computer, run the HAVA Player.