Post: Full Picture Tutorial: How to Run Backup/Pirated Games on PS3 - Requires No lv2 patch
Options
01-20-2011, 12:34 AM
#1
juddylovespizza
I'VE GOT JUNGLE FEVER
This works on all PS3s there has been no reports of any bricks whatsoever, so it is very safe unlike other methods like Waninkoko's.
This tutorial has been updated so that you no longer are required to run the lv2 "hotfix" on every boot to play backups! You can just turn on your PS3 and play
Updated again to update backup manager so there is less black screens on boot up and loading games
This tutorial is made by me, Juddy, originally for NextGenUpdate. If you copy please leave this credit.
Right now you should have an idea on what we are going to be doing lets begin shall we...
[multipage=Installing/Reinstalling 3.55 Firmware]
First you are going to ether install or reinstall 3.55 firmware onto your PS3, this is necessary to prevent any firmware problems which we do not want! If you are already on an official 3.55 update with no modifications you can skip this step. Make sure you do this though if you have already any custom firmware such as geohots etc already installed.
Download the offical 3.55 firmware from here provided by Sony:
https://dus01.ps3.update.playstation.net/update/ps3/image/us/2010_1207_ca595ad9f3af8f1491d9c9b6921a8c61/PS3UPDAT.PUP
You must login or register to view this content.You must login or register to view this content.
You will need some form of storage to put this on like a USB stick for example. In this storage make the folder "PS3" then inside that make an "UPDATE" folder. Place the "PS3UPDAT.PUP" file in this folder.
You must login or register to view this content.
Connect this storage to your PS3 and go to "System Update" then select "Update via Storage Media" and go through like normal with the update.
You must login or register to view this content.
Again if you get an error telling you that "No acclicable data was found" then you need to enter the PS3's recovery menu. You can do this by following the steps below:
- Turn off your PS3
- Hold the power button down till the console turns on and off
- Press the power button again untill you hear two beeps
- Stop pressing the power button
- You will be asked to connect your controller and press the PS button, do this
- You should now be in the recovery menu
Now scroll to "System Update" at the bottom and install the firmware like normal from there.
[multipage=Installing Custom Firmware]
This step would normaly be fairly complex but I have uploaded my own made custom firmware to make it simpler for you.
Download this custom firmware archive from here:
PROTECTED LINK:
https://lix.in/-8edcc5
You must login or register to view this content.Once downloaded extract the archive and go inside the "Patched Firmware" folder and place the "PS3" folder on your storage and make sure you overwrite the files from the previous step. Ignore the other files they are not needed.
You must login or register to view this content.
Connect this storage to your PS3 and go to "System Update" then select "Update via Storage Media" and go through like normal with the update.
You must login or register to view this content.
If you get an error telling you that "No acclicable data was found" then you need to enter the PS3's recovery menu. You can do this by following the steps below:
- Turn off your PS3
- Hold the power button down till the console turns on and off
- Press the power button again untill you hear two beeps
- Stop pressing the power button
- You will be asked to connect your controller and press the PS button, do this
- You should now be in the recovery menu
Now scroll to "System Update" at the bottom and install the firmware like normal from there.
You must login or register to view this content.
On restart you should see two new options in the "Game" section, these should be "/app/home/PS3_Game/" and "Install Package Files" if you do you have successfully installed custom firmware on your PS3.
[multipage=Installing and Using Backup Manager]
Last step now, you will install and use a backup manager called "multiMAN" on your PS3. This is the program used to run the backups themselves off of the PS3.
Download multiMAN from here:
https://www.multiupload.com/6QSHNZ7ONW
You must login or register to view this content.Extract the pkg files from the archive and place it onto your storage. Connect it to your PS3 and scroll to the "Install Package Files" it will come up and select it to install.
You must login or register to view this content.
Now go back to the "Game" section and you will see "multiMAN". Run it and it will then load up, if it crashes do not worry this is normal on the first run of the program. Just turn your PS3 off and on and load it again.
