Post: How to fix RSOD due to Rebug Spoofer
Options
05-30-2012, 07:45 PM
#1
ICS Vortex
Between Light and Lies
Requirements:
USB with 800 MB free space
3.55 PS3 already
[multipage=The Fast Way]
Another way to fix this mentioned by a slew of people is to restore your system through recovery menu with the original 3.55 update, and then install your custom firmware again. I haven't verified this way, so do this at your own risk.
[multipage=My Way]
Warning: You may have a chance of a perma brick using this method
First of all, you need to download these files:
RSOD Fix.pkg
You must login or register to view this content.
NORSOD patched PUP
You must login or register to view this content.
Now put the .PKG file onto the root of your USB like any other package file.
Once you've done that go to the root of your USB and make this: PS3 > UPDATE
Inside of the UPDATE folder you put the UPDAT.PUP
Go to your PS3 and hold down the power button. It will do a few beeps and then turn off, once it does that hold it down again until you hear 2 beeps in a row. Once you do that you let go of the power button. You're now in Recovery Mode.
From Recovery Mode, you scroll down to the last option: Update. MAKE SURE YOU DON'T HAVE ANY DISCS IN YOUR PS3 WHEN YOU DO THIS. Choose Update, and press select and start at the same time. It should recognize your USB with the update on it etc. Update it with that.
Once the update is finished, install the .PKG file. Then run it from the XMB.
Now, you are completely unbricked/red screened. All you have to do now is get the CFW you want to put back on it, and replace the UPDAT.PUP inside of your USB and update it through media device.
I hope this helped you guys, and if you have any questions feel free to ask. I do not take credit for these files, or the tutorial. I just wanted to share my find with you guys.
[multipage=The Safe Way]
You must login or register to view this content.
Place this Lv2diag.self in the root of an empty USB flash dongle, and use any method to toggle Factory Service Mode (FSM)
1.)Copy the .self (in the download) to the root of a USB flash drive.
2.)Rename the file to Lv2diag.self.
3.)Place the flash drive in the right most USB port.
4.)Toggle FSM.
5.)Boot PS3
6.) During FSM boot, the Lv2diag.self will execute.
If you hear a single beep and your PS3 returns to XMB it was successful (obviously)
If you will hear one or more beeps, and the playstation3 will shutdown. If you experience a failure, its likely due to your FLASH being corrupt beyond repair or a hardware problem.
Method by: PS3 Prodigy
The following 19 users say thank you to ICS Vortex for this useful post:
06-28-2012, 06:55 AM
#38
ICS Vortex
Between Light and Lies
06-29-2012, 09:15 PM
#42
ICS Vortex
Between Light and Lies
Originally posted by Hxrry
wow, i did this and fixed it. next day it got YLOD :fa:
Damn that sucks man. I don't have any way to fix that though :/
---------- Post added at 05:15 PM ---------- Previous post was at 05:14 PM ----------
Originally posted by kalden746
i Followed your steps. but after the update my ps3 didn't boot up. and it was YOLD, any there any way you can help me from this?
I can't fix a YLOD :/
YLOD is caused by overheating/disconnection from a solder.
07-04-2012, 01:47 AM
#46
HelpmeplzPLZ
Brute
Originally posted by ForeverDamned
Hello all, I've decided to make this tutorial as I've known 6 people that bricked their PS3 due to the 4.11 Rebug Spoofer recently released.
Requirements:
USB with 800 MB free space
3.55 PS3 already
[multipage=The Fast Way]
Another way to fix this mentioned by a slew of people is to restore your system through recovery menu with the original 3.55 update, and then install your custom firmware again. I haven't verified this way, so do this at your own risk.
[multipage=My Way]
Warning: You may have a chance of a perma brick using this method
First of all, you need to download these files:
RSOD Fix.pkg
You must login or register to view this content.
NORSOD patched PUP
You must login or register to view this content.
Now put the .PKG file onto the root of your USB like any other package file.
Once you've done that go to the root of your USB and make this: PS3 > UPDATE
Inside of the UPDATE folder you put the UPDAT.PUP
Go to your PS3 and hold down the power button. It will do a few beeps and then turn off, once it does that hold it down again until you hear 2 beeps in a row. Once you do that you let go of the power button. You're now in Recovery Mode.
From Recovery Mode, you scroll down to the last option: Update. MAKE SURE YOU DON'T HAVE ANY DISCS IN YOUR PS3 WHEN YOU DO THIS. Choose Update, and press select and start at the same time. It should recognize your USB with the update on it etc. Update it with that.
