(adsbygoogle = window.adsbygoogle || []).push({}); I don't take any credit for this guide, at all...I didn't write a single word of it!!!

I feel like this is valuable info, though, and it needs to be spread around since word has spread that a lot of people are bricking (even though it's not as big of a problem as people are making it out to be lol)

so...here you go...how to unbrick from DEX->CEX conversion. If you do brick in the process going back, don't worry...it's a REALLY, REALLY, REALLY simple process

When it happens?
When doing a DEX to CEX conversion, when you're in 3.55 DEX firmware after flashing the CEX EID0.NORBIN in Multiman CEX, you shutdown the ps3 and the PS3 won't boot anymore.
This problem is related to CEX CFW syscon hashes. Follow this tutorial if you want to prevent the brick from happen

i will update the thread with what you can fix bricks with


Brick sign
On boot, the ps3 console, after 5 "double beeps" very fast and turn off after 3 seconds - no video output
See an example:




Preparation
- USB Dongle with the payload to go to factory mode (ex: E3 Card Reader)
- USB Pen formated as FAT32 (help if it have led status to check if its working and ps3 is doing his stuff)
- 3.55 CEX Firmware PUP with prepatched lv1 (no syscon hash checks) (i used rogero v3.4 cex cfw)


Notes:
- Use always the right USB port (next to BD/power button/eject button) for the USB Dongle and the USB PEN
- You will not have video output until step 10


On the computer
1. Format USB PEN and put lv2diag.self file 1

You must login or register to view this content.

the one that is green, also put PS3UPDAT.PUP in the root of the PEN (the 2 files must be in the root of the USB PEN)


On the PS3
2. Switch off ps3 from power cord
3. Put the USB Dongle with service mode payload in the right usb port
4. Put power cord in the console
5. Press power button followed quickly with eject button, the console should boot, and then reboot. (if the beeps continue it's normal)
6. Remove service dongle
7. Put the USB Pen with the 2 files inside in the right usb port
8. Power on the PS3. If all went well you shall see the ps3 reading stuff in the usb pen, and the hard drive of ps3 working, wait for the console to power off.
9. Remove the USB PEN (you will have an UPDATER_LOG.TXT in the Pen with the details)
10. Power on the PS3
11. At this point you can check if the console boot up and its inside factory mode (red square box in the bottom left of the screen)
12. Power off the PS3


On the computer
13. All you need now is to get out of Factory Mode, so put lv2diag.self file 2 in a FAT32 blank USB Pen


On the PS3
14. Put the USB Pen in the right port with the file already on it
15. Power on (the console will power off automatically)
16. Power again and should be ok

Bro Myh ps3 is DEX --> CEX bricked, but it won't go into fsm. I tried with ps3jig.

PS3ita 4.21 DEX

You must login or register to view this content.

---------- Post added at 05:30 AM ---------- Previous post was at 05:29 AM ----------





You must login or register to view this content.

---------- Post added at 05:30 AM ---------- Previous post was at 05:30 AM ----------



You must login or register to view this content.

hello i saw ur unbricking thread so i wanted to ask you if the dongle works for this brick bcause i dont want to buy it for nothing thanks please reply fast.

thanksssssssssssssssssssssssssssssssssssssssss

does this work for a brick ps3 with 4.46 super slim 4k

Hey yea so i bought my e3 card reader and fixed it. The i left for vacation and seen that it bricked again, my cusin wanted to data transfer But switch to CEX before. Basicly my ps3 bricked again and now it wont fix.

Am i soposto flash or dump anything?
Or Is it diffrent files i need?

Can anyone help me?
Skype: iHc-XD
Reward 5$ or 1million vbux