Post: How to keep randoms from spraying your Modded Model 1887
Options
05-26-2012, 12:33 PM
#1
MrBrett_
Grunt
Anyway this is a way of keeping The FMJ or No attachment Model Full Auto without that happening. When modding your Model set the fire mode to Double Barrel. Even though there is only 1 model when its on double barrel You can use both triggers to shoot it as if it were akimbo. Which will make holding just R1 assuming your in Default button layout will be single shot same with holding the other trigger L1 (again assuming your in Default) also single shot. To use Full Auto you will need to hold down Both triggers at the same time. So the odds are the random people pulling out the Model and holding down R1 will think its only a single shot shotgun and would never expect to hold both triggers. Ive used this for awhile and almost nobody has figured out why i had full auto and they didnt.
To set your Model 1887 to double barrel:
For Regular Model Go to Offset - 00160681
Then Starting at the body(Offset- 00160702) which is 1 after _mp at 3C (Highlight starting at the body til the length at the bottom says 3C)
[ATTACH=CONFIG]17197[/ATTACH]
Now at 3C the next four values will hold the firetype. Since this example is for full auto yours Will 00 00 00 00.
AS IN THE PICTURE PUT A 5 At the end 00 00 00 05 That is now double barrel
Alright well hope this helps and isnt a stupid post you can skype for more help on weapon modding, I tried explaining the best i could, And i dont believe anyones had this idea but idk i didnt find it posted anywhere so yeah. This should be good until they eventually figure it out
and sorry if the picture is too small... I hate doing screen shot shit
Refer to Aerosoul94s great TUT on Weapon Modding For More Help You must login or register to view this content.
06-19-2012, 08:14 PM
#5
ReeZ-_-MoDz
Haxor!
Originally posted by MrBrett
This is For All people who use Full Auto on their Model 1887s with FMJ or No Attachment and Hate when random people in games when your host pull out a model or Copy your class and just start Spraying. Nothing Pisses me off More.
Anyway this is a way of keeping The FMJ or No attachment Model Full Auto without that happening. When modding your Model set the fire mode to Double Barrel. Even though there is only 1 model when its on double barrel You can use both triggers to shoot it as if it were akimbo. Which will make holding just R1 assuming your in Default button layout will be single shot same with holding the other trigger L1 (again assuming your in Default) also single shot. To use Full Auto you will need to hold down Both triggers at the same time. So the odds are the random people pulling out the Model and holding down R1 will think its only a single shot shotgun and would never expect to hold both triggers. Ive used this for awhile and almost nobody has figured out why i had full auto and they didnt.
To set your Model 1887 to double barrel:
For Regular Model Go to Offset - 00160681
Then Starting at the body(Offset- 00160702) which is 1 after _mp at 3C (Highlight starting at the body til the length at the bottom says 3C)
[ATTACH=CONFIG]17197[/ATTACH]
Now at 3C the next four values will hold the firetype. Since this example is for full auto yours Will 00 00 00 00.
AS IN THE PICTURE PUT A 5 At the end 00 00 00 05 That is now double barrel
Alright well hope this helps and isnt a stupid post you can skype for more help on weapon modding, I tried explaining the best i could, And i dont believe anyones had this idea but idk i didnt find it posted anywhere so yeah. This should be good until they eventually figure it out
and sorry if the picture is too small... I hate doing screen shot shit
Refer to Aerosoul94s great TUT on Weapon Modding For More Help You must login or register to view this content.
Anyway this is a way of keeping The FMJ or No attachment Model Full Auto without that happening. When modding your Model set the fire mode to Double Barrel. Even though there is only 1 model when its on double barrel You can use both triggers to shoot it as if it were akimbo. Which will make holding just R1 assuming your in Default button layout will be single shot same with holding the other trigger L1 (again assuming your in Default) also single shot. To use Full Auto you will need to hold down Both triggers at the same time. So the odds are the random people pulling out the Model and holding down R1 will think its only a single shot shotgun and would never expect to hold both triggers. Ive used this for awhile and almost nobody has figured out why i had full auto and they didnt.
To set your Model 1887 to double barrel:
For Regular Model Go to Offset - 00160681
Then Starting at the body(Offset- 00160702) which is 1 after _mp at 3C (Highlight starting at the body til the length at the bottom says 3C)
[ATTACH=CONFIG]17197[/ATTACH]
Now at 3C the next four values will hold the firetype. Since this example is for full auto yours Will 00 00 00 00.
AS IN THE PICTURE PUT A 5 At the end 00 00 00 05 That is now double barrel
Alright well hope this helps and isnt a stupid post you can skype for more help on weapon modding, I tried explaining the best i could, And i dont believe anyones had this idea but idk i didnt find it posted anywhere so yeah. This should be good until they eventually figure it out
and sorry if the picture is too small... I hate doing screen shot shit
Refer to Aerosoul94s great TUT on Weapon Modding For More Help You must login or register to view this content.
hey man i wonder if i already have modded my models can i still do this or do i have to remove thm put in the originals and thn do this??
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
