[TUTORIAL] Downgrade and change BDreader [n00b friendly]

08-23-2011, 05:07 PM #1

YnO

~♣°Yamata no Orochi°♣~

1,954

Posts

34,916

Reputation

-2

Credits

Premium

Apr 2010

NextGenUpdate

(adsbygoogle = window.adsbygoogle || []).push({}); PSPmaniaco have made a tutorial in spanish,

FIRST OF ALL, BECAUSE SOME COMMENTS ON THIS THREAD THIS IS NOT A DOWNGRADE FROM 3.56 + this is a tutorial for Re-Marry a BD drive

Seeing the problems is having people make the process of changing readers donwgrade defective or fail to do this tutorial to make the process easier.
We need:
A jig Dongle (in my case a teensy 2.0).
You must login or register to view this content.

The PS3 which we will change the reader and other BD drive (currently only valid with the PS3 FAT 20, 40 and 60 GB as it is that support down to the version 2.30).

You must login or register to view this content.

The files for readers RE-MArried filtered Lv2Diag.self for the service mode (the original and modified for version 3.55) and 3.41 firmwares Spoof to 3.41 (should be in version 3.55), version 3.15 and the 2.30 (PS3UPDATE.PUP).
Spoof Version 3.41 to 3.56
You must login or register to view this content.
Version 3.15
You must login or register to view this content.
Version 2.30
You must login or register to view this content.
(Thanks to Kravenbnc and courtesy of the web DemonHades).

Finally a 512 MB flash drive (minimum) formatted in FAT or FAT32.
You must login or register to view this content.

1, we will dismantle the BD faulty console strip of data by disconnecting the power cord and the reader.
You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

2 º Connect the reader back to the console making sure that the strip of data from the reader is well connected or could crash when re-married drive (watch the locking of the connector that is very fragile so Open it and close it carefully ).
You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

3 Put the new BD drive do it carefully
You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

4 º Now With the console closed put your jig on USB port 1 of the console;
[img] [url]https://img542.imageshack.us/img542/9285/imga0962.jpg[/url] [/ img]

switch the button in rear of the console
and turn ON by pressing Power + Eject quickly (should give 2 beeps to turn on)
[Img]https://img849.imageshack.us/img849/6489/imga0960.jpg[/img]

You must login or register to view this content.

the console will turn on and see the light of the jig as USB lights (varies with the dongle)
You must login or register to view this content.

after that the PS3 should OFF in automatic

5 º'll check this in service mode by turning on the console and you should see this screen
You must login or register to view this content.

If so, turn off your console. if not do it againd XD

6 º connect and formatt a USB in FAT/FAT32
You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

7 º Once finishs
in root of your usb put the files Lv2Diag.self and firmware version 3.41 PS3UPDAT.PUP Spoof of 3.56 (the lv2diag to write the firmware must be 366 KB)
You must login or register to view this content.

and put the device into the USB port 4 if it is a 20/60 GB PS3 or port 2 if a 40 GB PS3
You must login or register to view this content.

and turn on the console with the Power button.

8 The console will light and NO video show during the recording process of the firmware (its normal), takes 5 to 7 minutes to complete the process,

the green light flashes a few seconds and the console will turn off by itself;

fter making the process the console will be in version 3.41 Spoof 3.56, repeat step 7 and go down to version 3.15 FW, repeat it again to download directly from 3.15 to 2.30 simply by changing the PS3UPDAT.PUP

9 º Once the console is in version 2.30 and still in the service mode
connect the flash drive to your PC, delete all contents and put in the files for remarry readers the PS3UPDAT.PUP version 2.30
just like this:
You must login or register to view this content.

and inside the cfg folder has to be this file

            ###############################################

    # DiagÝ’èƒtƒ@ƒCƒ‹

    # —ÊŽŽ—p

    # WLAN & BT RSSI‘ª’è

    #

    # 2006/09/06   kyoshida

    #             Eurus‚Ì—L–³ŒŸo‘Î‰ž

    # 2006/10/10   kyoshida

    #             RSSI’l‚Ì‹KŠi‚ð

    #            u’²®ŒŸ¸—v€F06.10.05v‚Ö‡‚í‚¹‚éB

    ###############################################

    #=== ‹¤’ÊÝ’è =================================

    #

    # Œv‘ªƒ‚[ƒhÝ’è

    #

    #   0 = ’Êíƒ‰ƒCƒ“ŒŸ¸

    #   1 = ƒfƒoƒbƒN Œv‘ªŒJ‚è•Ô‚µ

    #----------------------------------------------

    0

    #=== ‹¤’ÊÝ’è =================================

    #

    # RSSI‚ª‹KŠi“à‚Ìê‡‚ÉAshutdown‚ðŽÀs‚·‚é‚©H‚ÌÝ’è

    #

    #   0 = shutdown ‚µ‚È‚¢B

    #   1 = shutdown ‚·‚éB

    #----------------------------------------------

    1

    #=== ‹¤’ÊÝ’è =================================

    #

    # ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦

    #

    # RSSI‚ª‹KŠi“à(-OK-)‚Ìê‡‚És‚¤LED§Œä

    #

    # LED ID

    #

    #   1 = POWER(green)

    #   2 = STATUS(red)

    #

    # LED ACTION

    #

    #   0 = OFF

    #   1 = ON

    #   2 = BLINK FAST

    #   3 = BLINK SLOW

    #----------------------------------------------

    #<1>------

    # LED ID

    1

    # LED ACTION

    1

    #<2>------

    # LED ID

    2

    # LED ACTION

    0

    #=== ‹¤’ÊÝ’è =================================

    #

    # ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦

    #

    # RSSI‚ª‹KŠiŠO(-NG-)‚Ìê‡‚És‚¤LED§Œä

    #

    # LED ID

    #

    #   1 = POWER(green)

    #   2 = STATUS(red)

    #

    # LED ACTION

    #

    #   0 = OFF

    #   1 = ON

    #   2 = BLINK FAST

    #   3 = BLINK SLOW

    #----------------------------------------------

    #<1>------

    # LED ID

    1

    # LED ACTION

    2

    #<2>------

    # LED ID

    2

    # LED ACTION

    0

    #=== WLANÝ’è =================================

    #

    # <10i“ü—Í>

    #

    # RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

    #

    #   0 = ‘ª’è‚µ‚È‚¢B

    #   1 = ‘ª’è‚·‚éB

    #   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB

    #

    # RSSI‚Ì‹KŠi

    #

    #   min[dBm]

    #   max[dBm]

    #

    # OK count

    # NG count

    #

    # ‘ª’èŽüŠú‚Ì–ÚˆÀ

    #   [‘ª’èƒ`ƒƒƒ“ƒlƒ‹”] ~ 100msec

    #----------------------------------------------

    # <ANTENNA A>

    0

    -80

    -20

    2

    200

    # <ANTENNA B>

    0

    -80

    -20

    2

    200

    # <ANTENNA DIVERSITY>

    0

    -80

    -20

    2

    200

    #=== WLANÝ’è =================================

    #

    # <10i“ü—Í>

    #

    # RSSI‘ª’è‚ðs‚¤ƒ`ƒƒƒ“ƒlƒ‹‚ÌÝ’è

    # 1 - 13ŒÂ‚ðŽw’è

    #

    #   channel < 14 = ‘ª’è‚·‚éB

    #   channel > 13 = ‘ª’è‚µ‚È‚¢B(255ˆÈ‰º)

    #

    #----------------------------------------------

    # 1 - 13ch ‘S‚Ä‘ª’è‚·‚éê‡

    1

    2

    3

    4

    5

    6

    7

    8

    9

    10

    11

    12

    13

    ###############################################

    # samples

    # 1 ‚Æ 13ch ‚¾‚¯‘ª’è‚·‚éê‡

    ##############################################

    #1

    #13

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #END-samples----------------------------------

    #=== APÚ‘±ŒŸ¸ŠÖŒW‚ÌÝ’è ====================

    #

    # RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

    #

    #   0 = ‘ª’è‚µ‚È‚¢B

    #   1 = ‘ª’è‚·‚éB

    #   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB

    #

    # OK count

    # NG count

    #

    # Ú‘±Šm”FŽüŠú‚Ì–ÚˆÀ

    #   100msec

    #

    # <AP>

    #   SSID

    #   IP ADDRESS

    #

    # <COOKIE>

    #   IP ADDRESS

    #   NETMASK

    #   DEFAULT ROUTE

    #   PRIMARY DNS

    #

    #----------------------------------------------

    0

    10

    300

    #<AP>

    LV2DIAG-AP

    192.168.1.1

    #<COOKIE>

    192.168.1.100

    255.255.255.0

    192.168.1.1

    192.168.1.1

    #=== BTÝ’è =================================

    #

    # <10i“ü—Í>

    #

    # RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

    #

    #   0 = ‘ª’è‚µ‚È‚¢B

    #   1 = ‘ª’è‚·‚éB

    #

    # RSSI‚Ì‹KŠi

    #

    #   min[dBm]

    #   max[dBm]

    #

    # OK count

    # NG count

    #

    # ‘ª’èŽüŠú‚Ì–ÚˆÀ

    #   100msec

    #----------------------------------------------

    # <ANTENNA 1>

    0

    -60

    -1

    2

    300

    # <ANTENNA 2>

    0

    -60

    -1

    2

    30

    # <ANTENNA DIVERSITY>

    0

    -60

    -1

    2

    30

    #=== CS Only ================================

    #

    #ƒRƒ“ƒgƒ[ƒ‰[‚ð‚Í‚¸‚·‚Æ‚«‚ÌLED“_“”ƒpƒ^[ƒ“

    #

    # LED ID

    #

    #   1 = POWER(green)

    #   2 = STATUS(red)

    #

    # LED ACTION

    #

    #   0 = OFF

    #   1 = ON

    #   2 = BLINK FAST

    #   3 = BLINK SLOW

    #--------------------------------------------

    #<1>------

    # LED ID

    1

    # LED ACTION

    2

    #<2>------

    # LED ID

    2

    # LED ACTION

    0

    ###############################################

    #=== ‚»‚Ì‘¼€–Ú‚ÌŽÀs‚Ì—L–³ ===================

    # WLAN,BTŒŸ¸‚ÌŒã‚ÉŽÀs‚³‚ê‚é

    #----------------------------------------------

    # Drive Init

    #   0 = ŽÀs‚µ‚È‚¢

    #   1 = ŽÀs‚·‚é

    #----------------------------------------------

    1

    #---------------------------------------------

    # Install Systemsoftware

    #   0 = ŽÀs‚µ‚È‚¢

    #   1 = ŽÀs‚·‚é

    #----------------------------------------------

    1

    #---------------------------------------------

    # freebdp

    #   0 = ŽÀs‚µ‚È‚¢

    #   1 = ŽÀs‚·‚é

    #----------------------------------------------

    0

    #---------------------------------------------

    # Install Systemsoftware ‚ÅŽg—p‚·‚éUpdater–¼

    #----------------------------------------------

    manufacturing_updater_for_reset.self

You must login or register to view this content.

connect the pendrive to the USB port 4 or 2 according to the model and turn on the PS3 console with the Power button.

