Thing's you need.
1. A Swiss army knife
2. Electronic plastic card (credit card etc)
You must login or register to view this content.

If you want to exact get a motherboard that physically is compatible with your CPU!

Finding the bent pins.

To do this you need good eyes and steady hands.

Hold the CPU on your eye height and close selected eye.
Now with your open eye move it across the CPU, your doing it right when pins aligns on rows.
If you don't see anything yet rotate the CPU 45degrees and try again until you find the problem.

You must login or register to view this content.

Take your knife and wedge it under the bent pin and stand it up. Do this until all pins are proportionately straight.
Now push your card in the empty space between the pins. DON'T RUN THE CARD BETWEEN THE PINS OR IT WILL BEND MORE OF THEM.
Do it from a different angle to re-alling the pins to columns.
You must login or register to view this content.

Testin your work.
When you're stopped correcting your pins it's time to test the CPU.
Try to put the processor in the in the processor socket from one corner to other. If it doesn't fit in try correcting the pins from the point where it didn't stopped going into the socket.
You must login or register to view this content.
When it goes into the socket you're finshed!