(adsbygoogle = window.adsbygoogle || []).push({}); So after successfully flashing my sexy ps3, and doing the whole sha-bang installing 3.55 downgrader. I got Toggle qa pkg. And when i open it . . . . Nothing happens. I left my ps3 on for about 15 minutes and still nothing. Did i screw anything up? Any Ideas? HELP [video]https://youtu.be/ET36vlBCwb0[/video]

Try this one You must login or register to view this content.

Your console should beep (once, i think) and restart.

If it doesn't work, is your disk drive functional?

My disk drive is not working. I put gta in there and the blue light did not go on and it beeps when i press the reject button. Now what? please help ;-;

_ Update _ I just opened my ps3 and unplugged and re-plugged everything back together and the blue light comes on and off

Edit: well make sure it is plugged in and everything, if it was working before it may just have a bad ribbon cable or something.. I suppose you will have to determine that, but if you are certain it is no longer functional, then

Install this downgrader You must login or register to view this content.

It is a NObd bypass firmware that allows use of apps..

Once on the downgrader, run the qa flag pkg You must login or register to view this content.

check for debug settings on the XMB, bottom of the second column from the left, press (L1,L3,R1,R2,R3 i think) and edy/debug settings should pop up

If it doesn't, try opening rebug toolbox and enable QA toggle.

Check for debug settings on the xmb, they should come up now..

Then you may be able to install either a cfw of your choice or you can/may need to find a NObd cfw.

GL! let us know how it goes.

It was a common mistake with my reassembly, thank you for all the help. So now that my disk drive is working. I launched QA Flag and it just black screened for a bit and went back to my XMB ( no beeps ).

I see.

Did it successfully QA flag then or no?

Check if the debug settings will pop up to find out. If not, there is something wrong with the bluray drive. In which case, you will need NObd cfw..

indeed everything worked fine. Thank you for all the help c: