Post: [RELEASE] Red-EyeX32's and Jakes625 - MW3 Save Editor
Options
03-05-2013, 08:25 PM
#1
Red-EyeX32
AstroCFG
This application allows you to open, view Modern Warfare 3 Game Saves DVARS And Values, this can be used for USB modding without any JB/CFW PS3.
Do not remove any files in the application's folder because then its not going to work correctly.
You must login or register to view this content.
You must login or register to view this content.
How To Use Tool:
Copy Modern Warfare 3 Game Save from PS3 to PC
Start Up Application and Open The Game Save Folder
Edit Game Saves however you like
Save All to save every changes to have made to the save files
Copy back to PS3 and you should be good to go.
Make Sure you got .NET Framework 4.5, Download Is Below!!
You must login or register to view this content.
You must login or register to view this content.
NOTE!:
- Make sure when you are saving, that the space left is greater than or equal to 3
- Also if you want more space, just remove some DVARS with the Remove button to gain more space
FAQ:
- If you are having problems opening your gamesave, make sure you have all three GPAD0_ files and that you have framework 4.5...
- If you cant save your gamesave, then make sure you have all the files that came with the tool in the .RAR file.
- If you are having problems with the MSCVR100.dll error, then go to this site You must login or register to view this content. and download the .exe.
If you have any problems or bugs, please send me a PM ("Private Message")
Thanks for downloading and please don't abuse a good and enjoyable game
Last edited by
Red-EyeX32 ; 11-07-2014 at 06:09 AM.
The following 94 users say thank you to Red-EyeX32 for this useful post:
^TPP^, -Google-, -JM-, {H} | Exception, ✯MeRK, βounceModz, Eddie Mac, AbusedTampon, Agent Beast, Alex-George-HnM, Ansity., Assassin_Ang_, BadChoicesZ, bilalansari, blindcutie, Choco, cod5cl, codmadz332, Gemi, Crashradio98-, CronicImpulse, DevilzFinest, ErasedDev, Dr. Mayham, EliteHackzPS3, ElPriPri, Farva, G-O-M-F-L, GangDePlot, Gian_, GodofHosting, iℜoCz, ikie34, iLLy-i, ImTrippinHoes, Insult, iTrexk, zL_j8hnb, ResistTheJamsha, jlyon11, joni_djESP, LBJ6 is Clutch, lecou189, Mad Scientist, Mango_Knife, Master0wn3r, matt0897, ModdersOnly-, Mr__Tenticals, Mui_G, MW2TopTenWORLD, Novarized, OmGRhys-x, Oscarhhh, passycat123, perrypus, Polaris, primetime43, Pseudo_Soldier, Cmd-X, RayJ_chugs, riggstq, Rogue_Wolf, Master Ro, SALEM-x, Samizzu321, SC58, skateralex88, Kronos, SnaY, SnD_Boosters, someoneelse12, Specter, SubTheKy3s, Talal1429, Terrorize 420, th3gersi, TheJaRniBoi, Txctical, UGz-, Vatinj, vSaBoTeuR x, Vyxo, Wattsy, wiii, X-GHOST-X, UserModz
04-29-2013, 03:51 AM
#164
Marsigne
Bounty hunter
Originally posted by EyeX32
This is coded in C#... Visual Basic is gay.
First of all, you didn't state what error you were having so how do I suppose to know what your problem is
And this works good awesomely on my computer sooo yea
First of all, you didn't state what error you were having so how do I suppose to know what your problem is
And this works good awesomely on my computer sooo yea
Originally posted by boogertwoshoes
i run all three OSes, plus linux, so...
and i'm quite aware that you are the creator of this,
there must be a problem or there wouldn't be an error when it saves.
all i'm saying is maybe you should check out why there is an error and what the problem is in your code, and fix it. then this tool would be GREAT.
it's constructive criticism, dude, so chill.
if you can't handle a little critique then you need to "upgrade"...
and aside from that, i would gladly fix it, but i don't work in visual basic, but instead in C, C++, and C#, and since this is your work, if you were a real developer you would want your work to be complete and fully operational i would think.
and i'm quite aware that you are the creator of this,
there must be a problem or there wouldn't be an error when it saves.
all i'm saying is maybe you should check out why there is an error and what the problem is in your code, and fix it. then this tool would be GREAT.
it's constructive criticism, dude, so chill.
if you can't handle a little critique then you need to "upgrade"...
and aside from that, i would gladly fix it, but i don't work in visual basic, but instead in C, C++, and C#, and since this is your work, if you were a real developer you would want your work to be complete and fully operational i would think.