10 º The TV screen now we should see this
You must login or register to view this content.

indicates that the programs is doing his work to REMARRIED the BD drive to our PS3 with OUR console keys
when it says "PASS" the programs has finish to remmarry you BD drive

You must login or register to view this content.
we let the console to finish the process (about 7 minutes) and turn off by itself.

11 º connect the flash drive to your PC and delete the contents of it
and put at the root of the pendrive the Lv2Diag.self to exit the service mode (it takes about 202 KB)
You must login or register to view this content.
and connect the flash drive to USB 2 or 4 according to the model of your PS3, turn on the console with the Power button and wait till it goes off by herself.

12 º Finally disconnect the flash drive, connect the controller with a USB cable sinaxis to the console and reconfigure the console because rewriting the firmware from the service mode all settings is deleted.

PROBLEMS

Poor connection of the reader or defect in the wires that would cause the downgrade process is interrupted leaving it imcomplet (we recognize that the green light flashes and does not turn off the console), check the connection of theBD drive or try another LOL

A badly edited standalone.cfg file may cause failure in the execution of the program that prevents the reader's remarried, the structure of the file is this:

    ###############################################

# DiagÝ’èƒtƒ@ƒCƒ‹

# —ÊŽŽ—p

# WLAN & BT RSSI‘ª’è

#

# 2006/09/06	kyoshida

#             Eurus‚Ì—L–³ŒŸo‘Î‰ž

# 2006/10/10	kyoshida

#             RSSI’l‚Ì‹KŠi‚ð

#            u’²®ŒŸ¸—v€F06.10.05v‚Ö‡‚í‚¹‚éB

###############################################

#=== ‹¤’ÊÝ’è =================================

#

# Œv‘ªƒ‚[ƒhÝ’è

#

#   0 = ’Êíƒ‰ƒCƒ“ŒŸ¸

#   1 = ƒfƒoƒbƒN Œv‘ªŒJ‚è•Ô‚µ

#----------------------------------------------

0

#=== ‹¤’ÊÝ’è =================================

#

# RSSI‚ª‹KŠi“à‚Ìê‡‚ÉAshutdown‚ðŽÀs‚·‚é‚©H‚ÌÝ’è

#

#   0 = shutdown ‚µ‚È‚¢B

#   1 = shutdown ‚·‚éB

#----------------------------------------------

1

#=== ‹¤’ÊÝ’è =================================

#

# ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦

#

# RSSI‚ª‹KŠi“à(-OK-)‚Ìê‡‚És‚¤LED§Œä

#

# LED ID

#

#   1 = POWER(green)

#   2 = STATUS(red)

#

# LED ACTION

#

#   0 = OFF

#   1 = ON

#   2 = BLINK FAST

#   3 = BLINK SLOW

#----------------------------------------------

#<1>------

# LED ID

1

# LED ACTION

1

#<2>------

# LED ID

2

# LED ACTION

0

#=== ‹¤’ÊÝ’è =================================

#

# ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦

#

# RSSI‚ª‹KŠiŠO(-NG-)‚Ìê‡‚És‚¤LED§Œä

#

# LED ID

#

#   1 = POWER(green)

#   2 = STATUS(red)

#

# LED ACTION

#

#   0 = OFF

#   1 = ON

#   2 = BLINK FAST

#   3 = BLINK SLOW

#----------------------------------------------

#<1>------

# LED ID

1

# LED ACTION

2

#<2>------

# LED ID

2

# LED ACTION

0

#=== WLANÝ’è =================================

#

# <10i“ü—Í>

#

# RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

#

#   0 = ‘ª’è‚µ‚È‚¢B

#   1 = ‘ª’è‚·‚éB

#   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB

#

# RSSI‚Ì‹KŠi

#

#   min[dBm]

#   max[dBm]

#

# OK count

# NG count

#

# ‘ª’èŽüŠú‚Ì–ÚˆÀ

#   [‘ª’èƒ`ƒƒƒ“ƒlƒ‹”] ~ 100msec

#----------------------------------------------

# <ANTENNA A>

0

-80

-20

2

200

# <ANTENNA B>

0

-80

-20

2

200

# <ANTENNA DIVERSITY>

0

-80

-20

2

200

#=== WLANÝ’è =================================

#

# <10i“ü—Í>

#

# RSSI‘ª’è‚ðs‚¤ƒ`ƒƒƒ“ƒlƒ‹‚ÌÝ’è

# 1 - 13ŒÂ‚ðŽw’è

#

#   channel < 14 = ‘ª’è‚·‚éB

#   channel > 13 = ‘ª’è‚µ‚È‚¢B(255ˆÈ‰º)

#

#----------------------------------------------

# 1 - 13ch ‘S‚Ä‘ª’è‚·‚éê‡

1

2

3

4

5

6

7

8

9

10

11

12

13

###############################################

# samples

# 1 ‚Æ 13ch ‚¾‚¯‘ª’è‚·‚éê‡

##############################################

#1

#13

#77

#77

#77

#77

#77

#77

#77

#77

#77

#77

#77

#END-samples----------------------------------

#=== APÚ‘±ŒŸ¸ŠÖŒW‚ÌÝ’è ====================

#

# RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

#

#   0 = ‘ª’è‚µ‚È‚¢B

#   1 = ‘ª’è‚·‚éB

#   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB

#

# OK count

# NG count

#

# Ú‘±Šm”FŽüŠú‚Ì–ÚˆÀ

#   100msec

#

# <AP>

#   SSID

#   IP ADDRESS

#

# <COOKIE>

#   IP ADDRESS

#   NETMASK

#   DEFAULT ROUTE

#   PRIMARY DNS

#

#----------------------------------------------

0

10

300

#<AP>

LV2DIAG-AP

192.168.1.1

#<COOKIE>

192.168.1.100

255.255.255.0

192.168.1.1

192.168.1.1

#=== BTÝ’è =================================

#

# <10i“ü—Í>

#

# RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

#

#   0 = ‘ª’è‚µ‚È‚¢B

#   1 = ‘ª’è‚·‚éB

#

# RSSI‚Ì‹KŠi

#

#   min[dBm]

#   max[dBm]

#

# OK count

# NG count

#

# ‘ª’èŽüŠú‚Ì–ÚˆÀ

#   100msec

#----------------------------------------------

# <ANTENNA 1>

0

-60

-1

2

300

# <ANTENNA 2>

0

-60

-1

2

30

# <ANTENNA DIVERSITY>

0

-60

-1

2

30

#=== CS Only ================================

#

#ƒRƒ“ƒgƒ[ƒ‰[‚ð‚Í‚¸‚·‚Æ‚«‚ÌLED“_“”ƒpƒ^[ƒ“

#

# LED ID

#

#   1 = POWER(green)

#   2 = STATUS(red)

#

# LED ACTION

#

#   0 = OFF

#   1 = ON

#   2 = BLINK FAST

#   3 = BLINK SLOW

#--------------------------------------------

#<1>------

# LED ID

1

# LED ACTION

2

#<2>------

# LED ID

2

# LED ACTION

0

###############################################

#=== ‚»‚Ì‘¼€–Ú‚ÌŽÀs‚Ì—L–³ ===================

# WLAN,BTŒŸ¸‚ÌŒã‚ÉŽÀs‚³‚ê‚é 

#----------------------------------------------

# Drive Init

#   0 = ŽÀs‚µ‚È‚¢

#   1 = ŽÀs‚·‚é

#----------------------------------------------

1

#---------------------------------------------

# Install Systemsoftware

#   0 = ŽÀs‚µ‚È‚¢

#   1 = ŽÀs‚·‚é

#----------------------------------------------

1

#---------------------------------------------

# freebdp

#   0 = ŽÀs‚µ‚È‚¢

#   1 = ŽÀs‚·‚é

#----------------------------------------------

0

#---------------------------------------------

# Install Systemsoftware ‚ÅŽg—p‚·‚éUpdater–¼

#----------------------------------------------

manufacturing_updater_for_reset.self

I hope the tutorial will be helpful to those who have trouble making its downgrade and remarried.
Regards.

You must login or register to view this content.

(adsbygoogle = window.adsbygoogle || []).push({});

The following 12 users say thank you to YnO for this useful post:

-SuBZeRo-, b0snian, DinoFreak, forcer911, HIvkid, jamzyb, kryptx1, MCPADDINGTON, Mr.Pure420, sciz0r, sithxnew,

09-08-2011, 06:27 PM #56

Mr__Shalemari

Vault dweller

540

Posts

65

Reputation

0

Credits

Member

Apr 2011

NextGenUpdate

Originally posted by YnO

PSPmaniaco have made a tutorial in spanish,

FIRST OF ALL, BECAUSE SOME COMMENTS ON THIS THREAD THIS IS NOT A DOWNGRADE FROM 3.56 + this is a tutorial for Re-Marry a BD drivecan you go below your stock firmware with this and can i use my ipod to hold the donlge files?

