Post: PS3 4.70 Spoof for HABIB Cobra
Options
02-24-2015, 03:53 AM
#1
LucidPerceptions
Pokemon Trainer
DISABLE ANY OTHER SPOOFER BEFORE STARTING. BASICALLY, REVERT BACK TO NON-SPOOFED MODE.
So as you guys can tell, Sony just released OFW 4.70. Since most spoofers for non-cobra users are useless right now, it still works for people using COBRA CFW.
PSNPatch 4.66.3 by KW EDITED TO 0470 SPOOF using the one from brewology: You must login or register to view this content.
Install the PKG file that comes with the download and install on ps3.
Run the pkg on your ps3. With a USB connected to ps3.
Replace the PSNPATCH.cfg file on the root of USB with the one in the download (running PSN patch for the first time creates one on your usb)
Go onto PSNPATCH and at the bottom it should say cobratoolbox open that and there should be an option to spoof to 4.70.
Spoof it, ps3 will restart. Check your system software, it should say 4.70
Go back to PSN Patch and press X to disable syscalls, etc
And now go online.
This method is meant to get you online, not all games will work.
Originally posted by iTzHaZeMoDzZ
Download Lucid's files both the cfg and pkg he posted on here and put it on your usb, after that plug it in your ps3 right slot ofcourse and then install psnpatch, then start psnpatch press select should say cobra options or toolbox and then press triangle it should say are you sure and press start. works on habib 4.66 cobra
Originally posted by playerkp420
Doesn't anyone read the readme.txt that comes with PSNPatch? It is not brain surgery, only file surgery. You must login or register to view this content.
If it doesn't work, make sure first you are on a Cobra CFW. Also make sure Cobra is enabled. Make sure to be on the latest version 4.66.33. Get it at store.brewology.com.
Also, instead of using the psnpatch.cfg, you can edit the default.cfg with notepad++. Located at /dev_hdd0/game/BLJS10018/USRDIR/default.cfg
P.S. Anyone got a link to OFW 4.70 .PUP file? So I can try and my Playerkp420 4.70 v1.00 CFW/MFW.
If it doesn't work, make sure first you are on a Cobra CFW. Also make sure Cobra is enabled. Make sure to be on the latest version 4.66.33. Get it at store.brewology.com.
Also, instead of using the psnpatch.cfg, you can edit the default.cfg with notepad++. Located at /dev_hdd0/game/BLJS10018/USRDIR/default.cfg
P.S. Anyone got a link to OFW 4.70 .PUP file? So I can try and my Playerkp420 4.70 v1.00 CFW/MFW.
Originally posted by iTzHaZeMoDzZ
If it doesnt say 4.70 and it says 4.66 try this go to multiman "/dev_hdd0/game/BLJS10018/USRDIR/psnpatch.cfg" and delete the one thats there and paste the one you download from lucid there and it should most likely work
Originally posted by Riften
btw for people using multiman and having problems launching games, why dont u use, idk WEBMAN lmao, you're on cobra, you can launch games from the xmb.
I can play all my Edat, ReactPSN Type Games. IDK about Backups, someone needs to confirm that.
DO THIS AT YOUR OWN RISK!
USE A VALID CID AND PSID!
**There is always a possiblity of ban on CFW** You are warned!!
The following 29 users say thank you to LucidPerceptions for this useful post:
0zersub, 3baady, AlexNGU, AustinMods-, BaSs_HaXoR, canadiancaper, Crazy_Hacker, Fantasy Gam3r, GelsonSilva, HeLLrIdEr1982, illusion_time, iTzDavid39, iTzHaZeMoDzZ, JoellekeB, KeyWest2014, KwTSnipeRxHDx, Lovednsui2, Mcmxvz_Kiitty, MoDz4Gaming, OgKillaBee187, playerkp420, policedu, salarjoker, salvia420, Synergy, UGz-, Vondy Supreme, xXx-M83-xXx
The following 3 users groaned at LucidPerceptions for this awful post:
02-24-2015, 05:01 PM
#510
awesomemember
Grunt
02-24-2015, 05:14 PM
#512
dbPS3modservice
Gobble
02-24-2015, 05:14 PM
#513
davetheshrew
Keeper
02-24-2015, 05:19 PM
#514
Gbob2014
Little One
Hey guys try this method. I got it from here You must login or register to view this content. But i just reworded it better to understand.
On PC:
1- Download YAB 1.8 (You must login or register to view this content.) and extract it to desktop or anywhere .
2-Open That Folder and run YABStart, it will open and show a couple of commands, then it will close on it's own. This is fine.
3-Now open up CMD and type "Ipconfig". You should see your network settings (IP, Gateway Etc.) Take note of the IP for your Active network (Wireless or Lan) It should be the IPv4 in most cases. EX. 192.168.x.xx, and close out of CMD.
On PS3:
1- Go To Setting and Internet Connection Settings >Custom>Choose either Wired Connection or Wireless>Choose your network connection>IP Address Setting Automatic >
HCP Do Not Set >NS Setting Automatic >MTU Automatic >Proxy Server Use 
ut in the IP Address of your Active Connection IP in Address and use 27 in Port No. you can change it if you want in Config.>UPnP Enable >now Press X to save the Setting and test the Connection.
This worked great for me on 4.66 darknet and should work for you too
On PC:
1- Download YAB 1.8 (You must login or register to view this content.) and extract it to desktop or anywhere .
2-Open That Folder and run YABStart, it will open and show a couple of commands, then it will close on it's own. This is fine.
3-Now open up CMD and type "Ipconfig". You should see your network settings (IP, Gateway Etc.) Take note of the IP for your Active network (Wireless or Lan) It should be the IPv4 in most cases. EX. 192.168.x.xx, and close out of CMD.
On PS3:
1- Go To Setting and Internet Connection Settings >Custom>Choose either Wired Connection or Wireless>Choose your network connection>IP Address Setting Automatic >
HCP Do Not Set >NS Setting Automatic >MTU Automatic >Proxy Server Use ut in the IP Address of your Active Connection IP in Address and use 27 in Port No. you can change it if you want in Config.>UPnP Enable >now Press X to save the Setting and test the Connection.This worked great for me on 4.66 darknet and should work for you too
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