You must login or register to view this content.
Agree to all the terms and conditions. Now here you will see what game you have currently in your PS3 (if any). To copy the game to your internal HD press "O" and select "Yes". The game will then copy it onto your HD, this can take a while so be patience.
You must login or register to view this content.
Once it has finished load the game in the manager by pressing "X" on it. Press "No" on the option that comes up. This will return you back to the XMB, just scroll to where you would usually load a game from (the blue disc) and load it. Please note that you are required at the moment to have any game already in the drive to "trick" the your PS3 into loading the game.
You must login or register to view this content.
If the game fails to load and you get a blackscreen there is a way to fix this. Load up multiMAN and hover over the game that did not work. Press R1 this will patch the file permissions of the game and hopefully make it work for you.
How to use downloaded games and run them on your PS3.
FTP:
Send game over to PS3 via FTP location hdd0/games/
External H
Put game folder in root of hard drive.
More indepth soon.
The following 171 users say thank you to juddylovespizza for this useful post:
-{OVOXO}-, Şo∏Ψ ₩ʜI₮℮, JordanCarr, +Sfx Krush, 1035AMC, 420, 890popbox, Adam West, adam-the-pwner, AgentKing-Botz, agtiger, Akii-786, AlmightyRyan, andrewman18, ant599, Asmel, Aspire., baluba777, Blade X, Bog__, Bomb789, BOOMSHAKALAKA, KyleWTF, Brentdevent, Bryce24796, Call-Me-Master, CapoJoel, Car Lover, chris2595, chrisfaulk, Chrome, cmms07, CODFTW, cousindan1, Cpt.S, crosby_jeter12, cryzer, Curt, D3SI, daddar, darkesthour, Darkmykal, DaveedDB, deeh, Dexgod, divybc, Drake, DReal253, Drug Dealer, Durk, eekndot, EZ., FAKA_ELITE, FourzerotwoFAILS, Frank1721, galacticboy2009, GetDeleted -_-, gokugamer, Gold Star, GsNrg, Hacheoy, HtD, ii-ownaged-iixx, imsokool, InSaNe-xPWEEx, IPopUrDome, iRapidScope, The Epic, ItsBarryBurton, J.V., Jakob, Jaytech, joejn27, Jorgos Nomikos, JTAGXENON, kart0on15, kmax102, lahure1, Lamputt, LGxDEVIL, LIL_SMOKEY412, lil_stewie, LilP, Lito, luceathome, Manxlad619, marenight322, marine227t, MARY JANE, MasterBaitor, maxrox, mEdiivalXvirrus, Mezzid, moijesuis007, mordekaiz, morgan8088, MP_MAFIA, Mr. Star, Mr.MoldyOrange, MrJC and 71 other users.
01-21-2011, 04:52 AM
#120
darkesthour
Little One
I tried mw2 in which i got a black screen. I tried a downloaded version of the 1st modern warfare transferred it vier ftp to the folder in which it just black screens and freezes. Trying Black Ops now will post results. This was with direct boot. When ever i tried disk less pressing X it doesn't show up on xmb like on the pics.
Edit: These are being tried all without disk.
Edit 2: Black Ops has the same problem.
Edit 3:I think i found the problem. If you have a game in the disk drive doesn't have to be the copied game it works. Just don't enable the without disk option. This works for blackops going to test with mw1. Will try mw2 when i reback it up. Black ops does work online aswell! (Time to ebay my copy of gay ops.)
Edit 4: Doesn't Work with mw1 just black screens after it tries to load. Just going to test once i updated to latest patch.
Edit 5: I'm going to test metal gear solid 4 call of duty W@W next will post results here for the thread your making Juddy
Edit 6: Adding GTA eu version to my test list.
Edit 8: GTA4 eu works with me.
Edit: These are being tried all without disk.
Edit 2: Black Ops has the same problem.
Edit 3:I think i found the problem. If you have a game in the disk drive doesn't have to be the copied game it works. Just don't enable the without disk option. This works for blackops going to test with mw1. Will try mw2 when i reback it up. Black ops does work online aswell! (Time to ebay my copy of gay ops.)