Seeing the problems is having people make the process of changing readers donwgrade defective or fail to do this tutorial to make the process easier.
We need:
A jig Dongle (in my case a teensy 2.0).
You must login or register to view this content.

The PS3 which we will change the reader and other BD drive (currently only valid with the PS3 FAT 20, 40 and 60 GB as it is that support down to the version 2.30).

You must login or register to view this content.

The files for readers RE-MArried filtered Lv2Diag.self for the service mode (the original and modified for version 3.55) and 3.41 firmwares Spoof to 3.41 (should be in version 3.55), version 3.15 and the 2.30 (PS3UPDATE.PUP).
Spoof Version 3.41 to 3.56
You must login or register to view this content.
Version 3.15
You must login or register to view this content.
Version 2.30
You must login or register to view this content.
(Thanks to Kravenbnc and courtesy of the web DemonHades).

Finally a 512 MB flash drive (minimum) formatted in FAT or FAT32.
You must login or register to view this content.

1, we will dismantle the BD faulty console strip of data by disconnecting the power cord and the reader.
You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

2 º Connect the reader back to the console making sure that the strip of data from the reader is well connected or could crash when re-married drive (watch the locking of the connector that is very fragile so Open it and close it carefully ).
You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

3 Put the new BD drive do it carefully
You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

4 º Now With the console closed put your jig on USB port 1 of the console;
[img] [url]https://img542.imageshack.us/img542/9285/imga0962.jpg[/url] [/ img]

switch the button in rear of the console
and turn ON by pressing Power + Eject quickly (should give 2 beeps to turn on)
[Img]https://img849.imageshack.us/img849/6489/imga0960.jpg[/img]

You must login or register to view this content.

the console will turn on and see the light of the jig as USB lights (varies with the dongle)
You must login or register to view this content.

after that the PS3 should OFF in automatic

5 º'll check this in service mode by turning on the console and you should see this screen
You must login or register to view this content.

If so, turn off your console. if not do it againd XD

6 º connect and formatt a USB in FAT/FAT32
You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

7 º Once finishs
in root of your usb put the files Lv2Diag.self and firmware version 3.41 PS3UPDAT.PUP Spoof of 3.56 (the lv2diag to write the firmware must be 366 KB)
You must login or register to view this content.

and put the device into the USB port 4 if it is a 20/60 GB PS3 or port 2 if a 40 GB PS3
You must login or register to view this content.

and turn on the console with the Power button.

8 The console will light and NO video show during the recording process of the firmware (its normal), takes 5 to 7 minutes to complete the process,

the green light flashes a few seconds and the console will turn off by itself;

fter making the process the console will be in version 3.41 Spoof 3.56, repeat step 7 and go down to version 3.15 FW, repeat it again to download directly from 3.15 to 2.30 simply by changing the PS3UPDAT.PUP

9 º Once the console is in version 2.30 and still in the service mode
connect the flash drive to your PC, delete all contents and put in the files for remarry readers the PS3UPDAT.PUP version 2.30
just like this:
You must login or register to view this content.

and inside the cfg folder has to be this file

            ###############################################

    # DiagÝ’èƒtƒ@ƒCƒ‹

    # —ÊŽŽ—p

    # WLAN & BT RSSI‘ª’è

    #

    # 2006/09/06   kyoshida

    #             Eurus‚Ì—L–³ŒŸo‘Î‰ž

    # 2006/10/10   kyoshida

    #             RSSI’l‚Ì‹KŠi‚ð

    #            u’²®ŒŸ¸—v€F06.10.05v‚Ö‡‚í‚¹‚éB

    ###############################################

    #=== ‹¤’ÊÝ’è =================================

    #

    # Œv‘ªƒ‚[ƒhÝ’è

    #

    #   0 = ’Êíƒ‰ƒCƒ“ŒŸ¸

    #   1 = ƒfƒoƒbƒN Œv‘ªŒJ‚è•Ô‚µ

    #----------------------------------------------

    0

    #=== ‹¤’ÊÝ’è =================================

    #

    # RSSI‚ª‹KŠi“à‚Ìê‡‚ÉAshutdown‚ðŽÀs‚·‚é‚©H‚ÌÝ’è

    #

    #   0 = shutdown ‚µ‚È‚¢B

    #   1 = shutdown ‚·‚éB

    #----------------------------------------------

    1

    #=== ‹¤’ÊÝ’è =================================

    #

    # ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦

    #

    # RSSI‚ª‹KŠi“à(-OK-)‚Ìê‡‚És‚¤LED§Œä

    #

    # LED ID

    #

    #   1 = POWER(green)

    #   2 = STATUS(red)

    #

    # LED ACTION

    #

    #   0 = OFF

    #   1 = ON

    #   2 = BLINK FAST

    #   3 = BLINK SLOW

    #----------------------------------------------

    #<1>------

    # LED ID

    1

    # LED ACTION

    1

    #<2>------

    # LED ID

    2

    # LED ACTION

    0

    #=== ‹¤’ÊÝ’è =================================

    #

    # ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦

    #

    # RSSI‚ª‹KŠiŠO(-NG-)‚Ìê‡‚És‚¤LED§Œä

    #

    # LED ID

    #

    #   1 = POWER(green)

    #   2 = STATUS(red)

    #

    # LED ACTION

    #

    #   0 = OFF

    #   1 = ON

    #   2 = BLINK FAST

    #   3 = BLINK SLOW

    #----------------------------------------------

    #<1>------

    # LED ID

    1

    # LED ACTION

    2

    #<2>------

    # LED ID

    2

    # LED ACTION

    0

    #=== WLANÝ’è =================================

    #

    # <10i“ü—Í>

    #

    # RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

    #

    #   0 = ‘ª’è‚µ‚È‚¢B

    #   1 = ‘ª’è‚·‚éB

    #   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB

    #

    # RSSI‚Ì‹KŠi

    #

    #   min[dBm]

    #   max[dBm]

    #

    # OK count

    # NG count

    #

    # ‘ª’èŽüŠú‚Ì–ÚˆÀ

    #   [‘ª’èƒ`ƒƒƒ“ƒlƒ‹”] ~ 100msec

    #----------------------------------------------

    # <ANTENNA A>

    0

    -80

    -20

    2

    200

    # <ANTENNA B>

    0

    -80

    -20

    2

    200

    # <ANTENNA DIVERSITY>

    0

    -80

    -20

    2

    200

    #=== WLANÝ’è =================================

    #

    # <10i“ü—Í>

    #

    # RSSI‘ª’è‚ðs‚¤ƒ`ƒƒƒ“ƒlƒ‹‚ÌÝ’è

    # 1 - 13ŒÂ‚ðŽw’è

    #

    #   channel < 14 = ‘ª’è‚·‚éB

    #   channel > 13 = ‘ª’è‚µ‚È‚¢B(255ˆÈ‰º)

    #

    #----------------------------------------------

    # 1 - 13ch ‘S‚Ä‘ª’è‚·‚éê‡

    1

    2

    3

    4

    5

    6

    7

    8

    9

    10

    11

    12

    13

    ###############################################

    # samples

    # 1 ‚Æ 13ch ‚¾‚¯‘ª’è‚·‚éê‡

    ##############################################

    #1

    #13

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #END-samples----------------------------------

    #=== APÚ‘±ŒŸ¸ŠÖŒW‚ÌÝ’è ====================

    #

    # RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

    #

    #   0 = ‘ª’è‚µ‚È‚¢B

    #   1 = ‘ª’è‚·‚éB

    #   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB

    #

    # OK count

    # NG count

    #

    # Ú‘±Šm”FŽüŠú‚Ì–ÚˆÀ

    #   100msec

    #

    # <AP>

    #   SSID

    #   IP ADDRESS

    #

    # <COOKIE>

    #   IP ADDRESS

    #   NETMASK

    #   DEFAULT ROUTE

    #   PRIMARY DNS

    #

    #----------------------------------------------

    0

    10

    300

    #<AP>

    LV2DIAG-AP

    192.168.1.1

    #<COOKIE>

    192.168.1.100

    255.255.255.0

    192.168.1.1

    192.168.1.1

    #=== BTÝ’è =================================

    #

    # <10i“ü—Í>

    #

    # RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

    #

    #   0 = ‘ª’è‚µ‚È‚¢B

    #   1 = ‘ª’è‚·‚éB

    #

    # RSSI‚Ì‹KŠi

    #

    #   min[dBm]

    #   max[dBm]

    #

    # OK count

    # NG count

    #

    # ‘ª’èŽüŠú‚Ì–ÚˆÀ

    #   100msec

    #----------------------------------------------

    # <ANTENNA 1>

    0

    -60

    -1

    2

    300

    # <ANTENNA 2>

    0

    -60

    -1

    2

    30

    # <ANTENNA DIVERSITY>

    0

    -60

    -1

    2

    30

    #=== CS Only ================================

    #

    #ƒRƒ“ƒgƒ[ƒ‰[‚ð‚Í‚¸‚·‚Æ‚«‚ÌLED“_“”ƒpƒ^[ƒ“

    #

    # LED ID

    #

    #   1 = POWER(green)

    #   2 = STATUS(red)

    #

    # LED ACTION

    #

    #   0 = OFF

    #   1 = ON

    #   2 = BLINK FAST

    #   3 = BLINK SLOW

    #--------------------------------------------

    #<1>------

    # LED ID

    1

    # LED ACTION

    2

    #<2>------

    # LED ID

    2

    # LED ACTION

    0

    ###############################################

    #=== ‚»‚Ì‘¼€–Ú‚ÌŽÀs‚Ì—L–³ ===================

    # WLAN,BTŒŸ¸‚ÌŒã‚ÉŽÀs‚³‚ê‚é

    #----------------------------------------------

    # Drive Init

    #   0 = ŽÀs‚µ‚È‚¢

    #   1 = ŽÀs‚·‚é

    #----------------------------------------------

    1

    #---------------------------------------------

    # Install Systemsoftware

    #   0 = ŽÀs‚µ‚È‚¢

    #   1 = ŽÀs‚·‚é

    #----------------------------------------------

    1

    #---------------------------------------------

    # freebdp

    #   0 = ŽÀs‚µ‚È‚¢

    #   1 = ŽÀs‚·‚é

    #----------------------------------------------

    0

    #---------------------------------------------

    # Install Systemsoftware ‚ÅŽg—p‚·‚éUpdater–¼

    #----------------------------------------------

    manufacturing_updater_for_reset.self

You must login or register to view this content.

connect the pendrive to the USB port 4 or 2 according to the model and turn on the PS3 console with the Power button.

