You must login or register to view this content.

As anyone who owns one of these routers knows, the default administration interface is very limited, many features that this router supports have been locked out by sky (DNS settings, Quality of Service, IP Filtering etc.). The default sky firmware actually has a secondary Sagem web interface with access to all these settings, but it is turned off by default (and it cannot be changed from the sky web interface).

This custom firmware updates the configuration area of the router to allow access to this advanced web interface.

Warnings: Read these carefully!

If your router gets unplugged / there is a power cut during the upgrade process your router may become inoperable. However unlikely this may seem, it is a very real possibility and this procedure should only be attempted if you have a backup router.
All your router settings will be lost during the upgrade process, INCLUDING the factory default settings (wireless SSID, wireless key and MAC address). If somthing has happened to the sticker on the base of your router detailing this information DO NOT flash this firmware. Without these details you will not be able to connect to the internet.
It is highly recommended that you connect to your router directly via ethernet cable and NOT through wireless while updating.
It is highly recommended that your disconnect your router from the phone line while updating.
All though I have tested this firmware extensively, there is a chance that something may go wrong. I will not be held responsible for any harm that comes to your router due to use of this firmware.
Sky automatic updates have not been disabled by default, if they release a firmware or configuration update in the future it may overwrite this firmware and disable the extra features.

Advantages

The full sagem web interface is enabled by default, giving access to a large amount of previously unavailable settings.
This firmware will work with Sky Router Tool.
Contains a 'lite' version of Sky Router Tool which runs on the router.

How to install it

Before continuing make sure you read, and understand all of the warnings above
Download the new firmware from You must login or register to view this content.
Log into the sky web interface and select "Maintenance" followed by "Router Upgrade"
Browse for the firmware file then click "Upload". Make sure you do not unplug your router after starting the upgrade process, doing so could permanently break it.
Wait about 2 minutes before trying the next step.
After 2 minuites visit You must login or register to view this content. (if you previously had changed your router's ip address it will now have reverted to the default).
If all went well you should be greeted by the following screen:

You must login or register to view this content.

Type in the details it asks for, making sure they exactly match those on the bottom of your router
After clicking save you should get the following screen and your router will reboot:

You must login or register to view this content.

Sagem Web Admin Access

The Sagem web admin can be accessed either from the link on the front page of the sky interface, or by visiting You must login or register to view this content..

Sky Router Tool Lite

Sky Router Tool Lite can be accessed either from the link on the front page of the sky interface, or by visiting You must login or register to view this content..

The following features are available:

Connection Details
Process List
ADSL Statistics Graphs
Ping
Setting SNR Margin
Running arbitary commands

Sky Auto Update

The sky automatic firmware update is still enabled with this firmware. If Sky release a firmware update, it may overwrite this modified firmware.

Firmware and tools created by mrmt32