(adsbygoogle = window.adsbygoogle || []).push({}); I have a ps3 slim, with ita 4.65, after installing and activating enabler sen access have received green light and nothing happens.

does anyone know what to do?

Your HDD could be corrupted or considering your ps3 is open your rsx could not be making full contact with the heat sinks. Make sure the metal plates holding the chips in place are not touching the board. Refer to this thread to find out what exactly is wrong with your ps3. You must login or register to view this content.

Right the solutions:

To find out if it is not your RSX take out your hdd and see if the Error loading OS comes up on screen. If it does its defo your hdd to fix it just format it to fat 32 on your pc. It should resolve the issue.

If its a problem with your rsx just place 4 copper pennys (apply thermal paste on them) on the rsx chip and then and carefully allign them with the sink as your putting the board back in the metal caseing and tighten the bolt screws really tight with great pressure

ok .. I will do what you are telling me, I appreciate the help.:yes:

Its all good. But the fault is with your hdd correct as it happened after you used sen enabler. You just need to format your hdd on your pc thats all dude.

Well I started my ps3 without HD, and the same black screen and no ps3 xmb.

Try doing the penny trick or some new paste on the rsx and cell dude.

Oh yes, but you have a tutorial for this? Thanks!

the folder I'll do the penny not know what is!

Thermal paste:

:salute:

I will make friend, I'll need to buy the paste now.

Soon I post the result!

No problem dude pm me if you have anymore problems