(adsbygoogle = window.adsbygoogle || []).push({}); i am jailbreaking my ps3 via E3 flasher but cant find the right update.bin files or any correct files for that matter so any help would be great. thank you

Update download --> You must login or register to view this content.

How to apply update:

First insert the microSD card in your computer and make sure it is formatted as fat32. Then download the firmware file (Here), extract the file and copy the file on your microSD card. When copied, insert the card in your E3Flasher:

Slide the empty cover to the right, this will unlock the cover:

You must login or register to view this content.

Now lift the cover towards you :

You must login or register to view this content.

Insert the microSD card like the picture below :

You must login or register to view this content.

Now slice the cover to the left to lock the microSD card in place:

You must login or register to view this content.

When the card is inserted, set the switches to “update mode” by setting the switches in the following direction :

Switch1 : Down
Switch2 : Down
Switch3 : Up
Switch4 : Up
Switch5 : Up
Switch6 : Up

You must login or register to view this content.

When done, turn on your PS3, 6 green Led’s and 1 red Led should turn on, then the blue leds will come on. This means the E3Flasher is updating it’s firmware. (if not, disconnect your eSata cable & try again)

You must login or register to view this content.

When all blue led’s are on, click the “Reset” button under the blue leds to reset the E3Flasher.

You must login or register to view this content.

The blue leds should go off. Now turn off your PS3 and remove the microSD card. Then put the microSD card in your PC and check if the “update.bin” file has been removed, if not removed there should be a text file containing an error code added to your microSD card.

If the microSD card is empty, the update has been installed and you can now downgrade unlimited PS3’s with your E3Flasher!