Post: PS3 CFW trophy issue need help
06-27-2014, 02:36 AM #1
alchybear
< ^ > < ^ >
(adsbygoogle = window.adsbygoogle || []).push({}); I recently modded a ps3 from 4.55ofw to roger 4.55 cfw it was great worked perfect and fine. I did extra steps to test the memory and everything was good, well the person i hacked for they updated to the new firmware 4.60ofw like idiots. they came back to me to get it hacked again. well here is where everything went wtf. i ran a back up of their new nor bios and then rewrote the old bios that allows me to go straight to 4.55, but when i did this the ps3 still asked for 4.60 firmware and i was like wtf.....

so i converted to the old fashion factory downgrade after using the original 4.55 back up bios and the e3 tells me that the meltldr is not somthing i dnt remember now. so i took the origianl 4.60 back up and did it. well after the firmware is downgraded with the rogero 3.55 v2 it gives me the rsod. so since i was in service mode i did the rsod diag.self and i then updated to 4.55 rogero. now it has a issue with the trophies giving error error 80022090 when installing assains creed black flag from disc. and then black ops 1 goes black screen with a error sound. I looked at alot of shit and did the rebuild data base but still no luck. when i use multiman i can go to hdd/home/userxx/ but no trophy folder exist. i formated another hdd into it still no trophy. redid the firmware, still no trophy. does any one know a cure for this issue?
(adsbygoogle = window.adsbygoogle || []).push({});
06-27-2014, 05:47 AM #2
libra7ry
I’m too L33T
Originally posted by alchybear View Post
I recently modded a ps3 from 4.55ofw to roger 4.55 cfw it was great worked perfect and fine. I did extra steps to test the memory and everything was good, well the person i hacked for they updated to the new firmware 4.60ofw like idiots. they came back to me to get it hacked again. well here is where everything went wtf. i ran a back up of their new nor bios and then rewrote the old bios that allows me to go straight to 4.55, but when i did this the ps3 still asked for 4.60 firmware and i was like wtf.....

so i converted to the old fashion factory downgrade after using the original 4.55 back up bios and the e3 tells me that the meltldr is not somthing i dnt remember now. so i took the origianl 4.60 back up and did it. well after the firmware is downgraded with the rogero 3.55 v2 it gives me the rsod. so since i was in service mode i did the rsod diag.self and i then updated to 4.55 rogero. now it has a issue with the trophies giving error error 80022090 when installing assains creed black flag from disc. and then black ops 1 goes black screen with a error sound. I looked at alot of shit and did the rebuild data base but still no luck. when i use multiman i can go to hdd/home/userxx/ but no trophy folder exist. i formated another hdd into it still no trophy. redid the firmware, still no trophy. does any one know a cure for this issue?


Seems like you have done everything I would of done!
Like replace the HDD, reinstall the CFW and Rebuild the Database. I am assuming it worked before the 4.60 update.

Everything went haywire after patching up the bkpps3 with 4.55 patches and then downgrading the ole fashion way.

If anything,

If you have the copy of the game then, update back to 4.60 and then run the game so it can install the trophys and then reflash it again with the 4.55 patches. Regardless, if you get the "install 4.60 update" install Rogero 3.55 downgrader through recovery mode. Afterwards, QA flag and then install Rogero 3.55 v3.7 to get out off Rogero downgrader and then install the 4.55 CFW. Continue to check if the trophys worked

If you don't have a copy of the game then start by reflashing it again and see if it installs the trophys from AC.

With the the Black Ops1, you need a disc in the drive in order for it to work, including the setting in mutliman: external or internal and BD Mirror enabled.

good luck Alchy
06-27-2014, 06:19 AM #3
alchybear
< ^ > < ^ >
Originally posted by libra7ry View Post
Seems like you have done everything I would of done!
Like replace the HDD, reinstall the CFW and Rebuild the Database. I am assuming it worked before the 4.60 update.

Everything went haywire after patching up the bkpps3 with 4.55 patches and then downgrading the ole fashion way.

If anything,

If you have the copy of the game then, update back to 4.60 and then run the game so it can install the trophys and then reflash it again with the 4.55 patches. Regardless, if you get the "install 4.60 update" install Rogero 3.55 downgrader through recovery mode. Afterwards, QA flag and then install Rogero 3.55 v3.7 to get out off Rogero downgrader and then install the 4.55 CFW. Continue to check if the trophys worked

If you don't have a copy of the game then start by reflashing it again and see if it installs the trophys from AC.

With the the Black Ops1, you need a disc in the drive in order for it to work, including the setting in mutliman: external or internal and BD Mirror enabled.

good luck Alchy

none of it was back ups, all real disc games, and im just not understanding why my 4.55 nor back up was saying it needs 4.60, but since its on 4.55 rogero now im going to install official 4.55 firmware and then install the 4.55 back up memory when the guy comes back tomorrow to remove anything i may have caused during the old fashion downgrade. i just hope it works, then again its probrably time for me to get a new e3 ribbon if its the main issue. but still il lget a back up over everything before writing to that damn nor if any one else has any help please help.

Copyright © 2026, NextGenUpdate.
All Rights Reserved.

Gray NextGenUpdate Logo