Post: Rogero CEX 4.46 v1.00
Options
07-17-2013, 11:09 PM
#1
SC58
Former Staff
ReactPSN patch to work offline without the need to log into PSN at all.
noBD/noBT patches to allow installation on consoles with broken BluRay Drive or Bluetooth board.
This CFW can be installed fine from XMB Update over OFW3.55 or any CFW ver <= 3.41/3.55/4.21/4.30/4.40/4.41/4.46
HDD can be swapped/changed and the CFW will re-install without any problem.
Patched LV1 to disable LV2 Protection.
Patched LV1 to add peek/poke support.
Patched LV1 Core OS Hash Check (to prevent Bricking on non-dehashed downgraded consoles)
Patched LV2 to add peek/poke support.
QA Flag enabled by default to allow for easier downgrading using Recovery Menu.
RSOD screen bypass patch for RSOD machines (it won't fix the RSOD but allows the PS3 to boot fine into XMB)
PSN/SEN access is available but it's not recommended.
It can run games signed with Keys up to version 4.46 without any Eboot/Sprx patching needed.
The CFW can be used for Downgrading with Hardware flashers with PS3 Flash Auto Patcher v4.46
This CFW was tested on most PS3 Models by different testers and no problems were encountered. But as any CFW release you must install it with caution and by following proper instructions, No one will be held responsible for any damage caused.
Download link - You must login or register to view this content.
MD5: 346b183f615a38020d398df005899065
Size: 193 MB (203,336,242 bytes)
Source: You must login or register to view this content.
The following 9 users say thank you to SC58 for this useful post:
07-17-2013, 11:20 PM
#2
Ice-cold-killa7
Haxor!
Anyone recommend using a cfw by rogero? Thinking about doing it but not sure if I should wait for rebug to come out with one instead
07-18-2013, 01:02 AM
#5
Savage_847
Vault dweller
Originally posted by SC58
You must login or register to view this content.
Rogero CFW4.46 v1.00
ReactPSN patch to work offline without the need to log into PSN at all.
noBD/noBT patches to allow installation on consoles with broken BluRay Drive or Bluetooth board.
This CFW can be installed fine from XMB Update over OFW3.55 or any CFW ver <= 3.41/3.55/4.21/4.30/4.40/4.41/4.46
HDD can be swapped/changed and the CFW will re-install without any problem.
Patched LV1 to disable LV2 Protection.
Patched LV1 to add peek/poke support.
Patched LV1 Core OS Hash Check (to prevent Bricking on non-dehashed downgraded consoles)
Patched LV2 to add peek/poke support.
QA Flag enabled by default to allow for easier downgrading using Recovery Menu.
RSOD screen bypass patch for RSOD machines (it won't fix the RSOD but allows the PS3 to boot fine into XMB)
PSN/SEN access is available but it's not recommended.
It can run games signed with Keys up to version 4.46 without any Eboot/Sprx patching needed.
The CFW can be used for Downgrading with Hardware flashers with PS3 Flash Auto Patcher v4.46
This CFW was tested on most PS3 Models by different testers and no problems were encountered. But as any CFW release you must install it with caution and by following proper instructions, No one will be held responsible for any damage caused.
Download link - You must login or register to view this content.
You must login or register to view this content.
MD5: 346b183f615a38020d398df005899065
Size: 193 MB (203,336,242 bytes)
Source: You must login or register to view this content.
Rogero CFW4.46 v1.00
ReactPSN patch to work offline without the need to log into PSN at all.
noBD/noBT patches to allow installation on consoles with broken BluRay Drive or Bluetooth board.
This CFW can be installed fine from XMB Update over OFW3.55 or any CFW ver <= 3.41/3.55/4.21/4.30/4.40/4.41/4.46
HDD can be swapped/changed and the CFW will re-install without any problem.
Patched LV1 to disable LV2 Protection.
Patched LV1 to add peek/poke support.
Patched LV1 Core OS Hash Check (to prevent Bricking on non-dehashed downgraded consoles)
Patched LV2 to add peek/poke support.
QA Flag enabled by default to allow for easier downgrading using Recovery Menu.
RSOD screen bypass patch for RSOD machines (it won't fix the RSOD but allows the PS3 to boot fine into XMB)
PSN/SEN access is available but it's not recommended.
It can run games signed with Keys up to version 4.46 without any Eboot/Sprx patching needed.
The CFW can be used for Downgrading with Hardware flashers with PS3 Flash Auto Patcher v4.46
This CFW was tested on most PS3 Models by different testers and no problems were encountered. But as any CFW release you must install it with caution and by following proper instructions, No one will be held responsible for any damage caused.
Download link - You must login or register to view this content.
You must login or register to view this content.
MD5: 346b183f615a38020d398df005899065
Size: 193 MB (203,336,242 bytes)
Source: You must login or register to view this content.
how do you downgrade from 4.46 rogero to 3.55
07-18-2013, 01:48 AM
#7
Savage_847
Vault dweller
Originally posted by SC58
rebug 9.99 downgrader or rogero downgrader works
ohh cause i installed 4.41.2 lite rebug and i try to downgrade and i get error on the 9.99 downgrader and 4.25 to 3.55, so then i updated to 4.46 rogero cause i couldent downgrade and i tryed to downgrade it again and says error with his 4.25 to 3.55 downgrader
07-18-2013, 05:54 AM
#9
prototype123
Banned
Originally posted by SC58
rebug 4.41 rex shoudl be here like week or 2, i prob wait if u like rebug cfw better
Yo bro why is the Rebug team going to make a 4.41 Rex edtion and not a 4.46 Rex edtion that is kinda if weired...?
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
