Post: F*ck PSN 0.5 w/ older firmware support released
02-16-2011, 04:37 PM #1
moiz41510
Vault dweller
(adsbygoogle = window.adsbygoogle || []).push({});
You must login or register to view this content.

****Psn 0.5 by [email][email protected][/email]

[ame]https://www.youtube.com/watch?v=9DlG1SmlwsU[/ame]

Prerequisites
CA27.cer, dev_blind.pkg, ****Psn-v0.5.exe from You must login or register to view this content.
OpenPS3FTP v1.3 from You must login or register to view this content. since 1.2 has some problems

ChangeLog
v0.5: Add support for firmwares older than 3.55
v0.4: Don’t use PS3DNS anymore

Installation
Install dev_blind.pkg and OpenPS3FTP on your PS3 (using FTP, external USB or what else)
Launch dev_blind and make it mount the flash
Open OpenPS3FTP and connect to it using a PC
Connect via FTP to PS3 (using username root and password openbox)
Go to /dev_blind/data/cert
Rename CA27.cer to CA27.cer.bak
Put my CA27.cer as /dev_blind/data/cert/CA27.cer
Set the PS3’s PRIMARY and SECONDARY DNS server to your PC’s IP address
Reboot your PS3
Start ****Psn-v0.5.exe
Enjoy with PSN

Warnings
If you have followed the OLD guide you need to rename the original CA27.cer to CA27.cer.bak and (my) CA24.cer to CA27.cer and you have to restore the old CA24.cer, by renaming CA24.cer.bak to CA24.cer

FAQs
Q: ****PSN does not start or prints “Address already in use” as error
A: Close anything that is using port 80 or 443, try also to close skype and to disable ICS if you are using it.

Donate
If you like my work please, You must login or register to view this content.

Using under Linux
Download You must login or register to view this content.
Install rubydns gem with gem install rubydns
Launch ****Psn: sudo ./****Psn.rb
Enjoy
DEVELOPERS SECTION
Build EXE (Windows only)

Install You must login or register to view this content.
Install required gems by opening the “Ruby Command Line” and typing gem install ocra rubydns
Launch: ocra ****Psn.rb data\*
You will have ****Psn.exe file

Credit: DrizzT from You must login or register to view this content. C&P
(adsbygoogle = window.adsbygoogle || []).push({});

The following 9 users say thank you to moiz41510 for this useful post:

chrisdocherty91, drive4567, Eggy551, nike_sb, Sambrears, shaneod, Waackoo, worstMW2player, XxAKASHIxX
02-18-2011, 09:03 PM #65
moiz41510
Vault dweller
Originally posted by ps3mass View Post
Still the program is working fine....seems as though my ip changes diff. days but haven't had a problem at all. I just go and change the ip and it's good to go.


if only all these other people knew how to do that, lol
02-18-2011, 09:39 PM #66
ps3mass
BlueBerryBreeze
Yes most think there on some type of cfw that came with the system from the store and magically everything should be at their finger tips...

---------- Post added at 04:37 PM ---------- Previous post was at 04:36 PM ----------

And actually I think this is a decent program just for the fact that the ip does change....but their again i'm not that technical....seem pretty low key unless your out blasting cl's all day and getting reported

---------- Post added at 04:39 PM ---------- Previous post was at 04:37 PM ----------

I do have a question for ya:: are you pretty familiar with the data transfer....I get the jist but their is something I want to do...(I know it can be done)...I just can't seem to find the right answer
02-19-2011, 07:02 AM #67
Originally posted by ps3mass View Post
Yes most think there on some type of cfw that came with the system from the store and magically everything should be at their finger tips...

---------- Post added at 04:37 PM ---------- Previous post was at 04:36 PM ----------

And actually I think this is a decent program just for the fact that the ip does change....but their again i'm not that technical....seem pretty low key unless your out blasting cl's all day and getting reported

---------- Post added at 04:39 PM ---------- Previous post was at 04:37 PM ----------

I do have a question for ya:: are you pretty familiar with the data transfer....I get the jist but their is something I want to do...(I know it can be done)...I just can't seem to find the right answer



i think this is patched now
02-19-2011, 05:24 PM #68
i just accitdenly logged in with my hacked ps3 :O


i hope $ony$ spyware didnt go of like this guy :pedo: when seeing justin bieber
02-27-2011, 10:19 PM #69
MasterBaitor
< ^ > < ^ >
Originally posted by moiz41510 View Post
You must login or register to view this content.

****Psn 0.5 by [email][email protected][/email]

You must login or register to view this content.

Prerequisites
CA27.cer, dev_blind.pkg, ****Psn-v0.5.exe from You must login or register to view this content.
OpenPS3FTP v1.3 from You must login or register to view this content. since 1.2 has some problems

ChangeLog
v0.5: Add support for firmwares older than 3.55
v0.4: Don’t use PS3DNS anymore

Installation
Install dev_blind.pkg and OpenPS3FTP on your PS3 (using FTP, external USB or what else)
Launch dev_blind and make it mount the flash
Open OpenPS3FTP and connect to it using a PC
Connect via FTP to PS3 (using username root and password openbox)
Go to /dev_blind/data/cert
Rename CA27.cer to CA27.cer.bak
Put my CA27.cer as /dev_blind/data/cert/CA27.cer
Set the PS3’s PRIMARY and SECONDARY DNS server to your PC’s IP address
Reboot your PS3
Start ****Psn-v0.5.exe
Enjoy with PSN

Warnings
If you have followed the OLD guide you need to rename the original CA27.cer to CA27.cer.bak and (my) CA24.cer to CA27.cer and you have to restore the old CA24.cer, by renaming CA24.cer.bak to CA24.cer

FAQs
Q: ****PSN does not start or prints “Address already in use” as error
A: Close anything that is using port 80 or 443, try also to close skype and to disable ICS if you are using it.

Donate
If you like my work please, You must login or register to view this content.

Using under Linux
Download You must login or register to view this content.
Install rubydns gem with gem install rubydns
Launch ****Psn: sudo ./****Psn.rb
Enjoy
DEVELOPERS SECTION
Build EXE (Windows only)

Install You must login or register to view this content.
Install required gems by opening the “Ruby Command Line” and typing gem install ocra rubydns
Launch: ocra ****Psn.rb data\*
You will have ****Psn.exe file

Credit: DrizzT from You must login or register to view this content. C&P


I like the tut but i was having problems with **** PSN :O. Can you help me?? I did everything like the video, I even rebooted when it asked me too now I click **** PSN and i get this>>>
You must login or register to view this content.
ANd it just stays there, any idea why its not working?? :n00b:

Thanks!! O and great tut again :black: ClapsClaps

Copyright © 2026, NextGenUpdate.
All Rights Reserved.

Gray NextGenUpdate Logo