Post: [tutorial] how to double your cpm
Options
08-29-2015, 04:31 PM
#1
NUKES_mAn97
Are you high?
Hey ngu whats up! so after making my first youtube guide on here i'm back with my second method to increasing your earnings on youtube
Check out my other youtube guide here:
You must login or register to view this content.
So lets begin with some proof that this method works
so i uploaded 20 youtube videos and sent views to each of them. 10 of the videos i didnt use my cpm method the other 10 videos i did use my cpm method so here is the results...
Here is 1 of the 10 videos i didn't use my method on:
You must login or register to view this content.
Here is 1 of the 10 videos i did use my method on:
You must login or register to view this content.
As you can see from the results/proof above, the CPM is almost double the CPM of the video that I didn't use my CPM method on.
Okay so here is the method...
1. The first step to utilize my method is your video MUST be longer than 10 minutes. If your video is NOT longer than 10 minutes, you will NOT be able to utilize my method.
2. Once you've uploaded a video that is longer than 10 minutes, head on over to the monetization tab.
You must login or register to view this content.
3. Once you're on the monetization tab of your video, you will notice that you are allowed to put in ad-breaks.
You must login or register to view this content.
An ad-break means that during the video, a person viewing it will be prompted with another ad (or two, depending on the amount of ads you setup here). These ads are video ads, so the viewer will be stopped from watching your video and the ad will begin to play. Here, you can set manual time throughout the video to have an ad play. Here's where you increase your CPM
If one viewer sees 3 ads on your video instead of just 1, you can essentially see that your CPM will increase since that viewer saw more than one ad.
If your video is NOT longer than 10 minutes, you will not see the option to input ad-breaks, as you can see here in this short video :
You must login or register to view this content.
On a 13 minute video, I usually put the following settings as ad-breaks for the best results.
You must login or register to view this content.
I've tested many different timings and these seem to work best.
Please note, if you put an ad before the 5 minute mark, it will never show the ad. I've tested it several times and it never shows an ad if you put the break before 5 minutes. ALSO, you may think (well why don't I just put ad breaks every 30 seconds and make my CPM $150 ?) Well, that won't work like that. If you put too many ads, then the YouTube video won't actually play the ads. With these settings above, most of the time, one view to my video gets 3 ads played back. One at the very beginning of the video, one at 6:30 in the video and one at 10:30 in the video.
When you put in the ad-breaks, this is what your video will now look like :
You must login or register to view this content.
As you can see, it now has many yellow tick marks on the timeline. When the red bar reaches the yellow tick mark, it'll start up a video ad. Also, keep in mind, if you manually drag the scrubber forward 5 minutes or something, it won't show the ad at 6:30. You have to watch the video for the whole 6:30 to have an ad actually load up when it reaches that point in the video. Here's what it looks like when you reach one of the yellow tick marks on the timeline.
You must login or register to view this content.
[/SIZE]You must login or register to view this content.
So lets begin with some proof that this method works
so i uploaded 20 youtube videos and sent views to each of them. 10 of the videos i didnt use my cpm method the other 10 videos i did use my cpm method so here is the results...
Here is 1 of the 10 videos i didn't use my method on:
You must login or register to view this content.
Here is 1 of the 10 videos i did use my method on:
You must login or register to view this content.
As you can see from the results/proof above, the CPM is almost double the CPM of the video that I didn't use my CPM method on.
Okay so here is the method...
1. The first step to utilize my method is your video MUST be longer than 10 minutes. If your video is NOT longer than 10 minutes, you will NOT be able to utilize my method.
2. Once you've uploaded a video that is longer than 10 minutes, head on over to the monetization tab.
You must login or register to view this content.
3. Once you're on the monetization tab of your video, you will notice that you are allowed to put in ad-breaks.
You must login or register to view this content.
An ad-break means that during the video, a person viewing it will be prompted with another ad (or two, depending on the amount of ads you setup here). These ads are video ads, so the viewer will be stopped from watching your video and the ad will begin to play. Here, you can set manual time throughout the video to have an ad play. Here's where you increase your CPM
If one viewer sees 3 ads on your video instead of just 1, you can essentially see that your CPM will increase since that viewer saw more than one ad.If your video is NOT longer than 10 minutes, you will not see the option to input ad-breaks, as you can see here in this short video :
You must login or register to view this content.
On a 13 minute video, I usually put the following settings as ad-breaks for the best results.
You must login or register to view this content.
I've tested many different timings and these seem to work best.
