Post: How to get the best quality out of your capture device!
Options
02-08-2011, 05:14 PM
#1
NyanCat
trololo
Here is a preview of what you can get:
SETTING UP
START OFF BY DOWNLOADING THIS RAR FILE! IF YOU DONT HAVE WINRAR, GOOGLE IT!
You must login or register to view this content.
1. Open up the folder PluginZ
2. Open up huffyuv-2.1.1
3. Right click huffyuv.inf and press install
4. Move the file called deinterlaceAreaBased.vdf (located in pluginZ folder) to the folder called plugins in
virtualDub folder.
5. Right click x264vfw... (located in pluginZ as well.) and run it as administrator. Install it.
CAPTURING
6. Run virtualdub.
7. Cick "capture avi" (located under the tab file)
8. Click the tab called "device". Then click your "capture device". (For ex. Dazzle dvc 100 video device)
9. Click the tab called "video". Then click "compression".
10. Select "huffyuv"
11. At audio select your capture device aswell.
12. Click the tab called "capture" and click timing then copy these settings: You must login or register to view this content.
13. Click the tab called "video" and then click capture pin. Select PAL if your in europe, NTSC if in america
and SECAM if in Asia. The letter (PAL_B for example) behind those doesnt really matter, but if your gameplay
looks a bit wierd you should defo try everysingle on out.
14. Click the tab called "video" and click preview.
15. Click "video" again and click levels. Mess with these levels until you've found something you like.
16. Click "video" again and click No display.
17. Now you can start recording! =D
COMPRESSING
(and adding filters) (optional)
12. When your done capturing open up virtualdub again.
13. Click the tab called "file" (dont go to capture avi)
14. Click "open video file" and locate your videofile.
15. Click the tab called "Video" and click "filters".
16. Click "Add".
17. Find and click deinterlaceareabased.
18. Click OK then OK again.
19. Click the tab called "video" and then click compression
19. Click x264vfw... and click OK
20. Click the tab "file" and click "save as avi"
21. When its done you can delete the old file.
Doing this will lower the size of your file without quality loss.
FAQ
Q: Why does my audio get out of sync?
A: There are many reasons to why your audio is out of sync.
1. Your timing settings isnt set properly. To fix this follow the following steps:
1a. Click the tab called capture and then click timing. Take a look at this picture and copy what i've written.
You must login or register to view this content.
2. Your capturing in a different framerate then the source. PAL is 25. NTSC is 29.97. Secam is 25 aswell.
2a. To fix this click the tab in the bottom right corner and change it to either one of the above depending
on what region you live in.
3. Your dropping and skipping frames.
3a. Your computer isnt good enough, this shouldnt be an issue.
4. Your computer is ****ed up
4a. Running as administrator might help.
Q: MY AUDIO IS STILL OUT OF SYNC!!!!111 @@@@@@@@@@@@@@
A: Try to run virtual dub as administrator or
watch this youtube video:
Q: My audio is some milliseconds behind
A: Open up your footage in sony vegas and drag the audio left as little as you can.
Q: z0000000000MG MY VIDEO IS BLACK AND WHITE!!!!
A: Your video pin settings arent set properly. To fix this click: Click the tab called "video" and then click capture pin. Select PAL if your in europe, NTSC if in america
and SECAM if in Asia. The letter (PAL_B for example) behind those doesnt really matter, but if your gameplay
looks a bit wierd you should defo try every single on out.
Q: Why cant I capture at 60 fps?
A: Most of the capture cards cant capture at 60 fps. The dazzle platinium and EasyCap 60 are the only ones i think.
Q: I cant find any audio device under audio
A: Use the other virtualdub version in the zipfile. ("USE THIS IF NO AUDIO" is the name of the folder.
Remember to render in 1280:760. Adding some cc will also improve quality.