10 º The TV screen now we should see this
You must login or register to view this content.

indicates that the programs is doing his work to REMARRIED the BD drive to our PS3 with OUR console keys
when it says "PASS" the programs has finish to remmarry you BD drive

You must login or register to view this content.
we let the console to finish the process (about 7 minutes) and turn off by itself.

11 º connect the flash drive to your PC and delete the contents of it
and put at the root of the pendrive the Lv2Diag.self to exit the service mode (it takes about 202 KB)
You must login or register to view this content.
and connect the flash drive to USB 2 or 4 according to the model of your PS3, turn on the console with the Power button and wait till it goes off by herself.

12 º Finally disconnect the flash drive, connect the controller with a USB cable sinaxis to the console and reconfigure the console because rewriting the firmware from the service mode all settings is deleted.

PROBLEMS

Poor connection of the reader or defect in the wires that would cause the downgrade process is interrupted leaving it imcomplet (we recognize that the green light flashes and does not turn off the console), check the connection of theBD drive or try another LOL

A badly edited standalone.cfg file may cause failure in the execution of the program that prevents the reader's remarried, the structure of the file is this:

    ###############################################

# DiagÝ’èƒtƒ@ƒCƒ‹

# —ÊŽŽ—p

# WLAN & BT RSSI‘ª’è

#

# 2006/09/06	kyoshida

#             Eurus‚Ì—L–³ŒŸo‘Î‰ž

# 2006/10/10	kyoshida

#             RSSI’l‚Ì‹KŠi‚ð

#            u’²®ŒŸ¸—v€F06.10.05v‚Ö‡‚í‚¹‚éB

###############################################

#=== ‹¤’ÊÝ’è =================================

#

# Œv‘ªƒ‚[ƒhÝ’è

#

#   0 = ’Êíƒ‰ƒCƒ“ŒŸ¸

#   1 = ƒfƒoƒbƒN Œv‘ªŒJ‚è•Ô‚µ

#----------------------------------------------

0

#=== ‹¤’ÊÝ’è =================================

#

# RSSI‚ª‹KŠi“à‚Ìê‡‚ÉAshutdown‚ðŽÀs‚·‚é‚©H‚ÌÝ’è

#

#   0 = shutdown ‚µ‚È‚¢B

#   1 = shutdown ‚·‚éB

#----------------------------------------------

1

#=== ‹¤’ÊÝ’è =================================

#

# ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦

#

# RSSI‚ª‹KŠi“à(-OK-)‚Ìê‡‚És‚¤LED§Œä

#

# LED ID

#

#   1 = POWER(green)

#   2 = STATUS(red)

#

# LED ACTION

#

#   0 = OFF

#   1 = ON

#   2 = BLINK FAST

#   3 = BLINK SLOW

#----------------------------------------------

#<1>------

# LED ID

1

# LED ACTION

1

#<2>------

# LED ID

2

# LED ACTION

0

#=== ‹¤’ÊÝ’è =================================

#

# ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦

#

# RSSI‚ª‹KŠiŠO(-NG-)‚Ìê‡‚És‚¤LED§Œä

#

# LED ID

#

#   1 = POWER(green)

#   2 = STATUS(red)

#

# LED ACTION

#

#   0 = OFF

#   1 = ON

#   2 = BLINK FAST

#   3 = BLINK SLOW

#----------------------------------------------

#<1>------

# LED ID

1

# LED ACTION

2

#<2>------

# LED ID

2

# LED ACTION

0

#=== WLANÝ’è =================================

#

# <10i“ü—Í>

#

# RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

#

#   0 = ‘ª’è‚µ‚È‚¢B

#   1 = ‘ª’è‚·‚éB

#   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB

#

# RSSI‚Ì‹KŠi

#

#   min[dBm]

#   max[dBm]

#

# OK count

# NG count

#

# ‘ª’èŽüŠú‚Ì–ÚˆÀ

#   [‘ª’èƒ`ƒƒƒ“ƒlƒ‹”] ~ 100msec

#----------------------------------------------

# <ANTENNA A>

0

-80

-20

2

200

# <ANTENNA B>

0

-80

-20

2

200

# <ANTENNA DIVERSITY>

0

-80

-20

2

200

#=== WLANÝ’è =================================

#

# <10i“ü—Í>

#

# RSSI‘ª’è‚ðs‚¤ƒ`ƒƒƒ“ƒlƒ‹‚ÌÝ’è

# 1 - 13ŒÂ‚ðŽw’è

#

#   channel < 14 = ‘ª’è‚·‚éB

#   channel > 13 = ‘ª’è‚µ‚È‚¢B(255ˆÈ‰º)

#

#----------------------------------------------

# 1 - 13ch ‘S‚Ä‘ª’è‚·‚éê‡

1

2

3

4

5

6

7

8

9

10

11

12

13

###############################################

# samples

# 1 ‚Æ 13ch ‚¾‚¯‘ª’è‚·‚éê‡

##############################################

#1

#13

#77

#77

#77

#77

#77

#77

#77

#77

#77

#77

#77

#END-samples----------------------------------

#=== APÚ‘±ŒŸ¸ŠÖŒW‚ÌÝ’è ====================

#

# RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

#

#   0 = ‘ª’è‚µ‚È‚¢B

#   1 = ‘ª’è‚·‚éB

#   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB

#

# OK count

# NG count

#

# Ú‘±Šm”FŽüŠú‚Ì–ÚˆÀ

#   100msec

#

# <AP>

#   SSID

#   IP ADDRESS

#

# <COOKIE>

#   IP ADDRESS

#   NETMASK

#   DEFAULT ROUTE

#   PRIMARY DNS

#

#----------------------------------------------

0

10

300

#<AP>

LV2DIAG-AP

192.168.1.1

#<COOKIE>

192.168.1.100

255.255.255.0

192.168.1.1

192.168.1.1

#=== BTÝ’è =================================

#

# <10i“ü—Í>

#

# RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

#

#   0 = ‘ª’è‚µ‚È‚¢B

#   1 = ‘ª’è‚·‚éB

#

# RSSI‚Ì‹KŠi

#

#   min[dBm]

#   max[dBm]

#

# OK count

# NG count

#

# ‘ª’èŽüŠú‚Ì–ÚˆÀ

#   100msec

#----------------------------------------------

# <ANTENNA 1>

0

-60

-1

2

300

# <ANTENNA 2>

0

-60

-1

2

30

# <ANTENNA DIVERSITY>

0

-60

-1

2

30

#=== CS Only ================================

#

#ƒRƒ“ƒgƒ[ƒ‰[‚ð‚Í‚¸‚·‚Æ‚«‚ÌLED“_“”ƒpƒ^[ƒ“

#

# LED ID

#

#   1 = POWER(green)

#   2 = STATUS(red)

#

# LED ACTION

#

#   0 = OFF

#   1 = ON

#   2 = BLINK FAST

#   3 = BLINK SLOW

#--------------------------------------------

#<1>------

# LED ID

1

# LED ACTION

2

#<2>------

# LED ID

2

# LED ACTION

0

###############################################

#=== ‚»‚Ì‘¼€–Ú‚ÌŽÀs‚Ì—L–³ ===================

# WLAN,BTŒŸ¸‚ÌŒã‚ÉŽÀs‚³‚ê‚é 

#----------------------------------------------

# Drive Init

#   0 = ŽÀs‚µ‚È‚¢

#   1 = ŽÀs‚·‚é

#----------------------------------------------

1

#---------------------------------------------

# Install Systemsoftware

#   0 = ŽÀs‚µ‚È‚¢

#   1 = ŽÀs‚·‚é

#----------------------------------------------

1

#---------------------------------------------

# freebdp

#   0 = ŽÀs‚µ‚È‚¢

#   1 = ŽÀs‚·‚é

#----------------------------------------------

0

#---------------------------------------------

# Install Systemsoftware ‚ÅŽg—p‚·‚éUpdater–¼

#----------------------------------------------

manufacturing_updater_for_reset.self

I hope the tutorial will be helpful to those who have trouble making its downgrade and remarried.
Regards.

You must login or register to view this content.

can i go below my factory firmware with this, i wanna get my ps3 from 3.55 to 3.15 or 3.41

09-08-2011, 06:28 PM #57

Mr__Shalemari

Vault dweller

540

Posts

65

Reputation

0

Credits

Member

Apr 2011

NextGenUpdate

Originally posted by YnO

PSPmaniaco have made a tutorial in spanish,

FIRST OF ALL, BECAUSE SOME COMMENTS ON THIS THREAD THIS IS NOT A DOWNGRADE FROM 3.56 + this is a tutorial for Re-Marry a BD drivecan you go below your stock firmware with this and can i use my ipod to hold the donlge files?

