Originally posted by lazzaaro
Well I have tried Editor 1.5 and 1.3.1 and I seriously cant get it to work . The spring rate and camber and all that changes except
the actual ride height it stays at stock ( -20 )
I tried to swap a Bentley suspension and a RX7 FDR and again all that changes are the spring rate etc not the ride height
I tried getting a completely stock car and putting a Fully Custom suspension and leave settings as is but still the same
I reset the suspension as you told me everytime but no good, its giving me a headache

what am I missing ?
Cars ive tried are FRS BRZ and Jag XKR
Originally posted by 192.168.1.1
You're not the only one, I'm also having the same problem, I've read through the posts and followed them to the T but I'm just not sure what's wrong. Everytime I do the swap and check it it's the regular height. I've stuck to slamming them through hex and even though they're glitchy they'll have to do.
the rideheight in game doens't mean to mutch! so if i correctly understand, when you guys swap suspension, the springrate and all that change but not the rideheight?
this is how i do it;
-first i reset the previous slamming by changing to stock suspension and change back to custom suspension
-i allways swap the suspension from the ferrari F10
-if i can't fit the rims into the wheelarches after a chassisswap by adjusting the camber, than i swap suspension from a Bentley racecar so i can raise the car a bit
-when you swap suspension from the Bentley, open 'tunesheet' and type 0 in the rideheighttab
note; when you have fitted the suspension of the F10, load to PS3, start game, save, load to editor and check your rideheight; it will be same the as the F10: 33
i did a chassisswap on allmost all my 185 hybrids and i had to fit the Bentley suspension only on mayby 4 or 5 cars.