(adsbygoogle = window.adsbygoogle || []).push({}); Ive had my ps3 for about 1 month or 2 before i jailbroke it using e3 flasher it was working fine now its overheating in like 2 mins after turning on.

I've replaced the thermal paste and tried running it without the top casing on. That kinda fixed it and now 2 days after trying with the case off it starts to overheat again.

On OFW the ps3 and fan was fine, Since jailbreaking and using rebug the fans run at full speed and overheats after 2 mins.

Ive tried using webman fan control thing and they does nothing so i disabled it.

Cell Temp starts at 76c what starting up
RSX Temp is never higher than 55c

Anything i could try and what do you thing the problem is? is it the fan or the power supply thats causing the problems

If You Did The Thermal Paste Correctly An Even..Open The Ps3 Double Check The Fan Is Plugged In Correctly... I Had This Issue Before I Unplugged The Fan Plugged It Back In An Re-installed CFW. Also Happened To One Of My Customers last Week Its Most Likely A False Over Heat

reballing?

the fan comes on and its runs at max speed until it turns itself off

Look it up it's very technical

If It Was Fine Before You Jailbroke It An The Paste Was Done Right Then Try What I Said Mine Did It Outta Know Where One Day It Was Frustrating But I Fixed It By Doing What I Said.. Thats If You Did The Paste Correctly.

to reinstall the cfw do i need to use a downgrader and then put it on 3.55 then install the cfw?

No If Your On 4.75.3 CEX Install 4.75.3 Rebug REX Via XMB/storage media.. if On DEX Use DREX.. judging By The Temp Difference Its Gotta Be A False Overheat. Worse Case Scenario The Southbridge Is Going Bad But I Doubt It

the console overheated while installing the update file :/

i managed to install the cfw again and its still the same