Seeing the problems is having people make the process of changing readers donwgrade defective or fail to do this tutorial to make the process easier.
We need:
A jig Dongle (in my case a teensy 2.0).
You must login or register to view this content.

The PS3 which we will change the reader and other BD drive (currently only valid with the PS3 FAT 20, 40 and 60 GB as it is that support down to the version 2.30).

You must login or register to view this content.

The files for readers RE-MArried filtered Lv2Diag.self for the service mode (the original and modified for version 3.55) and 3.41 firmwares Spoof to 3.41 (should be in version 3.55), version 3.15 and the 2.30 (PS3UPDATE.PUP).
Spoof Version 3.41 to 3.56
You must login or register to view this content.
Version 3.15
You must login or register to view this content.
Version 2.30
You must login or register to view this content.
(Thanks to Kravenbnc and courtesy of the web DemonHades).

Finally a 512 MB flash drive (minimum) formatted in FAT or FAT32.
You must login or register to view this content.

1, we will dismantle the BD faulty console strip of data by disconnecting the power cord and the reader.
You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

2 º Connect the reader back to the console making sure that the strip of data from the reader is well connected or could crash when re-married drive (watch the locking of the connector that is very fragile so Open it and close it carefully ).
You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

3 Put the new BD drive do it carefully
You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

4 º Now With the console closed put your jig on USB port 1 of the console;
[img] [url]https://img542.imageshack.us/img542/9285/imga0962.jpg[/url] [/ img]

switch the button in rear of the console
and turn ON by pressing Power + Eject quickly (should give 2 beeps to turn on)
[Img]https://img849.imageshack.us/img849/6489/imga0960.jpg[/img]

You must login or register to view this content.

the console will turn on and see the light of the jig as USB lights (varies with the dongle)
You must login or register to view this content.

after that the PS3 should OFF in automatic

5 º'll check this in service mode by turning on the console and you should see this screen
You must login or register to view this content.

If so, turn off your console. if not do it againd XD

6 º connect and formatt a USB in FAT/FAT32
You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

7 º Once finishs
in root of your usb put the files Lv2Diag.self and firmware version 3.41 PS3UPDAT.PUP Spoof of 3.56 (the lv2diag to write the firmware must be 366 KB)
You must login or register to view this content.

and put the device into the USB port 4 if it is a 20/60 GB PS3 or port 2 if a 40 GB PS3
You must login or register to view this content.

and turn on the console with the Power button.

8 The console will light and NO video show during the recording process of the firmware (its normal), takes 5 to 7 minutes to complete the process,

the green light flashes a few seconds and the console will turn off by itself;

fter making the process the console will be in version 3.41 Spoof 3.56, repeat step 7 and go down to version 3.15 FW, repeat it again to download directly from 3.15 to 2.30 simply by changing the PS3UPDAT.PUP

9 º Once the console is in version 2.30 and still in the service mode
connect the flash drive to your PC, delete all contents and put in the files for remarry readers the PS3UPDAT.PUP version 2.30
just like this:
You must login or register to view this content.

and inside the cfg folder has to be this file

            ###############################################

    # DiagÝ’èƒtƒ@ƒCƒ‹

    # —ÊŽŽ—p

    # WLAN & BT RSSI‘ª’è

    #

    # 2006/09/06   kyoshida

    #             Eurus‚Ì—L–³ŒŸo‘Î‰ž

    # 2006/10/10   kyoshida

    #             RSSI’l‚Ì‹KŠi‚ð

    #            u’²®ŒŸ¸—v€F06.10.05v‚Ö‡‚í‚¹‚éB

    ###############################################

    #=== ‹¤’ÊÝ’è =================================

    #

    # Œv‘ªƒ‚[ƒhÝ’è

    #

    #   0 = ’Êíƒ‰ƒCƒ“ŒŸ¸

    #   1 = ƒfƒoƒbƒN Œv‘ªŒJ‚è•Ô‚µ

    #----------------------------------------------

    0

    #=== ‹¤’ÊÝ’è =================================

    #

    # RSSI‚ª‹KŠi“à‚Ìê‡‚ÉAshutdown‚ðŽÀs‚·‚é‚©H‚ÌÝ’è

    #

    #   0 = shutdown ‚µ‚È‚¢B

    #   1 = shutdown ‚·‚éB

    #----------------------------------------------

    1

    #=== ‹¤’ÊÝ’è =================================

    #

    # ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦

    #

    # RSSI‚ª‹KŠi“à(-OK-)‚Ìê‡‚És‚¤LED§Œä

    #

    # LED ID

    #

    #   1 = POWER(green)

    #   2 = STATUS(red)

    #

    # LED ACTION

    #

    #   0 = OFF

    #   1 = ON

    #   2 = BLINK FAST

    #   3 = BLINK SLOW

    #----------------------------------------------

    #<1>------

    # LED ID

    1

    # LED ACTION

    1

    #<2>------

    # LED ID

    2

    # LED ACTION

    0

    #=== ‹¤’ÊÝ’è =================================

    #

    # ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦

    #

    # RSSI‚ª‹KŠiŠO(-NG-)‚Ìê‡‚És‚¤LED§Œä

    #

    # LED ID

    #

    #   1 = POWER(green)

    #   2 = STATUS(red)

    #

    # LED ACTION

    #

    #   0 = OFF

    #   1 = ON

    #   2 = BLINK FAST

    #   3 = BLINK SLOW

    #----------------------------------------------

    #<1>------

    # LED ID

    1

    # LED ACTION

    2

    #<2>------

    # LED ID

    2

    # LED ACTION

    0

    #=== WLANÝ’è =================================

    #

    # <10i“ü—Í>

    #

    # RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

    #

    #   0 = ‘ª’è‚µ‚È‚¢B

    #   1 = ‘ª’è‚·‚éB

    #   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB

    #

    # RSSI‚Ì‹KŠi

    #

    #   min[dBm]

    #   max[dBm]

    #

    # OK count

    # NG count

    #

    # ‘ª’èŽüŠú‚Ì–ÚˆÀ

    #   [‘ª’èƒ`ƒƒƒ“ƒlƒ‹”] ~ 100msec

    #----------------------------------------------

    # <ANTENNA A>

    0

    -80

    -20

    2

    200

    # <ANTENNA B>

    0

    -80

    -20

    2

    200

    # <ANTENNA DIVERSITY>

    0

    -80

    -20

    2

    200

    #=== WLANÝ’è =================================

    #

    # <10i“ü—Í>

    #

    # RSSI‘ª’è‚ðs‚¤ƒ`ƒƒƒ“ƒlƒ‹‚ÌÝ’è

    # 1 - 13ŒÂ‚ðŽw’è

    #

    #   channel < 14 = ‘ª’è‚·‚éB

    #   channel > 13 = ‘ª’è‚µ‚È‚¢B(255ˆÈ‰º)

    #

    #----------------------------------------------

    # 1 - 13ch ‘S‚Ä‘ª’è‚·‚éê‡

    1

    2

    3

    4

    5

    6

    7

    8

    9

    10

    11

    12

    13

    ###############################################

    # samples

    # 1 ‚Æ 13ch ‚¾‚¯‘ª’è‚·‚éê‡

    ##############################################

    #1

    #13

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #END-samples----------------------------------

    #=== APÚ‘±ŒŸ¸ŠÖŒW‚ÌÝ’è ====================

    #

    # RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

    #

    #   0 = ‘ª’è‚µ‚È‚¢B

    #   1 = ‘ª’è‚·‚éB

    #   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB

    #

    # OK count

    # NG count

    #

    # Ú‘±Šm”FŽüŠú‚Ì–ÚˆÀ

    #   100msec

    #

    # <AP>

    #   SSID

    #   IP ADDRESS

    #

    # <COOKIE>

    #   IP ADDRESS

    #   NETMASK

    #   DEFAULT ROUTE

    #   PRIMARY DNS

    #

    #----------------------------------------------

    0

    10

    300

    #<AP>

    LV2DIAG-AP

    192.168.1.1

    #<COOKIE>

    192.168.1.100

    255.255.255.0

    192.168.1.1

    192.168.1.1

    #=== BTÝ’è =================================

    #

    # <10i“ü—Í>

    #

    # RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

    #

    #   0 = ‘ª’è‚µ‚È‚¢B

    #   1 = ‘ª’è‚·‚éB

    #

    # RSSI‚Ì‹KŠi

    #

    #   min[dBm]

    #   max[dBm]

    #

    # OK count

    # NG count

    #

    # ‘ª’èŽüŠú‚Ì–ÚˆÀ

    #   100msec

    #----------------------------------------------

    # <ANTENNA 1>

    0

    -60

    -1

    2

    300

    # <ANTENNA 2>

    0

    -60

    -1

    2

    30

    # <ANTENNA DIVERSITY>

    0

    -60

    -1

    2

    30

    #=== CS Only ================================

    #

    #ƒRƒ“ƒgƒ[ƒ‰[‚ð‚Í‚¸‚·‚Æ‚«‚ÌLED“_“”ƒpƒ^[ƒ“

    #

    # LED ID

    #

    #   1 = POWER(green)

    #   2 = STATUS(red)

    #

    # LED ACTION

    #

    #   0 = OFF

    #   1 = ON

    #   2 = BLINK FAST

    #   3 = BLINK SLOW

    #--------------------------------------------

    #<1>------

    # LED ID

    1

    # LED ACTION

    2

    #<2>------

    # LED ID

    2

    # LED ACTION

    0

    ###############################################

    #=== ‚»‚Ì‘¼€–Ú‚ÌŽÀs‚Ì—L–³ ===================

    # WLAN,BTŒŸ¸‚ÌŒã‚ÉŽÀs‚³‚ê‚é

    #----------------------------------------------

    # Drive Init

    #   0 = ŽÀs‚µ‚È‚¢

    #   1 = ŽÀs‚·‚é

    #----------------------------------------------

    1

    #---------------------------------------------

    # Install Systemsoftware

    #   0 = ŽÀs‚µ‚È‚¢

    #   1 = ŽÀs‚·‚é

    #----------------------------------------------

    1

    #---------------------------------------------

    # freebdp

    #   0 = ŽÀs‚µ‚È‚¢

    #   1 = ŽÀs‚·‚é

    #----------------------------------------------

    0

    #---------------------------------------------

    # Install Systemsoftware ‚ÅŽg—p‚·‚éUpdater–¼

    #----------------------------------------------

    manufacturing_updater_for_reset.self

You must login or register to view this content.

connect the pendrive to the USB port 4 or 2 according to the model and turn on the PS3 console with the Power button.

