Post: Windows 10 crashes then wont start
Options
04-05-2016, 08:03 PM
#1
Panda.
You talkin to me?
My windows 10 recently updated, maybe 3-4 days ago and ever since then my PC doesnt work right. I've searched the internet everyday trying to find a solution and I cant find one that works.
First, after the update, my computer started fine; until the next day. The morning after, it seemed to start normally. I logged in just fine but after about 30 seconds, the screen would "blink." It would go black for about half a second then turn back to normal. After this happing about 3 times every 30 seconds, Windows will crash. Or at least stop working. It wont allow me to click anything on screen which requires me to do a "hard restart" where i have to hold the power button down. Trying to turn the PC on after this happens, it just wont boot Windows. It'll show the windows 10 logo normally, with the little circle rotating beneath it, then go black, then show the windows 10 logo again with the circle lagging. Which again, requires me to turn it off. Sometimes it will turn off if I just push the power button once, but mostly I have to hold it down for it to go off.
Sometimes I get lucky. When Windows wont boot, and I push the power button once, it will turn off and once I turn it back on, it will loop over again and Windows will stop working after I log in and it blinks every 30 seconds.
After turning it off multiple times to get lucky again, it'll bring me to the log in screen where I can boot windows in safe mode and try some solutions I found after googling many things like "Service Exception Error"(which came up ONCE after the windows 10 logo), "Black screen with cursor"(which has also happened a few times), and "Windows 10 Crashing"(which I haven't gotten to try yet considering I cant get it to start).
Ive deleted the security update that was bugged, restored to before the update, blocked new windows updates, used CCleaner, used the Device Manager that is under control panel to update drivers but the only driver that it says is outdated is my 2nd monitor, but when I go to update it, it says it's up to date.
I appreciate any feedback.
04-05-2016, 08:14 PM
#2
Ethen
Banned
Originally posted by Panda.
Please take the time to read this. I need to find the solution without taking it into a shop.
My windows 10 recently updated, maybe 3-4 days ago and ever since then my PC doesnt work right. I've searched the internet everyday trying to find a solution and I cant find one that works.
First, after the update, my computer started fine; until the next day. The morning after, it seemed to start normally. I logged in just fine but after about 30 seconds, the screen would "blink." It would go black for about half a second then turn back to normal. After this happing about 3 times every 30 seconds, Windows will crash. Or at least stop working. It wont allow me to click anything on screen which requires me to do a "hard restart" where i have to hold the power button down. Trying to turn the PC on after this happens, it just wont boot Windows. It'll show the windows 10 logo normally, with the little circle rotating beneath it, then go black, then show the windows 10 logo again with the circle lagging. Which again, requires me to turn it off. Sometimes it will turn off if I just push the power button once, but mostly I have to hold it down for it to go off.
Sometimes I get lucky. When Windows wont boot, and I push the power button once, it will turn off and once I turn it back on, it will loop over again and Windows will stop working after I log in and it blinks every 30 seconds.
After turning it off multiple times to get lucky again, it'll bring me to the log in screen where I can boot windows in safe mode and try some solutions I found after googling many things like "Service Exception Error"(which came up ONCE after the windows 10 logo), "Black screen with cursor"(which has also happened a few times), and "Windows 10 Crashing"(which I haven't gotten to try yet considering I cant get it to start).
Ive deleted the security update that was bugged, restored to before the update, blocked new windows updates, used CCleaner, used the Device Manager that is under control panel to update drivers but the only driver that it says is outdated is my 2nd monitor, but when I go to update it, it says it's up to date.
I appreciate any feedback.
My windows 10 recently updated, maybe 3-4 days ago and ever since then my PC doesnt work right. I've searched the internet everyday trying to find a solution and I cant find one that works.
First, after the update, my computer started fine; until the next day. The morning after, it seemed to start normally. I logged in just fine but after about 30 seconds, the screen would "blink." It would go black for about half a second then turn back to normal. After this happing about 3 times every 30 seconds, Windows will crash. Or at least stop working. It wont allow me to click anything on screen which requires me to do a "hard restart" where i have to hold the power button down. Trying to turn the PC on after this happens, it just wont boot Windows. It'll show the windows 10 logo normally, with the little circle rotating beneath it, then go black, then show the windows 10 logo again with the circle lagging. Which again, requires me to turn it off. Sometimes it will turn off if I just push the power button once, but mostly I have to hold it down for it to go off.
Sometimes I get lucky. When Windows wont boot, and I push the power button once, it will turn off and once I turn it back on, it will loop over again and Windows will stop working after I log in and it blinks every 30 seconds.
