Post: [PICTURE TUTORIAL]Connecting to PSN on CFW 3.55 Kmeaw (FULL GUIDE)
Options
02-13-2011, 06:14 AM
#1
GinoBeatz
I rz Z 1337 h4x0r$
Please read this guide slowly and carefully.
Bypassing PS3 PSN checks (guide by Tsukasa035):
Things you need:
- VMware Player with Ubuntu Desktop version installed (or a separate PC)
*Ubuntu Server Version can also be used if you know how to work your way around Linux
- Charles Web Debugging Proxy
Installing the certificate on your PS3
1) Go to: C:\Program Files\Charles\docs
2) Copy charles-proxy-ssl-proxying-certificate.crt somewhere and rename to CA24.cer
3) Using AsbestOS Installer or mount_alejandro, put this file and overwrite the existing in dev_flash/data/cert
Installing and setting up dnsmasq
In your Ubuntu VMWare box:
Change your VMware network settings from NAT to Bridged:
You must login or register to view this content.
(The following commands in Terminal can also be pasted instead of typing!)
1) Reboot your Ubuntu box.
2) Start Terminal (Applications -> Accessories -> Terminal)
3) type: sudo apt-get install dnsmasq
4) type: sudo gedit /etc/hosts
4.1) Add the following 2 lines:
192.168.1.XXX feu01.ps3.update.playstation.net
192.168.1.XXX auth.np.ac.playstation.net
*NOTE: 192.168.1.XXX needs to point to the computer where Charles is running!
Replace eu with the region you're in! {eu, uk, us, mx, au etc...}
You must login or register to view this content.
4.2) Save the file and exit the text editor
5) type: ifconfig
You must login or register to view this content.
Make note of the following line: inet addr:192.168.1.XXX <-- This is depends on your install. This IP is what you will enter in your PS3 as DNS Server.
6) type: ps -ef|grep dnsmasq to confirm dnsmasq is running.
You must login or register to view this content.
From your Windows (host) PC, type ping [IP YOU GOT FROM ifconfig] and make sure you can see it. This concludes the Ubuntu part.
Installing and setting up Charles
Assuming you have installed Charles:
1) Save the following block of text as ps3-updatelist.txt somewhere you can easily access:
Dest=83;CompatibleSystemSoftwareVersion=3.2100-;
Dest=83;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=84;CompatibleSystemSoftwareVersion=3.2100-;
Dest=84;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=85;CompatibleSystemSoftwareVersion=3.2100-;
Dest=85;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=86;CompatibleSystemSoftwareVersion=3.2100-;
Dest=86;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=87;CompatibleSystemSoftwareVersion=3.2100-;
Dest=87;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=88;CompatibleSystemSoftwareVersion=3.2100-;
Dest=88;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=89;CompatibleSystemSoftwareVersion=3.2100-;
Dest=89;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=8A;CompatibleSystemSoftwareVersion=3.2100-;
Dest=8A;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=8B;CompatibleSystemSoftwareVersion=3.2100-;
Dest=8B;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=8C;CompatibleSystemSoftwareVersion=3.2100-;
Dest=8C;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=8D;CompatibleSystemSoftwareVersion=3.2100-;
Dest=8D;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;2) In Charles: Tools -> Map Local. | Check the box and click Add
2.1)
(REPLACE eu to whatever region you're in! {eu, uk, us, mx, au...etc etc}
You must login or register to view this content.
Click OK.
Should look like this:
You must login or register to view this content.
3) In Charles: Tools -> Rewrite | Check Enable Rewrite and click Add
3.1) Name: Version header replace
3.2)Under Locations click Add
You must login or register to view this content.
3.3) Under Rules click Add and use the following settings:
You must login or register to view this content.
Should look like this:
You must login or register to view this content.
4) Proxy -> Reverse proxies | Check Enable Reverse Proxies and click Add
4.1) Add the following two entries. MAKE SURE NOT TO ADD https:// to the auth.np.ac.playstation.net ENTRY!!
(Again, replace eu with the region you're in! {eu, uk, us, mx, au etc...})
You must login or register to view this content.
Should look like this:
You must login or register to view this content.
Make sure you have no webserver or anything running that uses Port 80!! People say Skype may also use this port!
OPTIONAL 5) Proxy -> Windows Proxy Uncheck it so you only receive entries from your PS3 and not the PC you're on.
