Post: Is anybody elses ps3 working?
Options
04-26-2011, 06:33 PM
#1
Blue-_-Stu
Pokemon Trainer
P.S Im in the UK
04-26-2011, 07:06 PM
#5
MiLkY1210
Brute
Originally posted by Stu
My ps3 screen is just black but i can hear the sound , they could be updating !
P.S Im in the UK
P.S Im in the UK
How have you connected your Ps3 to your tv?? you may have accidently changed your settings, if so, use the standard red, white and yellow leads, turn off your Ps3 and when you turn it on again hold down the power button until you hear a second beep, then release. You should regain your picture again and you can set up your display to how you had it before.
04-26-2011, 07:13 PM
#6
x_Mercenary--
Climbing up the ladder
Ive had this multiply times already what you do, install the ps3 how u always did it, with the cables etc. after u done that u reset your ps3.
How to do that ;
1) Place the PS3 in standby mode. That's when it shows the red light.
2) Press and hold the power button on the console for 5 seconds until you hear 2 beeps
3) Turn on your PS3, if you don't experience the problem again. Most likely the PS3 reset fixed the console.
How to do that ;
1) Place the PS3 in standby mode. That's when it shows the red light.
2) Press and hold the power button on the console for 5 seconds until you hear 2 beeps
3) Turn on your PS3, if you don't experience the problem again. Most likely the PS3 reset fixed the console.
04-26-2011, 07:23 PM
#7
MiLkY1210
Brute
Originally posted by x
Ive had this multiply times already what you do, install the ps3 how u always did it, with the cables etc. after u done that u reset your ps3.
How to do that ;
1) Place the PS3 in standby mode. That's when it shows the red light.
2) Press and hold the power button on the console for 5 seconds until you hear 2 beeps
3) Turn on your PS3, if you don't experience the problem again. Most likely the PS3 reset fixed the console.
How to do that ;
1) Place the PS3 in standby mode. That's when it shows the red light.
2) Press and hold the power button on the console for 5 seconds until you hear 2 beeps
3) Turn on your PS3, if you don't experience the problem again. Most likely the PS3 reset fixed the console.
This is correct, but for this to work, you will need to use the red, white and yellow cable as this is the default for the Ps3 and will be reset to this. Holding the power button down until you hear a second beep is correct and that second beep indicates that the changes have taken effect.
04-26-2011, 07:34 PM
#8
x_Mercenary--
Climbing up the ladder
Originally posted by MiLkY1210
This is correct, but for this to work, you will need to use the red, white and yellow cable as this is the default for the Ps3 and will be reset to this. Holding the power button down until you hear a second beep is correct and that second beep indicates that the changes have taken effect.
Indeed thanks for adding that to my reply.. and yeah dont use hdmi cable on it but the component cables because it resets your screen show up thingy in ps3 to.
04-26-2011, 07:36 PM
#9
bobstar1
Little One
Originally posted by MiLkY1210
This is correct, but for this to work, you will need to use the red, white and yellow cable as this is the default for the Ps3 and will be reset to this. Holding the power button down until you hear a second beep is correct and that second beep indicates that the changes have taken effect.
Originally posted by x
Ive had this multiply times already what you do, install the ps3 how u always did it, with the cables etc. after u done that u reset your ps3.
How to do that ;
1) Place the PS3 in standby mode. That's when it shows the red light.
2) Press and hold the power button on the console for 5 seconds until you hear 2 beeps
3) Turn on your PS3, if you don't experience the problem again. Most likely the PS3 reset fixed the console.
How to do that ;
1) Place the PS3 in standby mode. That's when it shows the red light.
2) Press and hold the power button on the console for 5 seconds until you hear 2 beeps
3) Turn on your PS3, if you don't experience the problem again. Most likely the PS3 reset fixed the console.
these are both right i done it loads of times
04-26-2011, 07:51 PM
#10
MiLkY1210
Brute
Originally posted by bobstar1
these are both right i done it loads of times
Yeah both are correct but if you are using a hdmi lead, you will need to plug in the red, white and yellow cables, as well as your hdmi lead, if not, you will still have no picture. Once you have pressed and held the button til you hear the second beep, the picture will be reset to run through the yellow cable, then you must go to display settings and reconfigure your Ps3 to output through the hdmi once again, change the channel on your tv to hdmi and the picture will be there. Its what i originally said in my first post.
---------- Post added at 02:51 PM ---------- Previous post was at 02:43 PM ----------
Originally posted by x
Indeed thanks for adding that to my reply.. and yeah dont use hdmi cable on it but the component cables because it resets your screen show up thingy in ps3 to.
Just wanted to make sure he used the components, i did explain this in my very first post.
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