After turning it off multiple times to get lucky again, it'll bring me to the log in screen where I can boot windows in safe mode and try some solutions I found after googling many things like "Service Exception Error"(which came up ONCE after the windows 10 logo), "Black screen with cursor"(which has also happened a few times), and "Windows 10 Crashing"(which I haven't gotten to try yet considering I cant get it to start).
Ive deleted the security update that was bugged, restored to before the update, blocked new windows updates, used CCleaner, used the Device Manager that is under control panel to update drivers but the only driver that it says is outdated is my 2nd monitor, but when I go to update it, it says it's up to date.
I appreciate any feedback.
Do you have Windows 7 or 8 on a disc you can restore to. This maybe due to something going wrong on installation, so you could go back to a previous version, or try make a bootable usb if you have another pc or laptop, but the iso on the usb.
04-05-2016, 08:18 PM
#3
v1rk
Grunt
Originally posted by Panda.
Please take the time to read this. I need to find the solution without taking it into a shop.
My windows 10 recently updated, maybe 3-4 days ago and ever since then my PC doesnt work right. I've searched the internet everyday trying to find a solution and I cant find one that works.
First, after the update, my computer started fine; until the next day. The morning after, it seemed to start normally. I logged in just fine but after about 30 seconds, the screen would "blink." It would go black for about half a second then turn back to normal. After this happing about 3 times every 30 seconds, Windows will crash. Or at least stop working. It wont allow me to click anything on screen which requires me to do a "hard restart" where i have to hold the power button down. Trying to turn the PC on after this happens, it just wont boot Windows. It'll show the windows 10 logo normally, with the little circle rotating beneath it, then go black, then show the windows 10 logo again with the circle lagging. Which again, requires me to turn it off. Sometimes it will turn off if I just push the power button once, but mostly I have to hold it down for it to go off.
Sometimes I get lucky. When Windows wont boot, and I push the power button once, it will turn off and once I turn it back on, it will loop over again and Windows will stop working after I log in and it blinks every 30 seconds.
After turning it off multiple times to get lucky again, it'll bring me to the log in screen where I can boot windows in safe mode and try some solutions I found after googling many things like "Service Exception Error"(which came up ONCE after the windows 10 logo), "Black screen with cursor"(which has also happened a few times), and "Windows 10 Crashing"(which I haven't gotten to try yet considering I cant get it to start).
Ive deleted the security update that was bugged, restored to before the update, blocked new windows updates, used CCleaner, used the Device Manager that is under control panel to update drivers but the only driver that it says is outdated is my 2nd monitor, but when I go to update it, it says it's up to date.
I appreciate any feedback.
Hello mate
just reset your laptop .have a look on this link
You must login or register to view this content.
My windows 10 recently updated, maybe 3-4 days ago and ever since then my PC doesnt work right. I've searched the internet everyday trying to find a solution and I cant find one that works.
First, after the update, my computer started fine; until the next day. The morning after, it seemed to start normally. I logged in just fine but after about 30 seconds, the screen would "blink." It would go black for about half a second then turn back to normal. After this happing about 3 times every 30 seconds, Windows will crash. Or at least stop working. It wont allow me to click anything on screen which requires me to do a "hard restart" where i have to hold the power button down. Trying to turn the PC on after this happens, it just wont boot Windows. It'll show the windows 10 logo normally, with the little circle rotating beneath it, then go black, then show the windows 10 logo again with the circle lagging. Which again, requires me to turn it off. Sometimes it will turn off if I just push the power button once, but mostly I have to hold it down for it to go off.
Sometimes I get lucky. When Windows wont boot, and I push the power button once, it will turn off and once I turn it back on, it will loop over again and Windows will stop working after I log in and it blinks every 30 seconds.
After turning it off multiple times to get lucky again, it'll bring me to the log in screen where I can boot windows in safe mode and try some solutions I found after googling many things like "Service Exception Error"(which came up ONCE after the windows 10 logo), "Black screen with cursor"(which has also happened a few times), and "Windows 10 Crashing"(which I haven't gotten to try yet considering I cant get it to start).
Ive deleted the security update that was bugged, restored to before the update, blocked new windows updates, used CCleaner, used the Device Manager that is under control panel to update drivers but the only driver that it says is outdated is my 2nd monitor, but when I go to update it, it says it's up to date.
I appreciate any feedback.
Hello mate
just reset your laptop .have a look on this link
You must login or register to view this content.
04-05-2016, 08:19 PM
#4
Panda.
You talkin to me?
Originally posted by Ythen
Do you have Windows 7 or 8 on a disc you can restore to. This maybe due to something going wrong on installation, so you could go back to a previous version, or try make a bootable usb if you have another pc or laptop, but the iso on the usb.
I do not. After getting my pc built, I took it to a shop for them to set it all up and put windows 7 on it.
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