6) Proxy -> Proxy Settings <-- Note down the HTTP Port Charles is using
This concludes the Charles Web Debugging Proxy setup.
On your PS3, use the following network settings
DNS Server: {IP of virtual machine where dnsmasq is installed}
Proxy Server: {IP where Charles is running}
Proxy port: {Port of Charles you noted earlier}
Now, go and test your connection. If everything is configured properly then you should see some entries in the Charles window and be greeted with the following:
You must login or register to view this content.
Rejoice! :dance:
Credits to: Person who came up with this method, Yuki and anyone else who actually helped instead of whining.
If if I missed anything, sue me. It's 6am now.
The following 87 users say thank you to GinoBeatz for this useful post:
-Google-, |ManiaC|, 890popbox, Asmel, AtlasK, Azure_Hack, balerdoni, BigMel1, BOBROSSISALIVE, Bomber1614ModZ, BooshMayne, brookboy98, Carbon0x, Classy., cluckin bell, D3V, david9602, DEREKTROTTER, Desert54, Dreamcather, DRFT-ii_JOKER, drive4567, effinTyler, firefox7, forumjunkie, Francyepaddy, Grandad Trotter, HOST Lee, I Got Cookies, i--DanieL_, Hawk, IDontbreak, iiSuPerBaD, ILovePie24!!, Insane4gamesman, irish-sid, itsjr516, IzBoogz, J.V., jackrtk, jannu22, Jaytech, JJHarris4, joejn27, JTidler, Jude_x_Y, L☺L, legitmod, Lick, lobbyhax, Lydey, maradragon, MasonF123, mEdiivalXvirrus, moijesuis007, Monster-Energy, mordekaiz, Mr. Star, Mr.Houston, MrBelfast, mujuulei, NanuGama, Nickm0117, player82, RaverBoy, remi06, ResistElite,, rob_lowrider, rversed, shaneod, SLY2010, Solid Snake, Superchunk, SuperHigh202, TheGuyWhoHakz, ThereThatGuy, TheSouthpaw, TMAN242, tsuma, xBHR, xBlackness, xCRaZySkiLLZ-, xDowwdeen, xELiT3_Sn1PaXx, xRafiq-, Zombie
02-13-2011, 05:11 PM
#194
hammy876
Can’t trickshot me!
Originally posted by mujah2009
Thank you all i love u all u saved my life im online now and it all back to u thx:p
:pedo:
:pedo:
how did you fix it??
---------- Post added at 01:11 PM ---------- Previous post was at 01:10 PM ----------
Originally posted by zxz0O0
Thats ok. Did you do the steps I posted? It should work then.
k trying it now
02-13-2011, 05:14 PM
#196
firefox7
XBOX 360 SUCKS
Originally posted by GinoBeatz
Please get this on the first page!
Please read this guide slowly and carefully.
Bypassing PS3 PSN checks (guide by Tsukasa035):
Things you need:
Installing the certificate on your PS3
1) Go to: C:\Program Files\Charles\docs
2) Copy charles-proxy-ssl-proxying-certificate.crt somewhere and rename to CA24.cer
3) Using AsbestOS Installer or mount_alejandro, put this file and overwrite the existing in dev_flash/data/cert
Installing and setting up dnsmasq
In your Ubuntu VMWare box:
Change your VMware network settings from NAT to Bridged:
You must login or register to view this content.
(The following commands in Terminal can also be pasted instead of typing!)
1) Reboot your Ubuntu box.
2) Start Terminal (Applications -> Accessories -> Terminal)
3) type: sudo apt-get install dnsmasq
4) type: sudo gedit /etc/hosts
4.1) Add the following 2 lines:
192.168.1.XXX feu01.ps3.update.playstation.net
192.168.1.XXX auth.np.ac.playstation.net
*NOTE: 192.168.1.XXX needs to point to the computer where Charles is running!
Replace eu with the region you're in! {eu, uk, us, mx, au etc...}
You must login or register to view this content.
4.2) Save the file and exit the text editor
5) type: ifconfig
You must login or register to view this content.
Make note of the following line: inet addr:192.168.1.XXX <-- This is depends on your install. This IP is what you will enter in your PS3 as DNS Server.
6) type: ps -ef|grep dnsmasq to confirm dnsmasq is running.