Actually they do it bad, or they miss 1 additional step, which is my case. If Red-EyeX32, the creator of the program alongside with Jakes625, say that it works perfectly for him, then that means that it work, as most of people say so. The case of mine is that at first I couldn't have the editted vars to work, I tried to edit vars, save, then open again, and they were there, everything ok but when I go in-game, it didn't work. I tried going to campaign, nothing work, going to campaign then save to make vars work on Spec Ops, but it doesn't even work on Spec Ops. I contacted help in the thread and Red-EyeX32 ted to help me, but unafortunately he couldn't resolve it, he tried helping me a lot though. At first I downloaded pre-made 2000 health var gamesave, resigned it for my account id and it did work, but I still wanted to do my vars and stuff. After trying much and time after, I said, "Wait, there is a "Decrypt Gamesave" option for "Modders", why not use it for the gamesave? Then guess what? I made it to work. I was very happy that I got it to work as I always wanted. Then now the question is: "Why some people can just save and don't require additional step while others have to do an additional step?" That is entirely unknown. As I got it to work, if someone read this and you have problems with getting the vars work like I did, download the free [PS3] Save Resigner by K.G. Open the gamesave you want to edit vars, then press "Decrypt Game Save", locate the Decrypted file in the Decrypt folder, then open that gamesave in the MW3 Save Editor, edit the vars as you like, save, then go to Save Resigner and press "Encrypt and Resign". I got it to work this way, and I was one of "some" people that didn't got it to work, so the people that doesn't work, try doing this method. If for some entirely UNKNOWN reason that I know you are making it bad this method doesn't works, you can download a gamesave that already have the 2000 health var, and resign it for your account ID. It does work 100%! Unless the gamesave doesn't have 2000 var or is not setup correctly, if you make it all correct, it WILL work 100%! It's common sence. This have to fix the rest of "some" people that doesn't work for them, but as I said earlier, it will raise a question, "Why it does work on some without additional step and others not?" Well, as I said earlier, that is entirely unknown, but I am curious that I don't have to do this method on the MPDATA tool, but I have to do it with this tool. So the script doesn't have error in editting stuff, but I am curious in the Decrypting and Encrypting theme. Red-EyeX32, I think the method you are doing for Decrypting and Encrypting for the program it work for some users, and others not. That raises the same question again, but Red-EyeX32, I think that it might be fixed if it does the same Decrypting and Encrypting method as used in the MPDATA tool, but I don't know, I don't have much knowledge in scripting to be saying and I don't know if it have to be used other methods to get it to work. Just give it a check, and by meantime, Red-EyeX32 you can put this method to check if it work for the rest of "some" people that don't get it to work like I didn't got it to work earlier.
Additional Off-Topic, just pointing out: I never thought I would be inspired by someone who just to my eyes posted low words (131) compared to mine (579), (don't get it bad, I am just pointing out) I always want to defend the right people and your post made me remember what I made before. So thanks to boogertwoshoes and Red-EyeX32 who inspired me.
Last edited by
Marsigne ; 04-29-2013 at 04:06 AM.
04-30-2013, 04:10 PM
#167
xNIGHTMAREM0DZx
NextGenUpdate Elite
05-03-2013, 09:41 PM
#168
Red-EyeX32
AstroCFG
Originally posted by ramsert2
somebody can edit few DVARS
What are you trying to say?
05-04-2013, 12:59 PM
#169
makeabce
I defeated!
Originally posted by EyeX32
Well here I bring you Jakes625 and Me (Red-EyeX32) first Modern Warfare 3 Game Save Editor for PS3!!!!
This application allows you to open, view Modern Warfare 3 Game Saves DVARS And Values, this can be used for USB modding without any JB/CFW PS3.
Do not remove any files in the application's folder because then its not going to work correctly.
You must login or register to view this content.
You must login or register to view this content.
How To Use Tool:
Copy Modern Warfare 3 Game Save from PS3 to PC
Start Up Application and Open The Game Save Folder
Edit Game Saves however you like
Save All to save every changes to have made to the save files
Copy back to PS3 and you should be good to go.
Make Sure you got .NET Framework 4.5, Download Is Below!!
You must login or register to view this content.
You must login or register to view this content.
NOTE!:
- Make sure when you are saving, that the space left is greater than or equal to 3
- Also if you want more space, just remove some DVARS with the Remove button to gain more space
FAQ:
- If you are having problems opening your gamesave, make sure you have all three GPAD0_ files and that you have framework 4.5...
- If you cant save your gamesave, then make sure you have all the files that came with the tool in the .RAR file.
- If you are having problems with the MSCVR100.dll error, then go to this site You must login or register to view this content. and download the .exe.
If you have any problems or bugs, please send me a PM ("Private Message")
Thanks for downloading and please don't abuse a good and enjoyable game
This application allows you to open, view Modern Warfare 3 Game Saves DVARS And Values, this can be used for USB modding without any JB/CFW PS3.
Do not remove any files in the application's folder because then its not going to work correctly.
You must login or register to view this content.
You must login or register to view this content.
How To Use Tool:
Copy Modern Warfare 3 Game Save from PS3 to PC
Start Up Application and Open The Game Save Folder
Edit Game Saves however you like
Save All to save every changes to have made to the save files
Copy back to PS3 and you should be good to go.
Make Sure you got .NET Framework 4.5, Download Is Below!!
You must login or register to view this content.
You must login or register to view this content.
NOTE!:
- Make sure when you are saving, that the space left is greater than or equal to 3
- Also if you want more space, just remove some DVARS with the Remove button to gain more space
FAQ:
- If you are having problems opening your gamesave, make sure you have all three GPAD0_ files and that you have framework 4.5...
- If you cant save your gamesave, then make sure you have all the files that came with the tool in the .RAR file.
- If you are having problems with the MSCVR100.dll error, then go to this site You must login or register to view this content. and download the .exe.
If you have any problems or bugs, please send me a PM ("Private Message")
Thanks for downloading and please don't abuse a good and enjoyable game
Would dvar exec and value ../../../dev_usb000/something.cfg work? :troll:
05-04-2013, 05:49 PM
#170
Mikrofaser
Save Point
why does that comes, when i will save the data:
Restart method is not supported for this application type.
Restart method is not supported for this application type.
05-04-2013, 06:27 PM
#171
Red-EyeX32
AstroCFG
Originally posted by Mikrofaser
why does that comes, when i will save the data:
Restart method is not supported for this application type.
Restart method is not supported for this application type.
The application will still work... I don't know why it comes up tho
The save should work aswell.
Copyright © 2025, NextGenUpdate.
All Rights Reserved.
