Post: [Tutorial] CEX2DEX using Rebug CFW4.21
Options
11-11-2012, 11:19 PM
#1
DEREKTROTTER
You're Goddamn Right
[Tutorial] CEX2DEX using Rebug CFW4.21
Downloads:
CEX2DEX: You must login or register to view this content.
EID Root Key Dumper: You must login or register to view this content. | You must login or register to view this content. | You must login or register to view this content.
Preparation:
Dumping EID root key
First you need to dump your EID Root Key which can now be done on most CFW Version.
- Install and run the EID PKG for your CFW, the PS3 will just show a black screen and beep several times. You can now restart the PS3 and retrieve your eid_root_key from either:
/dev_hdd0/tmp/eid_root_key or for 4.xx in /dev_hdd0/game/FLTZ00010/USRDIR.
*You can now dump you EID Root Key directly via the Rebug Toolbox ( utilities > dump EID Root key )
Dumping NOR/NAND
You can do this on rebug CFW using the toolbox.
- Find the option "Export Flash to File", this will dump it to USB000 (right slot).
You must login or register to view this content.
Converting your CEX dump to DEX
- First download and extract the c2d_openssl.rar to C:/ and install openSSL, this is required for c2d to work properly. Make sure you rename the folder to "openssl".
- Now take you eid_root_key and your NOR/NAND dump and place in the folder with c2d.
- Rename your original CEX dump to flashCEX.bin
- Add .bin extension to eid_root_key.
Should now have a folder like this:
You must login or register to view this content.
- Open a CMD window in the current directory (CTRL+SHIFT + right click > Open a command window here)
Usage:
c2d.exe eid_key_file.bin in_flash.bin out_flash.bin [target_id]
So type in CMD or copy/paste the following: c2d.exe eid_root_key.bin flashCEX.bin flashDEX.bin 82
You must login or register to view this content.
Should give you an output like this:
You must login or register to view this content.
If you are unsure you have done it correctly, you can convert back to your original target ID (mine is 87)
Then compare this one with your original and they should match.
Switching to DEX using rebug CFW
Take your two dumps (flashCEX.bin + flashDEX.bin) and rename as below:
Rename your original CEX dump to CEX-FLASH.EID0.NORBIN (16mb) or CEX-FLASH.EID0.NANDBIN (239mb or 256mb)
Rename your converted DEX dump to DEX-FLASH.EID0.NORBIN (16mb) or DEX-FLASH.EID0.NANDBIN (239mb or 256mb)
Then place in the directory of your USB storage drive and insert in PS3 on USB000 (right slot)
Load up Rebug Toolbox and first click the option:
You must login or register to view this content.
A couple of warning boxes pop up, click YES to both.
Now Swap LV2 kernal, reboot and you are in DEX Mode within 10 seconds
You must login or register to view this content.
Switching back to CEX
Very easy, simply rewrite target ID and it will auto swap lv2 kernal to CEX.
To access PSN in DEX mode, there is a feature in Rebug Toolbox to spoof IDPS. Choose EID5 and you will be able to sign in fine.
btw, if anything in this tut doesn't make sense - let me know so i can make it even more noob friendly.
Troubleshooting
Q: Command prompt says cant find openssl.exe in c: \openssl\bin even though i checked and openssl.exe is definately there.
A: Make sure the openssl folder is at root C:/ and is named exactly "openssl"
Q: Im having a error telling me that wrong format EID 48 bytes.
A: Make sure the filesize of your key is either 48 bytes (NOR) or 256kb (NAND)
Also dont forget you need to add the file extension .bin to the key.
How to get Online 4.21 DEX
Simply go to Rebug Toolbox > Utilities > Change Active PS3ID > EID5 CEX then go Sign in.
The following 239 users say thank you to DEREKTROTTER for this useful post:
_L0st_my_Gh0st_, ResistTheMoon, -SuperMan, {OM}1337{OM}, ⓙω мσ∂z, Nana, ★RAMPAGE★, Eddie Mac, 1reyalp, A Friend, A1narchy.com, AcnxMods, alexis strider, AlexNGU, Asian, bandphan, BASEBALL4EVER12, bhoot-iq, TheDeadLift, BKG98, BkxRich, BoatyMcBoatFace, Britis-, BroIDontMod, byVexHD, canadiancaper, CantStopMark, celahudini, Cesei, CEXREXDEX, Chnorzy, CITYCOMET, cl_21, clossky, codmadz332, Creepz, cuartaesfera, Dan Dactyl, Dan94, DannyBoiSmith, Daweeyz, Demmonnixx, dolby1, Dr. Mayham, Durnethe3, emcrew2, EquakeCSharp, FarSideX, 
Luckeyy, FLIX_Hosting, flynhigh09, FOX-727, Frank Ryan, FwiskyFIFA, gaming_nation, popcornmods, GangDePlot, gatecrasher, geeklogik, Geo, Ali D Killer, Ghozt007, Gommy, GuMMyOreOs, Harry, Hate, HaTeRM4NR33T, Heaney, JLM, hibye3, HighModzz, Hori_By_Nature, I-HATE-NGU, ibombo, Callumeleyy, iDunkPingazBrah, iifire, ilasthope, iLLy-i, Im Po, ImAzazel, ImGsus, ImIrIsH, ImPiffHD, iRoyal // MoDz, Island Time, It's Kevin, JakeP0500, JamesSwagger, Jasdeep, Jimmy, JohanMoya, joni_djESP, JPClyde, juham, kazeFATALITY, Kearns- and 139 other users.