You must login or register to view this content.
From your Windows (host) PC, type ping [IP YOU GOT FROM ifconfig] and make sure you can see it. This concludes the Ubuntu part.
Installing and setting up Charles
Assuming you have installed Charles:
1) Save the following block of text as ps3-updatelist.txt somewhere you can easily access:
2) In Charles: Tools -> Map Local. | Check the box and click Add
2.1)
(REPLACE eu to whatever region you're in! {eu, uk, us, mx, au...etc etc}
You must login or register to view this content.
Click OK.
Should look like this:
You must login or register to view this content.
3) In Charles: Tools -> Rewrite | Check Enable Rewrite and click Add
3.1) Name: Version header replace
3.2)Under Locations click Add
You must login or register to view this content.
3.3) Under Rules click Add and use the following settings:
You must login or register to view this content.
Should look like this:
You must login or register to view this content.
4) Proxy -> Reverse proxies | Check Enable Reverse Proxies and click Add
4.1) Add the following two entries. MAKE SURE NOT TO ADD https:// to the auth.np.ac.playstation.net ENTRY!!
(Again, replace eu with the region you're in! {eu, uk, us, mx, au etc...})
You must login or register to view this content.
Should look like this:
You must login or register to view this content.
Make sure you have no webserver or anything running that uses Port 80!! People say Skype may also use this port!
OPTIONAL 5) Proxy -> Windows Proxy Uncheck it so you only receive entries from your PS3 and not the PC you're on.
6) Proxy -> Proxy Settings <-- Note down the HTTP Port Charles is using
This concludes the Charles Web Debugging Proxy setup.
On your PS3, use the following network settings
DNS Server: {IP of virtual machine where dnsmasq is installed}
Proxy Server: {IP where Charles is running}
Proxy port: {Port of Charles you noted earlier}
Now, go and test your connection. If everything is configured properly then you should see some entries in the Charles window and be greeted with the following:
You must login or register to view this content.
Rejoice! :dance:
Credits to: Person who came up with this method, Yuki and anyone else who actually helped instead of whining.
If if I missed anything, sue me. It's 6am now.
Please read this guide slowly and carefully.
Bypassing PS3 PSN checks (guide by Tsukasa035):
Things you need:
- VMware Player with Ubuntu Desktop version installed (or a separate PC)
*Ubuntu Server Version can also be used if you know how to work your way around Linux
- Charles Web Debugging Proxy
Installing the certificate on your PS3
1) Go to: C:\Program Files\Charles\docs
2) Copy charles-proxy-ssl-proxying-certificate.crt somewhere and rename to CA24.cer
3) Using AsbestOS Installer or mount_alejandro, put this file and overwrite the existing in dev_flash/data/cert
Installing and setting up dnsmasq
In your Ubuntu VMWare box:
Change your VMware network settings from NAT to Bridged:
You must login or register to view this content.
(The following commands in Terminal can also be pasted instead of typing!)
1) Reboot your Ubuntu box.
2) Start Terminal (Applications -> Accessories -> Terminal)
3) type: sudo apt-get install dnsmasq
4) type: sudo gedit /etc/hosts
4.1) Add the following 2 lines:
192.168.1.XXX feu01.ps3.update.playstation.net
192.168.1.XXX auth.np.ac.playstation.net
*NOTE: 192.168.1.XXX needs to point to the computer where Charles is running!
Replace eu with the region you're in! {eu, uk, us, mx, au etc...}
You must login or register to view this content.
4.2) Save the file and exit the text editor
5) type: ifconfig
You must login or register to view this content.
Make note of the following line: inet addr:192.168.1.XXX <-- This is depends on your install. This IP is what you will enter in your PS3 as DNS Server.
6) type: ps -ef|grep dnsmasq to confirm dnsmasq is running.
You must login or register to view this content.
From your Windows (host) PC, type ping [IP YOU GOT FROM ifconfig] and make sure you can see it. This concludes the Ubuntu part.