Please note, if you put an ad before the 5 minute mark, it will never show the ad. I've tested it several times and it never shows an ad if you put the break before 5 minutes. ALSO, you may think (well why don't I just put ad breaks every 30 seconds and make my CPM $150 ?) Well, that won't work like that. If you put too many ads, then the YouTube video won't actually play the ads. With these settings above, most of the time, one view to my video gets 3 ads played back. One at the very beginning of the video, one at 6:30 in the video and one at 10:30 in the video.
When you put in the ad-breaks, this is what your video will now look like :
You must login or register to view this content.
As you can see, it now has many yellow tick marks on the timeline. When the red bar reaches the yellow tick mark, it'll start up a video ad. Also, keep in mind, if you manually drag the scrubber forward 5 minutes or something, it won't show the ad at 6:30. You have to watch the video for the whole 6:30 to have an ad actually load up when it reaches that point in the video. Here's what it looks like when you reach one of the yellow tick marks on the timeline.
You must login or register to view this content.
For comparison, here is the same video without the ad-breaks setup.
You must login or register to view this content.
4. Once you've setup your video in this manner you're all done
Now, keep in mind, you will NOT increase your CPM unless you get views that are longer than the time of your second ad-break. For example, if I were to get only 5 minute views, then the second ad wouldn't play, so the CPM wouldn't increase. So, to make this method work, you should get about 10 minute views to the video :yes:
I hope you guys enjoy this method and have fun doubling your cpm please leave feed back and feel free to ask questions this tutorial took me ages and i'm really proud i could give this to the ngu community so please use the fuck out of this method and if you share this anywhere else make sure you leave credits
peace out ngu while i work on my next method
[/SIZE]You must login or register to view this content.
4. Once you've setup your video in this manner you're all done
Now, keep in mind, you will NOT increase your CPM unless you get views that are longer than the time of your second ad-break. For example, if I were to get only 5 minute views, then the second ad wouldn't play, so the CPM wouldn't increase. So, to make this method work, you should get about 10 minute views to the video :yes:
I hope you guys enjoy this method and have fun doubling your cpm please leave feed back and feel free to ask questions this tutorial took me ages and i'm really proud i could give this to the ngu community so please use the fuck out of this method and if you share this anywhere else make sure you leave credits
peace out ngu while i work on my next method p.s i know some people may know this method but this guide is for the people that don't know
credit: Laserus
The following 7 users say thank you to NUKES_mAn97 for this useful post:
10-25-2015, 10:53 PM
#3
NUKES_mAn97
Are you high?
10-26-2015, 06:40 AM
#4
Roar
Guest
Originally posted by mAn97
Hey ngu whats up! so after making my first youtube guide on here i'm back with my second method to increasing your earnings on youtube
Check out my other youtube guide here:
You must login or register to view this content.
So lets begin with some proof that this method works
so i uploaded 20 youtube videos and sent views to each of them. 10 of the videos i didnt use my cpm method the other 10 videos i did use my cpm method so here is the results...
Here is 1 of the 10 videos i didn't use my method on:
You must login or register to view this content.
Here is 1 of the 10 videos i did use my method on:
You must login or register to view this content.
As you can see from the results/proof above, the CPM is almost double the CPM of the video that I didn't use my CPM method on.
Okay so here is the method...
1. The first step to utilize my method is your video MUST be longer than 10 minutes. If your video is NOT longer than 10 minutes, you will NOT be able to utilize my method.
2. Once you've uploaded a video that is longer than 10 minutes, head on over to the monetization tab.
You must login or register to view this content.
3. Once you're on the monetization tab of your video, you will notice that you are allowed to put in ad-breaks.
You must login or register to view this content.
An ad-break means that during the video, a person viewing it will be prompted with another ad (or two, depending on the amount of ads you setup here). These ads are video ads, so the viewer will be stopped from watching your video and the ad will begin to play. Here, you can set manual time throughout the video to have an ad play. Here's where you increase your CPM If one viewer sees 3 ads on your video instead of just 1, you can essentially see that your CPM will increase since that viewer saw more than one ad.
If your video is NOT longer than 10 minutes, you will not see the option to input ad-breaks, as you can see here in this short video :
You must login or register to view this content.
On a 13 minute video, I usually put the following settings as ad-breaks for the best results.
You must login or register to view this content.
I've tested many different timings and these seem to work best.
Please note, if you put an ad before the 5 minute mark, it will never show the ad. I've tested it several times and it never shows an ad if you put the break before 5 minutes. ALSO, you may think (well why don't I just put ad breaks every 30 seconds and make my CPM $150 ?) Well, that won't work like that. If you put too many ads, then the YouTube video won't actually play the ads. With these settings above, most of the time, one view to my video gets 3 ads played back. One at the very beginning of the video, one at 6:30 in the video and one at 10:30 in the video.
When you put in the ad-breaks, this is what your video will now look like :
You must login or register to view this content.