Luckeyy, FLIX_Hosting, flynhigh09, FOX-727, Frank Ryan, FwiskyFIFA, gaming_nation, popcornmods, GangDePlot, gatecrasher, geeklogik, Geo, Ali D Killer, Ghozt007, Gommy, GuMMyOreOs, Harry, Hate, HaTeRM4NR33T, Heaney, JLM, hibye3, HighModzz, Hori_By_Nature, I-HATE-NGU, ibombo, Callumeleyy, iDunkPingazBrah, iifire, ilasthope, iLLy-i, Im Po, ImAzazel, ImGsus, ImIrIsH, ImPiffHD, iRoyal // MoDz, Island Time, It's Kevin, JakeP0500, JamesSwagger, Jasdeep, Jimmy, JohanMoya, joni_djESP, JPClyde, juham, kazeFATALITY, Kearns- and 139 other users.
02-11-2014, 09:50 PM
#614
FarSideX
I’m too L33T
Originally posted by Claww
when i go rewrite target id in flash it then says please provide the following file and try again /dev_usb000/DEX-FLASH.EID0.NORBIN??? Please help asap???
Do you have the two files DEX-FLASH.EID0.NORBIN and CEX-FLASH.EID0.NORBIN on the root of your USB device? Is the USB device plugged into the right most USB port of your PS3? If you have a file extension of .bin on the filenames Windows by default will hide that, check with a command prompt if you are not sure.
02-19-2014, 04:18 AM
#616
TheDoctor MoDz
Do a barrel roll!
02-19-2014, 05:53 AM
#617
X-UNDEAD_NINJA2
< ^ > < ^ >
02-21-2014, 03:12 PM
#618
ilovetohack!!
Keeper
Originally posted by DEREKTROTTER
[Tutorial] CEX2DEX using Rebug CFW4.21
NOTE: Guide is almost the same for Rebug 4.30 users, simply dump your NOR/NAND on 4.30 - though this should be obvious anyway :dumb:
Downloads:
You must login or register to view this content.
You must login or register to view this content.
Preparation:
Dumping EID root key
First you need to dump your EID Root Key which must be done on 3.55 cfw(downgrade using the 999 pup if needed).
- Install and run the eEID_RKDumper.pkg, the PS3 will just show a black screen and beep several times. You can now restart the PS3 and retrieve your eid_root_key from /dev_hdd0/tmp/.
That is all you need from 3.55, you can go back to rebug 4.21.
Dumping NOR/NAND
You can do this on rebug 4.21 using the toolbox.
- Find the option "Export Flash to File", this will dump it to USB001 (right slot).
You must login or register to view this content.
Converting your CEX dump to DEX
- First download and extract the c2d_openssl.rar to C:/ and install openSSL, this is required for c2d to work properly. Make sure you rename the folder to "openssl".
- Now take you eid_root_key and your NOR/NAND dump and place in the folder with c2d.
- Rename your original CEX dump to flashCEX.bin
- Add .bin extension to eid_root_key.
Should now have a folder like this:
You must login or register to view this content.
- Open a CMD window in the current directory (CTRL+SHIFT + right click > Open a command window here)
Usage:
c2d.exe eid_key_file.bin in_flash.bin out_flash.bin [target_id]
You must login or register to view this content.
Should give you an output like this:
You must login or register to view this content.
If you are unsure you have done it correctly, you can convert back to your original target ID (mine is 87)
Then compare this one with your original and they should match.
Video
You must login or register to view this content.
Switching to DEX using rebug 4.21
Take your two dumps (flashCEX.bin + flashDEX.bin) and rename as below:
Rename your original CEX dump to CEX-FLASH.EID0.NORBIN (16mb) or CEX-FLASH.EID0.NANDBIN (239mb or 256mb)
Rename your converted DEX dump to DEX-FLASH.EID0.NORBIN (16mb) or DEX-FLASH.EID0.NANDBIN (239mb or 256mb)
Then place on USB001 (right slot)
Load up Rebug Toolbox and first click the option:
You must login or register to view this content.
A couple of warning boxes pop up, click YES to both.
Now Swap LV2 kernal, reboot and you are in DEX Mode within 10 seconds
You must login or register to view this content.
Switching back to CEX
Very easy, simply rewrite target ID and it will auto swap lv2 kernal to CEX.
To access PSN in DEX mode, there is a feature in Rebug Toolbox to spoof IDPS. Choose EID5 and you will be able to sign in fine.
btw, if anything in this tut doesn't make sense - let me know so i can make it even more noob friendly.
Troubleshooting
Q: Command prompt says cant find openssl.exe in c:\oppenssl\bin even though i checked and openssl.exe is definately there.
A: Make sure the openssl folder is at root C:/ and is named exactly "openssl"
Q: Im having a error telling me that wrong format EID 48 bytes.
A: Make sure the filesize of your key is either 48 bytes (NOR) or 256kb (NAND)
Also dont forget you need to add the file extension .bin to the key.
How to get Online 4.21 DEX
Simply go to Rebug Toolbox > Utilities > Change Active PS3ID > EID5 CEX then go Sign in.
Enjoy your debug [img]https://www.**************/images/smilies/sFi_hitman.gif[/img]
hi Mr derek..i followed every step of ur guide and its very helpful
....but i have a problem and cant solve it 
i got my eid_root_key from 3.55 cfw and also renamed it to "eid_root_key.bin" then i updated my ps3 to 4.21 rebug and used rebug tool v2.01.05 and got my flash of CEX,,,and renamed it to "flashCEX.bin" but when i run command prompt and entered every thing as u did..but in the end when i write 82 nothing happens and when i hit enter it gives me this error "ERROR: input flash file is not valid!" what should i do :/thanks in advance
03-03-2014, 08:46 PM
#621
codmadz332
Pokemon Trainer
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