10 º The TV screen now we should see this
You must login or register to view this content.

indicates that the programs is doing his work to REMARRIED the BD drive to our PS3 with OUR console keys
when it says "PASS" the programs has finish to remmarry you BD drive

You must login or register to view this content.
we let the console to finish the process (about 7 minutes) and turn off by itself.

11 º connect the flash drive to your PC and delete the contents of it
and put at the root of the pendrive the Lv2Diag.self to exit the service mode (it takes about 202 KB)
You must login or register to view this content.
and connect the flash drive to USB 2 or 4 according to the model of your PS3, turn on the console with the Power button and wait till it goes off by herself.

12 º Finally disconnect the flash drive, connect the controller with a USB cable sinaxis to the console and reconfigure the console because rewriting the firmware from the service mode all settings is deleted.

PROBLEMS

Poor connection of the reader or defect in the wires that would cause the downgrade process is interrupted leaving it imcomplet (we recognize that the green light flashes and does not turn off the console), check the connection of theBD drive or try another LOL

A badly edited standalone.cfg file may cause failure in the execution of the program that prevents the reader's remarried, the structure of the file is this:

    ###############################################

# DiagÝ’èƒtƒ@ƒCƒ‹

# —ÊŽŽ—p

# WLAN & BT RSSI‘ª’è

#

# 2006/09/06	kyoshida

#             Eurus‚Ì—L–³ŒŸo‘Î‰ž

# 2006/10/10	kyoshida

#             RSSI’l‚Ì‹KŠi‚ð

#            u’²®ŒŸ¸—v€F06.10.05v‚Ö‡‚í‚¹‚éB

###############################################

#=== ‹¤’ÊÝ’è =================================

#

# Œv‘ªƒ‚[ƒhÝ’è

#

#   0 = ’Êíƒ‰ƒCƒ“ŒŸ¸

#   1 = ƒfƒoƒbƒN Œv‘ªŒJ‚è•Ô‚µ

#----------------------------------------------

0

#=== ‹¤’ÊÝ’è =================================

#

# RSSI‚ª‹KŠi“à‚Ìê‡‚ÉAshutdown‚ðŽÀs‚·‚é‚©H‚ÌÝ’è

#

#   0 = shutdown ‚µ‚È‚¢B

#   1 = shutdown ‚·‚éB

#----------------------------------------------

1

#=== ‹¤’ÊÝ’è =================================

#

# ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦

#

# RSSI‚ª‹KŠi“à(-OK-)‚Ìê‡‚És‚¤LED§Œä

#

# LED ID

#

#   1 = POWER(green)

#   2 = STATUS(red)

#

# LED ACTION

#

#   0 = OFF

#   1 = ON

#   2 = BLINK FAST

#   3 = BLINK SLOW

#----------------------------------------------

#<1>------

# LED ID

1

# LED ACTION

1

#<2>------

# LED ID

2

# LED ACTION

0

#=== ‹¤’ÊÝ’è =================================

#

# ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦

#

# RSSI‚ª‹KŠiŠO(-NG-)‚Ìê‡‚És‚¤LED§Œä

#

# LED ID

#

#   1 = POWER(green)

#   2 = STATUS(red)

#

# LED ACTION

#

#   0 = OFF

#   1 = ON

#   2 = BLINK FAST

#   3 = BLINK SLOW

#----------------------------------------------

#<1>------

# LED ID

1

# LED ACTION

2

#<2>------

# LED ID

2

# LED ACTION

0

#=== WLANÝ’è =================================

#

# <10i“ü—Í>

#

# RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

#

#   0 = ‘ª’è‚µ‚È‚¢B

#   1 = ‘ª’è‚·‚éB

#   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB

#

# RSSI‚Ì‹KŠi

#

#   min[dBm]

#   max[dBm]

#

# OK count

# NG count

#

# ‘ª’èŽüŠú‚Ì–ÚˆÀ

#   [‘ª’èƒ`ƒƒƒ“ƒlƒ‹”] ~ 100msec

#----------------------------------------------

# <ANTENNA A>

0

-80

-20

2

200

# <ANTENNA B>

0

-80

-20

2

200

# <ANTENNA DIVERSITY>

0

-80

-20

2

200

#=== WLANÝ’è =================================

#

# <10i“ü—Í>

#

# RSSI‘ª’è‚ðs‚¤ƒ`ƒƒƒ“ƒlƒ‹‚ÌÝ’è

# 1 - 13ŒÂ‚ðŽw’è

#

#   channel < 14 = ‘ª’è‚·‚éB

#   channel > 13 = ‘ª’è‚µ‚È‚¢B(255ˆÈ‰º)

#

#----------------------------------------------

# 1 - 13ch ‘S‚Ä‘ª’è‚·‚éê‡

1

2

3

4

5

6

7

8

9

10

11

12

13

###############################################

# samples

# 1 ‚Æ 13ch ‚¾‚¯‘ª’è‚·‚éê‡

##############################################

#1

#13

#77

#77

#77

#77

#77

#77

#77

#77

#77

#77

#77

#END-samples----------------------------------

#=== APÚ‘±ŒŸ¸ŠÖŒW‚ÌÝ’è ====================

#

# RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

#

#   0 = ‘ª’è‚µ‚È‚¢B

#   1 = ‘ª’è‚·‚éB

#   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB

#

# OK count

# NG count

#

# Ú‘±Šm”FŽüŠú‚Ì–ÚˆÀ

#   100msec

#

# <AP>

#   SSID

#   IP ADDRESS

#

# <COOKIE>

#   IP ADDRESS

#   NETMASK

#   

Regards. 



[url=https://www.demonhades.org/foro/viewtopic.php?f=112&t=4976#p31957]SOURCE & Tutorial in spanish here[/url][/QUOTE]can i go below my factory firmware with this, i wanna get my ps3 from 3.55 to 3.15 or 3.41

09-14-2011, 07:13 PM #58

-SuBZeRo-

Banned

133

Posts

125

Reputation

0

Credits

Banned

Dec 2008

NextGenUpdate

Need some help, im in factory/service mode, i managed to downgrade from 3.55 to 3.41 spoofed to 3.56, when i swap the ps3updat.pup to the 3.15 and boot with the mem stick in, the ps3 goes straight to the xmb in system settings it says im on 3.41 not sure if its meant to though as you stated its 3.41 spoofed to 3.56, so wouldnt it say 3.56 ? :\
So all in all im on 3.41 and it wont let me downgrade to 3.15.

Originally posted by YnO

PSPmaniaco have made a tutorial in spanish,

FIRST OF ALL, BECAUSE SOME COMMENTS ON THIS THREAD THIS IS NOT A DOWNGRADE FROM 3.56 + this is a tutorial for Re-Marry a BD drive

Seeing the problems is having people make the process of changing readers donwgrade defective or fail to do this tutorial to make the process easier.
We need:
A jig Dongle (in my case a teensy 2.0).
You must login or register to view this content.

The PS3 which we will change the reader and other BD drive (currently only valid with the PS3 FAT 20, 40 and 60 GB as it is that support down to the version 2.30).

You must login or register to view this content.

The files for readers RE-MArried filtered Lv2Diag.self for the service mode (the original and modified for version 3.55) and 3.41 firmwares Spoof to 3.41 (should be in version 3.55), version 3.15 and the 2.30 (PS3UPDATE.PUP).
Spoof Version 3.41 to 3.56
You must login or register to view this content.
Version 3.15
You must login or register to view this content.
Version 2.30
You must login or register to view this content.
(Thanks to Kravenbnc and courtesy of the web DemonHades).

Finally a 512 MB flash drive (minimum) formatted in FAT or FAT32.
You must login or register to view this content.

1, we will dismantle the BD faulty console strip of data by disconnecting the power cord and the reader.
You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

2 º Connect the reader back to the console making sure that the strip of data from the reader is well connected or could crash when re-married drive (watch the locking of the connector that is very fragile so Open it and close it carefully ).
You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

3 Put the new BD drive do it carefully
You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

4 º Now With the console closed put your jig on USB port 1 of the console;
[img] [url]https://img542.imageshack.us/img542/9285/imga0962.jpg[/url] [/ img]

switch the button in rear of the console
and turn ON by pressing Power + Eject quickly (should give 2 beeps to turn on)
[Img]https://img849.imageshack.us/img849/6489/imga0960.jpg[/img]

You must login or register to view this content.

the console will turn on and see the light of the jig as USB lights (varies with the dongle)
You must login or register to view this content.

after that the PS3 should OFF in automatic

5 º'll check this in service mode by turning on the console and you should see this screen
You must login or register to view this content.

If so, turn off your console. if not do it againd XD

6 º connect and formatt a USB in FAT/FAT32
You must login or register to view this content.

You must login or register to view this content.

You must login or register to view this content.

7 º Once finishs
in root of your usb put the files Lv2Diag.self and firmware version 3.41 PS3UPDAT.PUP Spoof of 3.56 (the lv2diag to write the firmware must be 366 KB)
You must login or register to view this content.

and put the device into the USB port 4 if it is a 20/60 GB PS3 or port 2 if a 40 GB PS3
You must login or register to view this content.

and turn on the console with the Power button.

