(adsbygoogle = window.adsbygoogle || []).push({}); With all the concern of late about the continued longevity of the original "fat" PS3s, I thought it was wise to take some preventative action to make sure my system can run as long as possible. Me and some buddys of mine tested these 3 tips to share with you, with the goal of getting a PS3 running cooler and greener, which hopefully means better longevity.

I'm sure some of you may be familiar with at least one of these tips, but perhaps not all three. And if you decide to use all thee tips, you should get the maximum benefit. *WARNING* Of course you shouldn't attempt any of these tips if you are uncomfortable with opening up and servicing your own PS3 (or for some reason your PS3 is still under warranty). If you are not comfortable, you may want to ask a video game repair facility to perform these tips for you. For those that wish to familiarize themselves with opening up and disassembling their own PS3, you should carefully study this You must login or register to view this content.

In terms of importance for addressing first, IMO tip #3 is the most important one, followed by tip #2 and tip #1. In terms of ease of accomplishment, it would be tip #1 by far, followed by tip #2, and tip #3.

NOTE:
These tips are intended only for the owners of PS3 systems models:
60GB (CECHA01)
20GB (CECHB01)
60GB PAL(CECHC01)
80GB (CECHE01)
40GB (CECHG01)

If you have any of the following PS3 models:
40GB (CECHH01)
40GB (CECHJ01)
80GB (CECHK01)
80GB (CECHL01)
80GB (CECHM01)
160GB (CECHP01)
160GB (CECHQ01)

I recommend that you do not attempt to perform tip #2 or tip #3 yourself. The reason is that performing either tip requires the heatsink to be removed. The problem is that it can be difficult to reattach the heatsink properly back on these models, when you re-assemble the PS3. If it is not re-assembled properly, thermal conduction between the CPU/GPU & the heatsink could be compromised, and you would then be worse off than you were to begin with.

Although it is still very important have the thermal grease replaced on these models, I recommend that you should have a repair place like Gophermods do it for you. They would have the expertise to reattach the heatsinks back on properly.
[multipage=Step 1]Tip #1: Replace the PS3 power supply

The standard power supply that comes with the backwards compatible PS3 run very hot and is a huge source of heat inside the PS3. These power supplies provide far more power than any of the backward compatible PS3s ever needs. In my opinion they run so hot it probably would have been wise that Sony made the power supply external, so that the PS3 could cool more efficiently.

In the backwards compatible 20GB/60GB/80GB models you will either have the ZSSR5391A or the APS-226 (APS-227 if you have the 60GB PAL CECHC01) power supply.

You should replace your power supply with model APS-231, it runs much cooler than the default power supply. This power supply is originally included in the 40GB PS3 (CECHG01), but is fully compatible with all the PS2 backwards compatible PS3 systems. Obviously if you already have a 40GB CECHG01 model, you don't have to do a thing


This is the easiest tip to implement, since it doesn't require you to fully disassemble the PS3, like the other tips do. The APS-231 power supplies available for sale on eBay. The average cost is around $30.

Also the APS-231 power supply consumes less power than either of the original power supplies (with a savings of at least 100W), so your electricity bill should be lower plus you will be helping out the environment. LOL
[multipage=Step 2]
Tip #2: Replace the PS3 fan with a 19-bladed one

There are two different fans that are compatible with these PS3 systems, a 15-bladed fan and a 19-bladed fan. The earliest produced PS3 models had the 19-blade fan and then Sony switched over to the 15-blade one. It is generally believed that the 19 bladed fan moves more air and is quieter than the 15-blade. There has also been some speculation that the 15-blade fan recirculates hot air in the heatsink because of its faulty design.

While you probably need to replace your fan you should verify it first. Usually you need to nearly disassemble your entire PS3 to get a look at a the fan, but there is a trick to do it without opening up your PS3. What you need to do is to shine a very bright flashlight into the exhaust port on the back of the PS3, just above the serial number, in a dark room. Since the PS3 case is made of translucent plastic, you should be able to make out the silhouette of at least 1/4 of the blades on the PS3 fan. Multiply the number by 4 to estimate how many blades you have. Also keep in mind the 19-bladed fan has straight blades and the 15-bladed fans are slightly curved.

Replacement original used PS3 fans can be purchased from eBay for around $20. There is a company called Tailsmoon that also sells their own new replacement fans for $30-40, however I have read some testimonials (especially on Amazon) that say some of the fans were made unbalanced and can scrape the heatsink making more noise than before, and cause the entire PS3 to vibrate. To be on the safe side, I suggest you stick with a used OEM 19-bladed PS3 fan from eBay.

While the 19-bladed fan is quieter, it only is by a few decibels. If you are playing in a warm room or watching content and playing games in HD, don't expect a whisper quiet system. But you can be sure your PS3 is getting a better air flow than it did before.

[multipage=Step 3]
Many people know about this one. With all the early talk of how reliable the PS3 is with estimated defect rates of less than 1%, and the PS3's ability to survive a grueling stress test. Apparently it turns out the PS3's Achilles heal is the thermal grease that Sony uses on the PS3. It is believed that the thermal grease tends to dry out over time, and when it does the PS3 may have issues keeping itself cool during normal use.

Many people have been advocating replacing the original thermal grease with Arctic Silver 5 (AS5), while there is nothing wrong with that, there are many other thermal compounds you should consider. With any silver-based thermal compound there is the potential issue of problems occurring if excess paste were ever to spill onto the motherboard, because of its conductive nature. While AS5 is made not to be conductive, it is still slightly capacitive. Another issue with AS5 is it can take up to 200 hours to cure properly, while many of the other compounds out there have little to no curing time.

There are many non-metallic based compounds that you can choose from, that perform just as well or better than AS5. Here is a site that gives a comprehensive comparison. Whichever one you choose, it is bound to be a drastic improvement over what Sony uses, and should never dry out or need to be re-applied.
You must login or register to view this content.

Personally I would go with the IC Diamond 7 (IC7) thermal compound. It is comprised of 92% micronized diamonds. Diamond is one of the best thermal compounds out there, and supposedly has 5 times better thermal conductivity as silver. It costs about the same as AS5.

As far as application of the thermal compound goes, I would suggest that a pea sized amount (~8mm in diameter) be placed in the center of the PS3's CELL & RSX processors (unless the instructions of the thermal compound you select suggest otherwise). This way the compound will spread out evenly when you replace the heatsink, preventing air pockets forming in the compound (that can counteract the thermal transfer process).
[multipage=Conclusion]

With these three tips, I believe you can make your PS3 run and cool better than it has before, and you can assure yourself that you have taken all the steps you could to keep your system operating properly for a long time. Of course these tips are going to be most effective to those whom never had their PS3 repaired due to experiencing a motherboard based YLOD issue, but even if you have you should still get some benefits from these tips too.


Anyways thanks for reading this.Hope this helps keep your ps3 alive

thanks dude

^^^No problem

cool post mate, this is something I might think about in the future

^^thanks.JUst clean out your ps3 about every 7 months to clean out the dust.

Thanks for this.THis will help keep my ps3 running longer.Great guide