yeah it happened to me to :'( use the portable version !! it worked for me. and you need to have a "ps3keys" folder in your portable mfw builder version! And a copy of "tasks" on the root of the folder that has the folder (its complicated... but try one of those)

---------- Post added at 05:33 PM ---------- Previous post was at 05:31 PM ----------



ok

The message you have entered is too short. Please lenghten your message

download the QA package and install it then do the button combo You must login or register to view this content.

---------- Post added at 07:13 PM ---------- Previous post was at 07:10 PM ----------

QA can be removed There is a package to remove it if the person doesn't want it anymore

---------- Post added at 07:17 PM ---------- Previous post was at 07:13 PM ----------

Wrong This was Made From Original ofw 3.55 from sony this is why it runs flawless

---------- Post added at 07:23 PM ---------- Previous post was at 07:17 PM ----------

people have been saying its more stable then kmeaw 3.55

---------- Post added at 07:28 PM ---------- Previous post was at 07:23 PM ----------

its more stable & in the debug settings HDCP Option SHOWS & WORKS

---------- Post added at 07:29 PM ---------- Previous post was at 07:28 PM ----------

Nope that problem is fixed in this firmware

---------- Post added at 07:33 PM ---------- Previous post was at 07:29 PM ----------

yes it was made with MFW builder but a patched one

---------- Post added at 07:35 PM ---------- Previous post was at 07:33 PM ----------

Once you have your firmware installed go here and download the following files:You must login or register to view this content.

setup_flash_for_otheros.pkg
dtbImage.ps3.bin (For 16MB NOR) or dtbImage.ps3.bin.minimal (For 256MB NAND)
install_otheros.pkg
boot_otheros.pkg
reboot.pkg
create_hdd_region.sh
hdd_access.sh

Install OtherOS on HDD (for all PS3 models)

THIS IS FROM You must login or register to view this content.

NOTICE: All my tools should beep. If you don't get beep during one of the steps below
then stop doing anything and contact me. I will help.
OtherOS++ support: irc.gitbrew.org (ssl) #otheros

ALL PS3 MODELS ARE SUPPORTED !!!

1. Install my latest CFW
2. When installation is finished, go to recovery menu and choose "Restore PS3 System"
3. Now your GameOS should use only the half of your HDD
(Currently working on a better approach)
4. Run setup_flash_for_otheros.pkg (for all PS3 models)
5. Reboot (It's important to shut down and turn on your PS3)
6. Store dtbImage.ps3.bin on USB drive, plug it in and run install_otheros.pkg
(NAND owners should use dtbImage.ps3.bin.minimal, rename it to dtbImage.ps3.bin).
Try different USB ports if you don't get any beeps.
7. Run boot_otheros.pkg
8. Run reboot.pkg
9. You should be in petitboot now.
Exit from CUI to shell or switch to another virtual console.
10. Run script create_hdd_region.sh
11. Reboot and boot petitboot again
12. You should see now new HDD device on petitboot, /dev/ps3dd.
That's your OtherOS HDD region.
Don't touch any other HDD regions if you don't know what you are doing. Use only ps3dd
device for your Linux installation. Use parted to partition it and create GPT partition
table on ps3dd. GPT is supported by both, Linux and FreeBSD.

Be warned, if you damage your GameOS HDD region, GameOS will reformat HDD and
remove your Linux HDD region in the process. You have to do the above steps again.
Don't mess with GameOS HDD region and GameOS won't mess with your OtherOS HDD region.

For users who installed OtherOS on VFLASH region 7 previously
--------------------------------------------------------------

You have to restore your VFLASH before doing the above steps.
Be warned, this step is NOT for NAND owners.

1. Install my latest petitboot
2. Boot petitboot
3. Run script restore_vflash.sh
4. Reboot. GameOS should reformat your HDD again.