As you can see, it now has many yellow tick marks on the timeline. When the red bar reaches the yellow tick mark, it'll start up a video ad. Also, keep in mind, if you manually drag the scrubber forward 5 minutes or something, it won't show the ad at 6:30. You have to watch the video for the whole 6:30 to have an ad actually load up when it reaches that point in the video. Here's what it looks like when you reach one of the yellow tick marks on the timeline.
You must login or register to view this content.
[/SIZE]You must login or register to view this content.
So lets begin with some proof that this method works
so i uploaded 20 youtube videos and sent views to each of them. 10 of the videos i didnt use my cpm method the other 10 videos i did use my cpm method so here is the results...
Here is 1 of the 10 videos i didn't use my method on:
You must login or register to view this content.
Here is 1 of the 10 videos i did use my method on:
You must login or register to view this content.
As you can see from the results/proof above, the CPM is almost double the CPM of the video that I didn't use my CPM method on.
Okay so here is the method...
1. The first step to utilize my method is your video MUST be longer than 10 minutes. If your video is NOT longer than 10 minutes, you will NOT be able to utilize my method.
2. Once you've uploaded a video that is longer than 10 minutes, head on over to the monetization tab.
You must login or register to view this content.
3. Once you're on the monetization tab of your video, you will notice that you are allowed to put in ad-breaks.
You must login or register to view this content.
An ad-break means that during the video, a person viewing it will be prompted with another ad (or two, depending on the amount of ads you setup here). These ads are video ads, so the viewer will be stopped from watching your video and the ad will begin to play. Here, you can set manual time throughout the video to have an ad play. Here's where you increase your CPM
If one viewer sees 3 ads on your video instead of just 1, you can essentially see that your CPM will increase since that viewer saw more than one ad.If your video is NOT longer than 10 minutes, you will not see the option to input ad-breaks, as you can see here in this short video :
You must login or register to view this content.
On a 13 minute video, I usually put the following settings as ad-breaks for the best results.
You must login or register to view this content.
I've tested many different timings and these seem to work best.
Please note, if you put an ad before the 5 minute mark, it will never show the ad. I've tested it several times and it never shows an ad if you put the break before 5 minutes. ALSO, you may think (well why don't I just put ad breaks every 30 seconds and make my CPM $150 ?) Well, that won't work like that. If you put too many ads, then the YouTube video won't actually play the ads. With these settings above, most of the time, one view to my video gets 3 ads played back. One at the very beginning of the video, one at 6:30 in the video and one at 10:30 in the video.
When you put in the ad-breaks, this is what your video will now look like :
You must login or register to view this content.
As you can see, it now has many yellow tick marks on the timeline. When the red bar reaches the yellow tick mark, it'll start up a video ad. Also, keep in mind, if you manually drag the scrubber forward 5 minutes or something, it won't show the ad at 6:30. You have to watch the video for the whole 6:30 to have an ad actually load up when it reaches that point in the video. Here's what it looks like when you reach one of the yellow tick marks on the timeline.
You must login or register to view this content.
For comparison, here is the same video without the ad-breaks setup.
You must login or register to view this content.
4. Once you've setup your video in this manner you're all done
Now, keep in mind, you will NOT increase your CPM unless you get views that are longer than the time of your second ad-break. For example, if I were to get only 5 minute views, then the second ad wouldn't play, so the CPM wouldn't increase. So, to make this method work, you should get about 10 minute views to the video :yes:
I hope you guys enjoy this method and have fun doubling your cpm please leave feed back and feel free to ask questions this tutorial took me ages and i'm really proud i could give this to the ngu community so please use the fuck out of this method and if you share this anywhere else make sure you leave credits peace out ngu while i work on my next method
[/SIZE]You must login or register to view this content.
4. Once you've setup your video in this manner you're all done
Now, keep in mind, you will NOT increase your CPM unless you get views that are longer than the time of your second ad-break. For example, if I were to get only 5 minute views, then the second ad wouldn't play, so the CPM wouldn't increase. So, to make this method work, you should get about 10 minute views to the video :yes:
I hope you guys enjoy this method and have fun doubling your cpm please leave feed back and feel free to ask questions this tutorial took me ages and i'm really proud i could give this to the ngu community so please use the fuck out of this method and if you share this anywhere else make sure you leave credits
peace out ngu while i work on my next method p.s i know some people may know this method but this guide is for the people that don't know
This is great. Thank you for this!
10-29-2015, 10:26 PM
#5
NUKES_mAn97
Are you high?
11-07-2015, 10:27 AM
#7
NUKES_mAn97
Are you high?
12-30-2015, 10:39 PM
#9
NUKES_mAn97
Are you high?
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