Installing and setting up Charles
Assuming you have installed Charles:
1) Save the following block of text as ps3-updatelist.txt somewhere you can easily access:
Dest=83;CompatibleSystemSoftwareVersion=3.2100-;
Dest=83;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=84;CompatibleSystemSoftwareVersion=3.2100-;
Dest=84;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=85;CompatibleSystemSoftwareVersion=3.2100-;
Dest=85;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=86;CompatibleSystemSoftwareVersion=3.2100-;
Dest=86;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=87;CompatibleSystemSoftwareVersion=3.2100-;
Dest=87;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=88;CompatibleSystemSoftwareVersion=3.2100-;
Dest=88;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=89;CompatibleSystemSoftwareVersion=3.2100-;
Dest=89;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=8A;CompatibleSystemSoftwareVersion=3.2100-;
Dest=8A;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=8B;CompatibleSystemSoftwareVersion=3.2100-;
Dest=8B;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=8C;CompatibleSystemSoftwareVersion=3.2100-;
Dest=8C;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;
Dest=8D;CompatibleSystemSoftwareVersion=3.2100-;
Dest=8D;ImageVersion=00000000;SystemSoftwareVersion=3.2100;CDN=https://lolz.com;CDN_Timeout=30;2) In Charles: Tools -> Map Local. | Check the box and click Add
2.1)
(REPLACE eu to whatever region you're in! {eu, uk, us, mx, au...etc etc}
You must login or register to view this content.
Click OK.
Should look like this:
You must login or register to view this content.
3) In Charles: Tools -> Rewrite | Check Enable Rewrite and click Add
3.1) Name: Version header replace
3.2)Under Locations click Add
You must login or register to view this content.
3.3) Under Rules click Add and use the following settings:
You must login or register to view this content.
Should look like this:
You must login or register to view this content.
4) Proxy -> Reverse proxies | Check Enable Reverse Proxies and click Add
4.1) Add the following two entries. MAKE SURE NOT TO ADD https:// to the auth.np.ac.playstation.net ENTRY!!
(Again, replace eu with the region you're in! {eu, uk, us, mx, au etc...})
You must login or register to view this content.
Should look like this:
You must login or register to view this content.
Make sure you have no webserver or anything running that uses Port 80!! People say Skype may also use this port!
OPTIONAL 5) Proxy -> Windows Proxy Uncheck it so you only receive entries from your PS3 and not the PC you're on.
6) Proxy -> Proxy Settings <-- Note down the HTTP Port Charles is using
This concludes the Charles Web Debugging Proxy setup.
On your PS3, use the following network settings
DNS Server: {IP of virtual machine where dnsmasq is installed}
Proxy Server: {IP where Charles is running}
Proxy port: {Port of Charles you noted earlier}
Now, go and test your connection. If everything is configured properly then you should see some entries in the Charles window and be greeted with the following:
You must login or register to view this content.
Rejoice! :dance:
Credits to: Person who came up with this method, Yuki and anyone else who actually helped instead of whining.
If if I missed anything, sue me. It's 6am now.
i got an error trying to put in the reverse proxy port 443
it says adress alreaDy in use
02-13-2011, 05:17 PM
#197
hammy876
Can’t trickshot me!
Originally posted by mujah2009
i got it solved by restarting the charles proxy and the ps3 and the ubuntu all and start them by this order
start the VM "Ubuntu" first
and then start the charles proxy
and then start ps3 and boom u got psn
sorry for bad English + misspelling
start the VM "Ubuntu" first
and then start the charles proxy
and then start ps3 and boom u got psn
sorry for bad English + misspelling
damn didnt work
---------- Post added at 01:17 PM ---------- Previous post was at 01:16 PM ----------
Originally posted by firefox7
i got an error trying to put in the reverse proxy port 443
it says adress alreaDy in use
it says adress alreaDy in use
clse any program your not using like skype and all that
02-13-2011, 05:18 PM
#199
hammy876
Can’t trickshot me!
Originally posted by zxz0O0
Thats ok. Did you do the steps I posted? It should work then.
i did all the steps still no luck oh i know what the problem is look,
Host You must login or register to view this content.
Path /
Notes SSL Proxying not enabled for this host: enable in Proxy Settings, SSL locations
Requests 4
Completed 0
Incomplete 4
Failed 0
Timing
Start 2/13/11 11:15:40 AM
End 2/13/11 11:15:58 AM
Duration 17.60 sec
Requests / sec 0.00
Durations 0 ms
Latency 0 ms
Speed -
Request Speed -
Response Speed -
Size
Requests 3.84 KB
Responses 9.95 KB
Combined 13.79 KB
Compression -
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