Rep is appreciated. :mudkip:
The following 3 users say thank you to NyanCat for this useful post:
03-14-2011, 07:05 AM
#11
iOrochimaru
Immortality Technique
Originally posted by Sylux
In this tutorial I will teach you how to get the best quality out of your capture card. Using this method almost gives you a guarantee that you not will be getting audio lag.
Here is a preview of what you can get: You must login or register to view this content.
START OFF BY DOWNLOADING THIS RAR FILE! IF YOU DONT HAVE WINRAR, GOOGLE IT!
You must login or register to view this content.
1. Open up the folder PluginZ
2. Open up huffyuv-2.1.1
3. Right click huffyuv.inf and press install
4. Move the file called deinterlaceAreaBased.vdf (located in pluginZ folder) to the folder called plugins in
virtualDub folder.
5. Right click x264vfw... (located in pluginZ as well.) and run it as administrator. Install it.
6. Run virtualdub.
7. Cick "capture avi" (located under the tab file)
8. Click the tab called "device". Then click your "capture device". (For ex. Dazzle dvc 100 video device)
9. Click the tab called "video". Then click "compression".
10. Select "huffyuv"
11. At audio select your capture device aswell.
12. Click the tab called "capture" and click timing then copy these settings: You must login or register to view this content.
13. Click the tab called "video" and then click capture pin. Select PAL if your in europe, NTSC if in america
and SECAM if in Asia. The letter (PAL_B for example) behind those doesnt really matter, but if your gameplay
looks a bit wierd you should defo try everysingle on out.
14. Click the tab called "video" and click preview.
15. Click "video" again and click levels. Mess with these levels until you've found something you like.
16. Click "video" again and click No display.
17. Now you can start recording! =D
(and adding filters) (optional)
12. When your done capturing open up virtualdub again.
13. Click the tab called "file" (dont go to capture avi)
14. Click "open video file" and locate your videofile.
15. Click the tab called "Video" and click "filters".
16. Click "Add".
17. Find and click deinterlaceareabased.
18. Click OK then OK again.
19. Click the tab called "video" and then click compression
19. Click x264vfw... and click OK
20. Click the tab "file" and click "save as avi"
21. When its done you can delete the old file.
Doing this will lower the size of your file without quality loss.
Q: Why does my audio get out of sync?
A: There are many reasons to why your audio is out of sync.
1. Your timing settings isnt set properly. To fix this follow the following steps:
1a. Click the tab called capture and then click timing. Take a look at this picture and copy what i've written.
You must login or register to view this content.
2. Your capturing in a different framerate then the source. PAL is 25. NTSC is 29.97. Secam is 25 aswell.
2a. To fix this click the tab in the bottom right corner and change it to either one of the above depending
on what region you live in.
3. Your dropping and skipping frames.
3a. Your computer isnt good enough, this shouldnt be an issue.
4. Your computer is ****ed up
4a. Running as administrator might help.
Q: MY AUDIO IS STILL OUT OF SYNC!!!!111 @@@@@@@@@@@@@@
A: Try to run virtual dub as administrator or
watch this youtube video: You must login or register to view this content.
Q: My audio is some milliseconds behind
A: Open up your footage in sony vegas and drag the audio left as little as you can.
Q: z0000000000MG MY VIDEO IS BLACK AND WHITE!!!!
A: Your video pin settings arent set properly. To fix this click: Click the tab called "video" and then click capture pin. Select PAL if your in europe, NTSC if in america
and SECAM if in Asia. The letter (PAL_B for example) behind those doesnt really matter, but if your gameplay
looks a bit wierd you should defo try every single on out.
Q: Why cant I capture at 60 fps?
A: Most of the capture cards cant capture at 60 fps. The dazzle platinium and EasyCap 60 are the only ones i think.
Q: I cant find any audio device under audio
A: Use the other virtualdub version in the zipfile. ("USE THIS IF NO AUDIO" is the name of the folder.
Remember to render in 1280:760. Adding some cc will also improve quality.