Edit 4: Doesn't Work with mw1 just black screens after it tries to load. Just going to test once i updated to latest patch.
Edit 5: I'm going to test metal gear solid 4 call of duty W@W next will post results here for the thread your making Juddy
Edit 6: Adding GTA eu version to my test list.
Edit 8: GTA4 eu works with me.
01-21-2011, 05:27 AM
#122
darkesthour
Little One
01-21-2011, 05:29 AM
#123
JordanCarr
Glasgow Rangers FC
01-21-2011, 05:33 AM
#124
darkesthour
Little One
01-21-2011, 05:37 AM
#125
Omniplasma
Rookie
Originally posted by Juddy
With this tutorial you with learn how to first set-up your PS3 console so its ready to install custom firmware, then you will install the custom firmware itself. Next you will install a file on your PS3, this will be the program that you run to load the backup/pirated games!
This works on all PS3s there has been no reports of any bricks whatsoever, so it is very safe unlike other methods like Waninkoko's.
This tutorial has been updated so that you no longer are required to run the lv2 "hotfix" on every boot to play backups! You can just turn on your PS3 and play
Right now you should have an idea on what we are going to be doing lets begin shall we...
[multipage=Installing/Reinstalling 3.55 Firmware]
First you are going to ether install or reinstall 3.55 firmware onto your PS3, this is necessary to prevent any firmware problems which we do not want!
Download the offical 3.55 firmware from here provided by Sony:
You must login or register to view this content.
You will need some form of storage to put this on like a USB stick for example. In this storage make the folder "PS3" then inside that make an "UPDATE" folder. Place the "PS3UPDAT.PUP" file in this folder.
You must login or register to view this content.
Connect this storage to your PS3 and go to "System Update" then select "Update via Storage Media" and go through like normal with the update.
You must login or register to view this content.
Again if you get an error telling you that "No acclicable data was found" then you need to enter the PS3's recovery menu. You can do this by following the steps below:
Now scroll to "System Update" at the bottom and install the firmware like normal from there.
[multipage=Installing Custom Firmware]
This step would normaly be fairly complex but I have uploaded my own made custom firmware to make it simpler for you.
Download this custom firmware archive from here:
Once downloaded extract the archive and place the "UPDATE" folder in the "PS3" folder on your storage and make sure you overwrite the other "UPDATE" folder from the previous step!
You must login or register to view this content.
Connect this storage to your PS3 and go to "System Update" then select "Update via Storage Media" and go through like normal with the update.
You must login or register to view this content.
If you get an error telling you that "No acclicable data was found" then you need to enter the PS3's recovery menu. You can do this by following the steps below:
Now scroll to "System Update" at the bottom and install the firmware like normal from there.
You must login or register to view this content.
On restart you should see two new options in the "Game" section, these should be "/app/home/PS3_Game/" and "Install Package Files" if you do you have successfully installed custom firmware on your PS3.
[multipage=Installing and Using Backup Manager]
Last step now, you will install and use a backup manager called "Gaia Manager" on your PS3. This is the program used to run the backups themselves off of the PS3.
Download Gaia Manager from here:
Extract the one of the pkg files from the archive and place it onto your storage. Connect it to your PS3 and scroll to the "Install Package Files" it will come up and select it to install.
You must login or register to view this content.
Now go back to the "Game" section and you will see "Gaia Manager".
You must login or register to view this content.
Run it and it will then load up. Here you will see what game you have currently in your PS3 (if any). To copy the game to your internal HD press "O" and select "Yes". The game will then copy it onto your HD, this can take a while so be patience. It will take about 30 minutes to complete depending on the size of your game.
You must login or register to view this content.
Once it has finished load the game in the manager by pressing "X" on it. This will return you back to the XMB, just scroll to where you would usually load a game from (the blue disc) and load it. Enjoy and remember to return your rented games back to blockbuster asap!
