(adsbygoogle = window.adsbygoogle || []).push({}); I have found this about installing openiboot on IPOD TOUCH 2G. I have heard that it works but i am going to try it out and give feed back. BUT PLEASE, SOMEONE ELSE TRY IT TOO!!!! I know some of the directions are kinda confusing but i cant really help you with it because i didnt make this...so, here you go!!!!

WILL BE UPDATING THIS AS I GO ALONG

Heres a guide to installing Jaywalker's OpeniBoot for iPod Touch 2g. This program is still Alpha so dont expect to much. I also prefer that you have backed up your iPod Touch and have nothing you wouldnt mind losing on it (A.K.A you might have to restore if you mess up or something) Ok so lets start.

MUST HAVE IPOD IN RECOVERY MODE!


Requirements:
-A Jailbroken iPod Touch 2g (has to be with redsn0w or pwnagetool)
-Linux Ubuntu (prefereblly 10.04 LTS 32-bit)
-Willingness to restore your iPod
-A PC
-An iPod USB Cable

Preparation:
Install all the tools needed:
Code:

    sudo apt-get install libusb-1.0-0 libusb-1.0-0-dev libreadline6-dev readline-common libreadline6 libreadline-dev texinfo cmake git-core build-essential texinfo libreadline-dev libssl-dev libusb-1.0-0-dev libpng12-dev libusb-dev autoconf automake libnewlib-dev

Log in as root:
Code:
sudo -s
Then enter in your computer password


Mounting, Compiling, and Installing

1. First we want to mount the git repository.

    

git clone git://github.com/kleemajo/iphonelinux.git

1a. Then mount the directory

    cd iphonelinux/

2. Build the toolchain
2a.
Code:

    sudo toolchain/build-toolchain.sh make

2b. Enter in your password to log into root and wait a while for the toolchain to compile
2c. If your having problems with building newlib then try this:
Code:

    sudo rm /usr/local/bin/arm-elf-cc

3.Build
3a. Change Directory
Code:

    cd openiboot

3b.Build OpeniBoot
Code:

    PLATFORM=IPOD2G make openiboot.img3

4. Compile all in client
Code:

    cd ../tools/client/linux/

4a.
Code:

    make all

4b.
Code:

    cd

4c.
Code:

    cd iphonelinux

5.Load the client to your device
Code:

    

sudo tools/client/linux/loadibec openiboot/openiboot.img3

5a.Run the client
Code:

    sudo tools/client/linux/oibc

6. Your done!
----------------------------------------------------------------------------------
Working Commands(don't use these unless you know what your doing (of course for more info on each command just enter in help)):
reboot
help
poweroff
echo
md
mw
mwb
mws
hexdump
cat
gpio_pinstate
gpio_out
accel
pmu_voltage
pmu_powersupply
pmu_nvram
malloc_stats
frequency
backlight
go
version
wdt

----------------------------------------------------------------------------------------------------------------
Updates:
Looks like kleemajo got OiB flashed to his NOR. I'm testing out right now. And if your brick your device NOBODY IS TO BE HELD RESPONSIBLE EXCEPT YOU though we would be glad to try and help you fix your device. I'll change the guide if I get the install working I just have to get wubi on my laptop again since I'm taking a small 5 hour or so trip.
-Saphiresurf

SPI and NOR fixes, I'm not sure if there done yet, but I'll figure that out sooner or later. I'm pretty sure Jaywalker isn't working on it anymore and the main developer for this project is kleemajo right now.
-Saphiresurf

USB and Accelerometer works now
-Saphiresurf

And with that, I'm going to call it a night. Sorry It's not 100% done, but i'll finish that up first thing tomorr...zzzzz.....
By Jaywalker(998 via Twitter

Anyone interested on USB working for openiboot on ipt2g tonight? I'm about to pass out, but if i hear voices screaming out, i'll finish it
By Jaywalker(998 via twitter

"Added a few files that I forgot to in the last commit"
You must login or register to view this content.
You must login or register to view this content.
By kleemajo via Github


"Updated power_setup for IPOD2G".
You must login or register to view this content.
By kleemajo via Github
----------------------------------------------------------------------------------
(Almost) Daily builds:
9/4/10 You must login or register to view this content.

8/29/10: You must login or register to view this content.

----------------------------------------------------------------------------------
Readme (for people mostly interested in helping the project):
iPod Touch 2G Users:

Please note, this software is extremely alpha and currently only makes the device reboot from C code. This is not a bug, it's a feature.

Also, for those interested in helping out, here's a TODO for what's remaining:

* Port LCD Driver (I'll probably have to do this one.. I have some good info already)
* Verify the DMA driver works (again.. it's the same as the iphone2g)
* Port the rest - at least we'll have the basic openiboot working by this point

----------------------------------------------------------------------------------


You must login or register to view this content.


PLEASE DON NOT MOVE TO MOBILE DEVICE SECTION....WITH OPENIBOOT YOU YOU CAN PUT ON PS JAILBREAK AND THIS SHOULD STAY!!!

hey i am wondering if there is any way to jailbreak a ps3 with a ipod touch 4g i have searched and searched and searched cant find anything and reallt would hate to go buy a ipod touch 1 g thanks

does this allow you to jailbreak your ps3 with ipod touch 2g? because i thought it was only possible with ipod touch 1g

it is only possible on the iPod Touch 1G, your thoughts are right. Think about it, this link leads to PSFreedom Wiki website and clearly states, only possible on iPhone 2G, iPhone 3G, and iPod Touch 1G. I had the iPod touch 2G and i swapped with my friend who had the 1G. Just sell it and buy a secong hand 1g if you have to.

:tits::tits::tits::tits::tits::tits::tits:

---------- Post added at 01:39 PM ---------- Previous post was at 01:37 PM ----------

:pedo::pedo::pedo::pedo::pedo::pedo::pedo::pedo: