Hello, since there seems to be some confusion I decided to start this thread for the G1, 32B port.

Note that all the work on PSFreedom was done by KaKaRoTo, and he was helped by DrMon in the MSM72K port, i merely compiled their work and put it in a simple package for everyone to enjoy.

Note also that I cannot test my G1 builds myself, as I have only a Magic 32A, so please do a Nandroid backup before testing them for the first time.

I created 2 packages, an enabler and a disabler, that you have to flash over your working CM 6.0 Final installation.
Flashing the enabler will install the modded kernel and PSFreedom module. You will lose usb functionality completely (no adb, no mass storage etc.) until you flash the disabler.
After flashing the enabler the module will always start upon boot, you have to enter no commands on the terminal emulator.

So, here are the steps to install it:
Preliminary: Make sure you are on CyanogenMod 6.0 Final and everything is working correctly. If it's the first time, do a Nandroid backup before testing!

* Download these files: You must login or register to view this content. (G1-Enabler), You must login or register to view this content. (G1-Disabler)
* Put them on your SD card
* Reboot into recovery and Flash Enable_PSFreedom_G1.zip
* Reboot


Now psfreedom should be loaded as a module, you will see no difference, except for the loss of normal usb functions.

To run the exploit:
Make sure you are on 3.41 (DO NOT UPDATE OVER THE NETWORK!)

* Connect the phone to the PS3 using usb
* Turn it off completely (unplug power cable or turn off back switch on Fat models)
* Plug it back in (turn on back switch)
* Turn it on and immediately press the eject button (you should hear 3 quick beeps)
* Booting should take a bit longer (5-10 seconds)


If you see two new options under the games tab, the exploit worked. You can now unplug the phone. Mind that you will have to do this procedure every time you boot your PS3.

To uninstall:

* Boot back into recovery
* Flash Disable_PSFreedom_G1.zip
* Reboot

You should have usb functions back to normal.

This version of PSFreedom is enabled for backups, but backup manager talk should not be done on this thread, there are other boards for that.

So basically you copy the files in the links and put them onto a memory card etc??? So does that mean you can do it with any normal USB device ???

No any USB with the phones you have to flash the files,
thats how is work.

+rep if i help

Hmmm... So would this work then with any phone with a USB connection with it.
And could you please describe what Flashing is please (Not used to all this terminology)