To add: How to use downloaded games and run them on your PS3.
This works on all PS3s there has been no reports of any bricks whatsoever, so it is very safe unlike other methods like Waninkoko's.
This tutorial has been updated so that you no longer are required to run the lv2 "hotfix" on every boot to play backups! You can just turn on your PS3 and play
Right now you should have an idea on what we are going to be doing lets begin shall we...
[multipage=Installing/Reinstalling 3.55 Firmware]
First you are going to ether install or reinstall 3.55 firmware onto your PS3, this is necessary to prevent any firmware problems which we do not want!
Download the offical 3.55 firmware from here provided by Sony:
https://dus01.ps3.update.playstation.net/update/ps3/image/us/2010_1207_ca595ad9f3af8f1491d9c9b6921a8c61/PS3UPDAT.PUP
You must login or register to view this content.You must login or register to view this content.
You will need some form of storage to put this on like a USB stick for example. In this storage make the folder "PS3" then inside that make an "UPDATE" folder. Place the "PS3UPDAT.PUP" file in this folder.
You must login or register to view this content.
Connect this storage to your PS3 and go to "System Update" then select "Update via Storage Media" and go through like normal with the update.
You must login or register to view this content.
Again if you get an error telling you that "No acclicable data was found" then you need to enter the PS3's recovery menu. You can do this by following the steps below:
- Turn off your PS3
- Hold the power button down till the console turns on and off
- Press the power button again untill you hear two beeps
- Stop pressing the power button
- You will be asked to connect your controller and press the PS button, do this
- You should now be in the recovery menu
Now scroll to "System Update" at the bottom and install the firmware like normal from there.
[multipage=Installing Custom Firmware]
This step would normaly be fairly complex but I have uploaded my own made custom firmware to make it simpler for you.
Download this custom firmware archive from here:
https://www.multiupload.com/YELRX9JWT7
You must login or register to view this content.Once downloaded extract the archive and place the "UPDATE" folder in the "PS3" folder on your storage and make sure you overwrite the other "UPDATE" folder from the previous step!
You must login or register to view this content.
Connect this storage to your PS3 and go to "System Update" then select "Update via Storage Media" and go through like normal with the update.
You must login or register to view this content.
If you get an error telling you that "No acclicable data was found" then you need to enter the PS3's recovery menu. You can do this by following the steps below:
- Turn off your PS3
- Hold the power button down till the console turns on and off
- Press the power button again untill you hear two beeps
- Stop pressing the power button
- You will be asked to connect your controller and press the PS button, do this
- You should now be in the recovery menu
Now scroll to "System Update" at the bottom and install the firmware like normal from there.
You must login or register to view this content.
On restart you should see two new options in the "Game" section, these should be "/app/home/PS3_Game/" and "Install Package Files" if you do you have successfully installed custom firmware on your PS3.
[multipage=Installing and Using Backup Manager]
Last step now, you will install and use a backup manager called "Gaia Manager" on your PS3. This is the program used to run the backups themselves off of the PS3.
Download Gaia Manager from here:
https://www.multiupload.com/MK8W5ILVXO
You must login or register to view this content.Extract the one of the pkg files from the archive and place it onto your storage. Connect it to your PS3 and scroll to the "Install Package Files" it will come up and select it to install.
You must login or register to view this content.
Now go back to the "Game" section and you will see "Gaia Manager".
You must login or register to view this content.
Run it and it will then load up. Here you will see what game you have currently in your PS3 (if any). To copy the game to your internal HD press "O" and select "Yes". The game will then copy it onto your HD, this can take a while so be patience. It will take about 30 minutes to complete depending on the size of your game.
You must login or register to view this content.
Once it has finished load the game in the manager by pressing "X" on it. This will return you back to the XMB, just scroll to where you would usually load a game from (the blue disc) and load it. Enjoy and remember to return your rented games back to blockbuster asap!
To add: How to use downloaded games and run them on your PS3.
When I install and run the pkg it takes me back to xmb?
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