8 The console will light and NO video show during the recording process of the firmware (its normal), takes 5 to 7 minutes to complete the process,

the green light flashes a few seconds and the console will turn off by itself;

fter making the process the console will be in version 3.41 Spoof 3.56, repeat step 7 and go down to version 3.15 FW, repeat it again to download directly from 3.15 to 2.30 simply by changing the PS3UPDAT.PUP

9 º Once the console is in version 2.30 and still in the service mode
connect the flash drive to your PC, delete all contents and put in the files for remarry readers the PS3UPDAT.PUP version 2.30
just like this:
You must login or register to view this content.

and inside the cfg folder has to be this file

            ###############################################

    # DiagÝ’èƒtƒ@ƒCƒ‹

    # —ÊŽŽ—p

    # WLAN & BT RSSI‘ª’è

    #

    # 2006/09/06   kyoshida

    #             Eurus‚Ì—L–³ŒŸo‘Î‰ž

    # 2006/10/10   kyoshida

    #             RSSI’l‚Ì‹KŠi‚ð

    #            u’²®ŒŸ¸—v€F06.10.05v‚Ö‡‚í‚¹‚éB

    ###############################################

    #=== ‹¤’ÊÝ’è =================================

    #

    # Œv‘ªƒ‚[ƒhÝ’è

    #

    #   0 = ’Êíƒ‰ƒCƒ“ŒŸ¸

    #   1 = ƒfƒoƒbƒN Œv‘ªŒJ‚è•Ô‚µ

    #----------------------------------------------

    0

    #=== ‹¤’ÊÝ’è =================================

    #

    # RSSI‚ª‹KŠi“à‚Ìê‡‚ÉAshutdown‚ðŽÀs‚·‚é‚©H‚ÌÝ’è

    #

    #   0 = shutdown ‚µ‚È‚¢B

    #   1 = shutdown ‚·‚éB

    #----------------------------------------------

    1

    #=== ‹¤’ÊÝ’è =================================

    #

    # ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦

    #

    # RSSI‚ª‹KŠi“à(-OK-)‚Ìê‡‚És‚¤LED§Œä

    #

    # LED ID

    #

    #   1 = POWER(green)

    #   2 = STATUS(red)

    #

    # LED ACTION

    #

    #   0 = OFF

    #   1 = ON

    #   2 = BLINK FAST

    #   3 = BLINK SLOW

    #----------------------------------------------

    #<1>------

    # LED ID

    1

    # LED ACTION

    1

    #<2>------

    # LED ID

    2

    # LED ACTION

    0

    #=== ‹¤’ÊÝ’è =================================

    #

    # ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦

    #

    # RSSI‚ª‹KŠiŠO(-NG-)‚Ìê‡‚És‚¤LED§Œä

    #

    # LED ID

    #

    #   1 = POWER(green)

    #   2 = STATUS(red)

    #

    # LED ACTION

    #

    #   0 = OFF

    #   1 = ON

    #   2 = BLINK FAST

    #   3 = BLINK SLOW

    #----------------------------------------------

    #<1>------

    # LED ID

    1

    # LED ACTION

    2

    #<2>------

    # LED ID

    2

    # LED ACTION

    0

    #=== WLANÝ’è =================================

    #

    # <10i“ü—Í>

    #

    # RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

    #

    #   0 = ‘ª’è‚µ‚È‚¢B

    #   1 = ‘ª’è‚·‚éB

    #   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB

    #

    # RSSI‚Ì‹KŠi

    #

    #   min[dBm]

    #   max[dBm]

    #

    # OK count

    # NG count

    #

    # ‘ª’èŽüŠú‚Ì–ÚˆÀ

    #   [‘ª’èƒ`ƒƒƒ“ƒlƒ‹”] ~ 100msec

    #----------------------------------------------

    # <ANTENNA A>

    0

    -80

    -20

    2

    200

    # <ANTENNA B>

    0

    -80

    -20

    2

    200

    # <ANTENNA DIVERSITY>

    0

    -80

    -20

    2

    200

    #=== WLANÝ’è =================================

    #

    # <10i“ü—Í>

    #

    # RSSI‘ª’è‚ðs‚¤ƒ`ƒƒƒ“ƒlƒ‹‚ÌÝ’è

    # 1 - 13ŒÂ‚ðŽw’è

    #

    #   channel < 14 = ‘ª’è‚·‚éB

    #   channel > 13 = ‘ª’è‚µ‚È‚¢B(255ˆÈ‰º)

    #

    #----------------------------------------------

    # 1 - 13ch ‘S‚Ä‘ª’è‚·‚éê‡

    1

    2

    3

    4

    5

    6

    7

    8

    9

    10

    11

    12

    13

    ###############################################

    # samples

    # 1 ‚Æ 13ch ‚¾‚¯‘ª’è‚·‚éê‡

    ##############################################

    #1

    #13

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #77

    #END-samples----------------------------------

    #=== APÚ‘±ŒŸ¸ŠÖŒW‚ÌÝ’è ====================

    #

    # RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

    #

    #   0 = ‘ª’è‚µ‚È‚¢B

    #   1 = ‘ª’è‚·‚éB

    #   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB

    #

    # OK count

    # NG count

    #

    # Ú‘±Šm”FŽüŠú‚Ì–ÚˆÀ

    #   100msec

    #

    # <AP>

    #   SSID

    #   IP ADDRESS

    #

    # <COOKIE>

    #   IP ADDRESS

    #   NETMASK

    #   DEFAULT ROUTE

    #   PRIMARY DNS

    #

    #----------------------------------------------

    0

    10

    300

    #<AP>

    LV2DIAG-AP

    192.168.1.1

    #<COOKIE>

    192.168.1.100

    255.255.255.0

    192.168.1.1

    192.168.1.1

    #=== BTÝ’è =================================

    #

    # <10i“ü—Í>

    #

    # RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

    #

    #   0 = ‘ª’è‚µ‚È‚¢B

    #   1 = ‘ª’è‚·‚éB

    #

    # RSSI‚Ì‹KŠi

    #

    #   min[dBm]

    #   max[dBm]

    #

    # OK count

    # NG count

    #

    # ‘ª’èŽüŠú‚Ì–ÚˆÀ

    #   100msec

    #----------------------------------------------

    # <ANTENNA 1>

    0

    -60

    -1

    2

    300

    # <ANTENNA 2>

    0

    -60

    -1

    2

    30

    # <ANTENNA DIVERSITY>

    0

    -60

    -1

    2

    30

    #=== CS Only ================================

    #

    #ƒRƒ“ƒgƒ[ƒ‰[‚ð‚Í‚¸‚·‚Æ‚«‚ÌLED“_“”ƒpƒ^[ƒ“

    #

    # LED ID

    #

    #   1 = POWER(green)

    #   2 = STATUS(red)

    #

    # LED ACTION

    #

    #   0 = OFF

    #   1 = ON

    #   2 = BLINK FAST

    #   3 = BLINK SLOW

    #--------------------------------------------

    #<1>------

    # LED ID

    1

    # LED ACTION

    2

    #<2>------

    # LED ID

    2

    # LED ACTION

    0

    ###############################################

    #=== ‚»‚Ì‘¼€–Ú‚ÌŽÀs‚Ì—L–³ ===================

    # WLAN,BTŒŸ¸‚ÌŒã‚ÉŽÀs‚³‚ê‚é

    #----------------------------------------------

    # Drive Init

    #   0 = ŽÀs‚µ‚È‚¢

    #   1 = ŽÀs‚·‚é

    #----------------------------------------------

    1

    #---------------------------------------------

    # Install Systemsoftware

    #   0 = ŽÀs‚µ‚È‚¢

    #   1 = ŽÀs‚·‚é

    #----------------------------------------------

    1

    #---------------------------------------------

    # freebdp

    #   0 = ŽÀs‚µ‚È‚¢

    #   1 = ŽÀs‚·‚é

    #----------------------------------------------

    0

    #---------------------------------------------

    # Install Systemsoftware ‚ÅŽg—p‚·‚éUpdater–¼

    #----------------------------------------------

    manufacturing_updater_for_reset.self

You must login or register to view this content.

connect the pendrive to the USB port 4 or 2 according to the model and turn on the PS3 console with the Power button.

10 º The TV screen now we should see this
You must login or register to view this content.

indicates that the programs is doing his work to REMARRIED the BD drive to our PS3 with OUR console keys
when it says "PASS" the programs has finish to remmarry you BD drive

You must login or register to view this content.
we let the console to finish the process (about 7 minutes) and turn off by itself.

11 º connect the flash drive to your PC and delete the contents of it
and put at the root of the pendrive the Lv2Diag.self to exit the service mode (it takes about 202 KB)
You must login or register to view this content.
and connect the flash drive to USB 2 or 4 according to the model of your PS3, turn on the console with the Power button and wait till it goes off by herself.

12 º Finally disconnect the flash drive, connect the controller with a USB cable sinaxis to the console and reconfigure the console because rewriting the firmware from the service mode all settings is deleted.