Once the update is finished, install the .PKG file. Then run it from the XMB.
Now, you are completely unbricked/red screened. All you have to do now is get the CFW you want to put back on it, and replace the UPDAT.PUP inside of your USB and update it through media device.
I hope this helped you guys, and if you have any questions feel free to ask. I do not take credit for these files, or the tutorial. I just wanted to share my find with you guys.
[multipage=The Safe Way]
You must login or register to view this content.
Place this Lv2diag.self in the root of an empty USB flash dongle, and use any method to toggle Factory Service Mode (FSM)
1.)Copy the .self (in the download) to the root of a USB flash drive.
2.)Rename the file to Lv2diag.self.
3.)Place the flash drive in the right most USB port.
4.)Toggle FSM.
5.)Boot PS3
6.) During FSM boot, the Lv2diag.self will execute.
If you hear a single beep and your PS3 returns to XMB it was successful (obviously)
If you will hear one or more beeps, and the playstation3 will shutdown. If you experience a failure, its likely due to your FLASH being corrupt beyond repair or a hardware problem.
Method by: PS3 Prodigy
Requirements:
USB with 800 MB free space
3.55 PS3 already
[multipage=The Fast Way]
Another way to fix this mentioned by a slew of people is to restore your system through recovery menu with the original 3.55 update, and then install your custom firmware again. I haven't verified this way, so do this at your own risk.
[multipage=My Way]
Warning: You may have a chance of a perma brick using this method
First of all, you need to download these files:
RSOD Fix.pkg
You must login or register to view this content.
NORSOD patched PUP
You must login or register to view this content.
Now put the .PKG file onto the root of your USB like any other package file.
Once you've done that go to the root of your USB and make this: PS3 > UPDATE
Inside of the UPDATE folder you put the UPDAT.PUP
Go to your PS3 and hold down the power button. It will do a few beeps and then turn off, once it does that hold it down again until you hear 2 beeps in a row. Once you do that you let go of the power button. You're now in Recovery Mode.
From Recovery Mode, you scroll down to the last option: Update. MAKE SURE YOU DON'T HAVE ANY DISCS IN YOUR PS3 WHEN YOU DO THIS. Choose Update, and press select and start at the same time. It should recognize your USB with the update on it etc. Update it with that.
Once the update is finished, install the .PKG file. Then run it from the XMB.
Now, you are completely unbricked/red screened. All you have to do now is get the CFW you want to put back on it, and replace the UPDAT.PUP inside of your USB and update it through media device.
I hope this helped you guys, and if you have any questions feel free to ask. I do not take credit for these files, or the tutorial. I just wanted to share my find with you guys.
[multipage=The Safe Way]
You must login or register to view this content.
Place this Lv2diag.self in the root of an empty USB flash dongle, and use any method to toggle Factory Service Mode (FSM)
1.)Copy the .self (in the download) to the root of a USB flash drive.
2.)Rename the file to Lv2diag.self.
3.)Place the flash drive in the right most USB port.
4.)Toggle FSM.
5.)Boot PS3
6.) During FSM boot, the Lv2diag.self will execute.
If you hear a single beep and your PS3 returns to XMB it was successful (obviously)
If you will hear one or more beeps, and the playstation3 will shutdown. If you experience a failure, its likely due to your FLASH being corrupt beyond repair or a hardware problem.
Method by: PS3 Prodigy
Hi man I tried your methods but the PS3 won't recognize ANY update !
I got 3.55 Rebug CFW and entered 4.20 spoof but then later I switched XMB to "normal mode" and I got RSOD (not the first time , I fixed it alot) ..
But NOOWWWW ... The problem is whenever I go to Recovery menu and try to SYSTEM UPDATE , It keep saying "No applicable update data was found"
When I got RSOD my PS3 was on 4.20 Spoofed .. I've tried literally everything , Installing OFW , KMEAW , REBUG , Putting right folders in USB , Formatted FAT32.
Do you know how to fix this? Atleast do any of you have a link for maybe a WORKING OFW .. Maybe that's the problem for me , I don't know ! please help me !
Thanks for taking your time reading this , Please reply!
I've tried : KMEAW CFW , OFW 3.55 , REBUG CFW and your NONRSOD.pup , Stupid PS3 won't recognize any of them .
Don't worry I renamed them to PS3UPDAT.PUP too but still the PS3 WONT RECOGNIZE THEM , THIS IS DRIVING ME NUTS !! :luke:
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