Rep is appreciated. :mudkip:
Here is a preview of what you can get: You must login or register to view this content.
SETTING UP
START OFF BY DOWNLOADING THIS RAR FILE! IF YOU DONT HAVE WINRAR, GOOGLE IT!
You must login or register to view this content.
1. Open up the folder PluginZ
2. Open up huffyuv-2.1.1
3. Right click huffyuv.inf and press install
4. Move the file called deinterlaceAreaBased.vdf (located in pluginZ folder) to the folder called plugins in
virtualDub folder.
5. Right click x264vfw... (located in pluginZ as well.) and run it as administrator. Install it.
CAPTURING
6. Run virtualdub.
7. Cick "capture avi" (located under the tab file)
8. Click the tab called "device". Then click your "capture device". (For ex. Dazzle dvc 100 video device)
9. Click the tab called "video". Then click "compression".
10. Select "huffyuv"
11. At audio select your capture device aswell.
12. Click the tab called "capture" and click timing then copy these settings: You must login or register to view this content.
13. Click the tab called "video" and then click capture pin. Select PAL if your in europe, NTSC if in america
and SECAM if in Asia. The letter (PAL_B for example) behind those doesnt really matter, but if your gameplay
looks a bit wierd you should defo try everysingle on out.
14. Click the tab called "video" and click preview.
15. Click "video" again and click levels. Mess with these levels until you've found something you like.
16. Click "video" again and click No display.
17. Now you can start recording! =D
COMPRESSING
(and adding filters) (optional)
12. When your done capturing open up virtualdub again.
13. Click the tab called "file" (dont go to capture avi)
14. Click "open video file" and locate your videofile.
15. Click the tab called "Video" and click "filters".
16. Click "Add".
17. Find and click deinterlaceareabased.
18. Click OK then OK again.
19. Click the tab called "video" and then click compression
19. Click x264vfw... and click OK
20. Click the tab "file" and click "save as avi"
21. When its done you can delete the old file.
Doing this will lower the size of your file without quality loss.
FAQ
Q: Why does my audio get out of sync?
A: There are many reasons to why your audio is out of sync.
1. Your timing settings isnt set properly. To fix this follow the following steps:
1a. Click the tab called capture and then click timing. Take a look at this picture and copy what i've written.
You must login or register to view this content.
2. Your capturing in a different framerate then the source. PAL is 25. NTSC is 29.97. Secam is 25 aswell.
2a. To fix this click the tab in the bottom right corner and change it to either one of the above depending
on what region you live in.
3. Your dropping and skipping frames.
3a. Your computer isnt good enough, this shouldnt be an issue.
4. Your computer is ****ed up
4a. Running as administrator might help.
Q: MY AUDIO IS STILL OUT OF SYNC!!!!111 @@@@@@@@@@@@@@
A: Try to run virtual dub as administrator or
watch this youtube video: You must login or register to view this content.
Q: My audio is some milliseconds behind
A: Open up your footage in sony vegas and drag the audio left as little as you can.
Q: z0000000000MG MY VIDEO IS BLACK AND WHITE!!!!
A: Your video pin settings arent set properly. To fix this click: Click the tab called "video" and then click capture pin. Select PAL if your in europe, NTSC if in america
and SECAM if in Asia. The letter (PAL_B for example) behind those doesnt really matter, but if your gameplay
looks a bit wierd you should defo try every single on out.
Q: Why cant I capture at 60 fps?
A: Most of the capture cards cant capture at 60 fps. The dazzle platinium and EasyCap 60 are the only ones i think.
Q: I cant find any audio device under audio
A: Use the other virtualdub version in the zipfile. ("USE THIS IF NO AUDIO" is the name of the folder.
Remember to render in 1280:760. Adding some cc will also improve quality.
Rep is appreciated. :mudkip:
You earned a very special trophy given by Black Sheep.