PROBLEMS

Poor connection of the reader or defect in the wires that would cause the downgrade process is interrupted leaving it imcomplet (we recognize that the green light flashes and does not turn off the console), check the connection of theBD drive or try another LOL

A badly edited standalone.cfg file may cause failure in the execution of the program that prevents the reader's remarried, the structure of the file is this:

    ###############################################

# DiagÝ’èƒtƒ@ƒCƒ‹

# —ÊŽŽ—p

# WLAN & BT RSSI‘ª’è

#

# 2006/09/06	kyoshida

#             Eurus‚Ì—L–³ŒŸo‘Î‰ž

# 2006/10/10	kyoshida

#             RSSI’l‚Ì‹KŠi‚ð

#            u’²®ŒŸ¸—v€F06.10.05v‚Ö‡‚í‚¹‚éB

###############################################

#=== ‹¤’ÊÝ’è =================================

#

# Œv‘ªƒ‚[ƒhÝ’è

#

#   0 = ’Êíƒ‰ƒCƒ“ŒŸ¸

#   1 = ƒfƒoƒbƒN Œv‘ªŒJ‚è•Ô‚µ

#----------------------------------------------

0

#=== ‹¤’ÊÝ’è =================================

#

# RSSI‚ª‹KŠi“à‚Ìê‡‚ÉAshutdown‚ðŽÀs‚·‚é‚©H‚ÌÝ’è

#

#   0 = shutdown ‚µ‚È‚¢B

#   1 = shutdown ‚·‚éB

#----------------------------------------------

1

#=== ‹¤’ÊÝ’è =================================

#

# ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦

#

# RSSI‚ª‹KŠi“à(-OK-)‚Ìê‡‚És‚¤LED§Œä

#

# LED ID

#

#   1 = POWER(green)

#   2 = STATUS(red)

#

# LED ACTION

#

#   0 = OFF

#   1 = ON

#   2 = BLINK FAST

#   3 = BLINK SLOW

#----------------------------------------------

#<1>------

# LED ID

1

# LED ACTION

1

#<2>------

# LED ID

2

# LED ACTION

0

#=== ‹¤’ÊÝ’è =================================

#

# ¦shutdown = 00 ‚Ìê‡‚É‚Ì‚Ý—LŒø¦

#

# RSSI‚ª‹KŠiŠO(-NG-)‚Ìê‡‚És‚¤LED§Œä

#

# LED ID

#

#   1 = POWER(green)

#   2 = STATUS(red)

#

# LED ACTION

#

#   0 = OFF

#   1 = ON

#   2 = BLINK FAST

#   3 = BLINK SLOW

#----------------------------------------------

#<1>------

# LED ID

1

# LED ACTION

2

#<2>------

# LED ID

2

# LED ACTION

0

#=== WLANÝ’è =================================

#

# <10i“ü—Í>

#

# RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

#

#   0 = ‘ª’è‚µ‚È‚¢B

#   1 = ‘ª’è‚·‚éB

#   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB

#

# RSSI‚Ì‹KŠi

#

#   min[dBm]

#   max[dBm]

#

# OK count

# NG count

#

# ‘ª’èŽüŠú‚Ì–ÚˆÀ

#   [‘ª’èƒ`ƒƒƒ“ƒlƒ‹”] ~ 100msec

#----------------------------------------------

# <ANTENNA A>

0

-80

-20

2

200

# <ANTENNA B>

0

-80

-20

2

200

# <ANTENNA DIVERSITY>

0

-80

-20

2

200

#=== WLANÝ’è =================================

#

# <10i“ü—Í>

#

# RSSI‘ª’è‚ðs‚¤ƒ`ƒƒƒ“ƒlƒ‹‚ÌÝ’è

# 1 - 13ŒÂ‚ðŽw’è

#

#   channel < 14 = ‘ª’è‚·‚éB

#   channel > 13 = ‘ª’è‚µ‚È‚¢B(255ˆÈ‰º)

#

#----------------------------------------------

# 1 - 13ch ‘S‚Ä‘ª’è‚·‚éê‡

1

2

3

4

5

6

7

8

9

10

11

12

13

###############################################

# samples

# 1 ‚Æ 13ch ‚¾‚¯‘ª’è‚·‚éê‡

##############################################

#1

#13

#77

#77

#77

#77

#77

#77

#77

#77

#77

#77

#77

#END-samples----------------------------------

#=== APÚ‘±ŒŸ¸ŠÖŒW‚ÌÝ’è ====================

#

# RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

#

#   0 = ‘ª’è‚µ‚È‚¢B

#   1 = ‘ª’è‚·‚éB

#   2 = HW config‚ÅEurus—L‚è‚Ìê‡‚Ì‚Ý‘ª’è‚·‚éB

#

# OK count

# NG count

#

# Ú‘±Šm”FŽüŠú‚Ì–ÚˆÀ

#   100msec

#

# <AP>

#   SSID

#   IP ADDRESS

#

# <COOKIE>

#   IP ADDRESS

#   NETMASK

#   DEFAULT ROUTE

#   PRIMARY DNS

#

#----------------------------------------------

0

10

300

#<AP>

LV2DIAG-AP

192.168.1.1

#<COOKIE>

192.168.1.100

255.255.255.0

192.168.1.1

192.168.1.1

#=== BTÝ’è =================================

#

# <10i“ü—Í>

#

# RSSI‘ª’è‚ðs‚¤‚©H‚ÌÝ’è

#

#   0 = ‘ª’è‚µ‚È‚¢B

#   1 = ‘ª’è‚·‚éB

#

# RSSI‚Ì‹KŠi

#

#   min[dBm]

#   max[dBm]

#

# OK count

# NG count

#

# ‘ª’èŽüŠú‚Ì–ÚˆÀ

#   100msec

#----------------------------------------------

# <ANTENNA 1>

0

-60

-1

2

300

# <ANTENNA 2>

0

-60

-1

2

30

# <ANTENNA DIVERSITY>

0

-60

-1

2

30

#=== CS Only ================================

#

#ƒRƒ“ƒgƒ[ƒ‰[‚ð‚Í‚¸‚·‚Æ‚«‚ÌLED“_“”ƒpƒ^[ƒ“

#

# LED ID

#

#   1 = POWER(green)

#   2 = STATUS(red)

#

# LED ACTION

#

#   0 = OFF

#   1 = ON

#   2 = BLINK FAST

#   3 = BLINK SLOW

#--------------------------------------------

#<1>------

# LED ID

1

# LED ACTION

2

#<2>------

# LED ID

2

# LED ACTION

0

###############################################

#=== ‚»‚Ì‘¼€–Ú‚ÌŽÀs‚Ì—L–³ ===================

# WLAN,BTŒŸ¸‚ÌŒã‚ÉŽÀs‚³‚ê‚é 

#----------------------------------------------

# Drive Init

#   0 = ŽÀs‚µ‚È‚¢

#   1 = ŽÀs‚·‚é

#----------------------------------------------

1

#---------------------------------------------

# Install Systemsoftware

#   0 = ŽÀs‚µ‚È‚¢

#   1 = ŽÀs‚·‚é

#----------------------------------------------

1

#---------------------------------------------

# freebdp

#   0 = ŽÀs‚µ‚È‚¢

#   1 = ŽÀs‚·‚é

#----------------------------------------------

0

#---------------------------------------------

# Install Systemsoftware ‚ÅŽg—p‚·‚éUpdater–¼

#----------------------------------------------

manufacturing_updater_for_reset.self

I hope the tutorial will be helpful to those who have trouble making its downgrade and remarried.
Regards.

You must login or register to view this content.

09-14-2011, 07:39 PM #59

xMo

League Champion

1,601

Posts

5,996

Reputation

4

Credits

Premium

Oct 2010

NextGenUpdate

Originally posted by MrJesseMoDz

Maybe Your Mum can do That:megusta:

u can downgrade from 3.70 2 3.55 still!

09-15-2011, 07:55 AM #60

-SuBZeRo-

Banned

133

Posts

125

Reputation

0

Credits

Banned

Dec 2008

NextGenUpdate

Originally posted by SuBZeRo

Need some help, im in factory/service mode, i managed to downgrade from 3.55 to 3.41 spoofed to 3.56, when i swap the ps3updat.pup to the 3.15 and boot with the mem stick in, the ps3 goes straight to the xmb in system settings it says im on 3.41 not sure if its meant to though as you stated its 3.41 spoofed to 3.56, so wouldnt it say 3.56 ? :\
So all in all im on 3.41 and it wont let me downgrade to 3.15.

Can anyone help me ? i ran a minimum version check on my system and i can go to 1.90 or higher so i dont see why i cant downgrade from this 3.41 spoofed to 3.56 to 3.15 :\

EDIT: I think i got it to work now by holding the power button to turn it on then keep holding untill the first beep :\ i'll reply with how it goes Happy

To get it to work i had to hold down the power button so the system starts to boot then shuts off, then hold the power button untill the first beep and it does the downgrade process

also great tutorial i have now remarried my drive Happy

thanks

09-15-2011, 05:22 PM #61

ps3nemesis

Haxor!

30

Posts

-20

Reputation

0

Credits

Member

Apr 2011

NextGenUpdate

this just goes to show the down right stupidity of the noobs on this site and all the others.

1. the jig-stick files required to put ps3 into factory service mode are not posted in the thread.
2. there are a number of different the lv2diag files floating around all different sizes for different tasks.
3. if you have a ps3- fat origonal with 256Mb you will need to downgrade from say 3.55 ->3.41(special spoofed pup ) then again to 2.30 OSFW. then once remarried then upgrade to CFW3.55 or whatever.

I HAVE PUT TO GETHER MY OWN AND EASY TO FOLLOW GUIDE AND WILL POST ASAP

09-17-2011, 12:47 PM #62

Holleeder

Satadurah

158

Posts

138

Reputation

0

Credits

Premium

Sep 2011

NextGenUpdate

Originally posted by xMo

u can downgrade from 3.70 2 3.55 still!

I Know . with E3 Flasher, or Progskeet and Teensy++

09-24-2011, 02:58 AM #63

lukelovings

Keeper

15

Posts

10

Reputation

0

Credits

Member

Jan 2011

NextGenUpdate

Ok, let me just start by saying I followed this guide with a CECHG01 w/ faulty board and managed to successfully remarry a board from a CECHE01.

When it was like "check your system setting to see if its on the right version... blahblah" My screen was BLACK THE ENTIRE TIME. but i just kept following the steps, then the video came back as soon as the drive Init started! Woot! Now it's on 2.30 with a WORKING bluray drive! Time to sell it on ebay! Hell yea!

10-03-2011, 09:22 AM #64

Nosolam

Save Point

7

Posts

10

Reputation

0

Credits

Member

Sep 2011

NextGenUpdate

this is super sweet