You must login or register to view this content.
03-21-2011, 01:46 AM
#12
wite_guy
I-<3-2-1/2-6
Originally posted by Sylux
In this tutorial I will teach you how to get the best quality out of your capture card. Using this method almost gives you a guarantee that you not will be getting audio lag.
Here is a preview of what you can get: You must login or register to view this content.
START OFF BY DOWNLOADING THIS RAR FILE! IF YOU DONT HAVE WINRAR, GOOGLE IT!
You must login or register to view this content.
1. Open up the folder PluginZ
2. Open up huffyuv-2.1.1
3. Right click huffyuv.inf and press install
4. Move the file called deinterlaceAreaBased.vdf (located in pluginZ folder) to the folder called plugins in
virtualDub folder.
5. Right click x264vfw... (located in pluginZ as well.) and run it as administrator. Install it.
6. Run virtualdub.
7. Cick "capture avi" (located under the tab file)
8. Click the tab called "device". Then click your "capture device". (For ex. Dazzle dvc 100 video device)
9. Click the tab called "video". Then click "compression".
10. Select "huffyuv"
11. At audio select your capture device aswell.
12. Click the tab called "capture" and click timing then copy these settings: You must login or register to view this content.
13. Click the tab called "video" and then click capture pin. Select PAL if your in europe, NTSC if in america
and SECAM if in Asia. The letter (PAL_B for example) behind those doesnt really matter, but if your gameplay
looks a bit wierd you should defo try everysingle on out.
14. Click the tab called "video" and click preview.
15. Click "video" again and click levels. Mess with these levels until you've found something you like.
16. Click "video" again and click No display.
17. Now you can start recording! =D
(and adding filters) (optional)
12. When your done capturing open up virtualdub again.
13. Click the tab called "file" (dont go to capture avi)
14. Click "open video file" and locate your videofile.
15. Click the tab called "Video" and click "filters".
16. Click "Add".
17. Find and click deinterlaceareabased.
18. Click OK then OK again.
19. Click the tab called "video" and then click compression
19. Click x264vfw... and click OK
20. Click the tab "file" and click "save as avi"
21. When its done you can delete the old file.
Doing this will lower the size of your file without quality loss.
Q: Why does my audio get out of sync?
A: There are many reasons to why your audio is out of sync.
1. Your timing settings isnt set properly. To fix this follow the following steps:
1a. Click the tab called capture and then click timing. Take a look at this picture and copy what i've written.
You must login or register to view this content.
2. Your capturing in a different framerate then the source. PAL is 25. NTSC is 29.97. Secam is 25 aswell.
2a. To fix this click the tab in the bottom right corner and change it to either one of the above depending
on what region you live in.
3. Your dropping and skipping frames.
3a. Your computer isnt good enough, this shouldnt be an issue.
4. Your computer is ****ed up
4a. Running as administrator might help.
Q: MY AUDIO IS STILL OUT OF SYNC!!!!111 @@@@@@@@@@@@@@
A: Try to run virtual dub as administrator or
watch this youtube video: You must login or register to view this content.
Q: My audio is some milliseconds behind
A: Open up your footage in sony vegas and drag the audio left as little as you can.
Q: z0000000000MG MY VIDEO IS BLACK AND WHITE!!!!
A: Your video pin settings arent set properly. To fix this click: Click the tab called "video" and then click capture pin. Select PAL if your in europe, NTSC if in america
and SECAM if in Asia. The letter (PAL_B for example) behind those doesnt really matter, but if your gameplay
looks a bit wierd you should defo try every single on out.
Q: Why cant I capture at 60 fps?
A: Most of the capture cards cant capture at 60 fps. The dazzle platinium and EasyCap 60 are the only ones i think.
Q: I cant find any audio device under audio
A: Use the other virtualdub version in the zipfile. ("USE THIS IF NO AUDIO" is the name of the folder.
Remember to render in 1280:760. Adding some cc will also improve quality.
Rep is appreciated. :mudkip:
Here is a preview of what you can get: You must login or register to view this content.
SETTING UP
START OFF BY DOWNLOADING THIS RAR FILE! IF YOU DONT HAVE WINRAR, GOOGLE IT!
You must login or register to view this content.
1. Open up the folder PluginZ
2. Open up huffyuv-2.1.1
3. Right click huffyuv.inf and press install
4. Move the file called deinterlaceAreaBased.vdf (located in pluginZ folder) to the folder called plugins in
virtualDub folder.
5. Right click x264vfw... (located in pluginZ as well.) and run it as administrator. Install it.
CAPTURING
6. Run virtualdub.
7. Cick "capture avi" (located under the tab file)
8. Click the tab called "device". Then click your "capture device". (For ex. Dazzle dvc 100 video device)
9. Click the tab called "video". Then click "compression".
10. Select "huffyuv"
11. At audio select your capture device aswell.
12. Click the tab called "capture" and click timing then copy these settings: You must login or register to view this content.
13. Click the tab called "video" and then click capture pin. Select PAL if your in europe, NTSC if in america
and SECAM if in Asia. The letter (PAL_B for example) behind those doesnt really matter, but if your gameplay
looks a bit wierd you should defo try everysingle on out.
14. Click the tab called "video" and click preview.
15. Click "video" again and click levels. Mess with these levels until you've found something you like.
16. Click "video" again and click No display.
17. Now you can start recording! =D
COMPRESSING
(and adding filters) (optional)
12. When your done capturing open up virtualdub again.
13. Click the tab called "file" (dont go to capture avi)
14. Click "open video file" and locate your videofile.
15. Click the tab called "Video" and click "filters".
16. Click "Add".
17. Find and click deinterlaceareabased.
18. Click OK then OK again.
19. Click the tab called "video" and then click compression
19. Click x264vfw... and click OK
20. Click the tab "file" and click "save as avi"
21. When its done you can delete the old file.
Doing this will lower the size of your file without quality loss.
FAQ
Q: Why does my audio get out of sync?
A: There are many reasons to why your audio is out of sync.
1. Your timing settings isnt set properly. To fix this follow the following steps:
1a. Click the tab called capture and then click timing. Take a look at this picture and copy what i've written.
You must login or register to view this content.
2. Your capturing in a different framerate then the source. PAL is 25. NTSC is 29.97. Secam is 25 aswell.
2a. To fix this click the tab in the bottom right corner and change it to either one of the above depending
on what region you live in.
3. Your dropping and skipping frames.
3a. Your computer isnt good enough, this shouldnt be an issue.
4. Your computer is ****ed up
4a. Running as administrator might help.
Q: MY AUDIO IS STILL OUT OF SYNC!!!!111 @@@@@@@@@@@@@@
A: Try to run virtual dub as administrator or
watch this youtube video: You must login or register to view this content.
Q: My audio is some milliseconds behind
A: Open up your footage in sony vegas and drag the audio left as little as you can.
Q: z0000000000MG MY VIDEO IS BLACK AND WHITE!!!!
A: Your video pin settings arent set properly. To fix this click: Click the tab called "video" and then click capture pin. Select PAL if your in europe, NTSC if in america
and SECAM if in Asia. The letter (PAL_B for example) behind those doesnt really matter, but if your gameplay
looks a bit wierd you should defo try every single on out.
Q: Why cant I capture at 60 fps?
A: Most of the capture cards cant capture at 60 fps. The dazzle platinium and EasyCap 60 are the only ones i think.
Q: I cant find any audio device under audio
A: Use the other virtualdub version in the zipfile. ("USE THIS IF NO AUDIO" is the name of the folder.
Remember to render in 1280:760. Adding some cc will also improve quality.
Rep is appreciated. :mudkip:
This should defo be sticky!!!
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
