(adsbygoogle = window.adsbygoogle || []).push({}); Here's a Tutorial on how to get rid of the YLOD forever :wtf:

brief explanation: because of all the problems in the,ps3 and xbox 360 and others, for lead-free solder in micro processors, memories etc., by environmental laws, hence types of errors occur as the 3 red lights, now in new jasper plates called E74 or E 73. YLOD yellow and red flash of the PS3, or PSP that do not fire or do not read the UMD or on laptops that do not fire, mobile pda's etc..:confused:

A big world of technology with lead-free pewter finish eventually failed due to deterioration because they are of low quality as good lead-free tin is very expensive to apply to the markets of electronic technology factories. :confused:

As we all know the repairs made ​​today in the United States consoles such as PS3 and Xbox 360 does not last more than 6 months in some cases much less time, so far he has reached final settlement with huge guarantees following the replacement for lead-free pewter which has lead, as in the past.

This process is called reballing the gpu, cpu of a computer :confused:

It is intended that the lead solder of a ps3 or Xbox 360 will never have problems ever again.

And here it is the first Tutorial on How to Reball your ps3 in NGU

Materials:
1. Infrared reballing station (also the station reballing minutes by air).

2. Soldering Station and other hot air.

3. Reballing full kit, lead beads from 0.6 mm to Rebola, ps3 gpu stencils for the support kit.

4. Desoldering wide mesh if possible.

5. 2 types of flux the cough-wide vision and a special for Rebol rma this case is Chinese.

6. Meters meet or heat, or infrared meters, it is advisable to measure process temperatures and times.

7. Station to remove the bga pacifier, if your machine takes reballing perfect.

:O


Good And Begin!

1. completely disassemble the console to leave only clean cake board and without heat sinks.

2. apply flux vision cough or solder paste or flux around the gpu RSX video with a hot air station and a nozzle is not very large put the plate in vertical and we melting the paste to be getting under the fence where the ball gpu, I make it to half strength and half air temperature, once we see that added to the solder paste (or flus liquid) under the chip, which is not much dough we introduce to avoid others.

You must login or register to view this content.

3. Well prepared for plaque removal bga, assemble the motherboard in a special holder for the PS3 or if your machine takes bale grab plates and also fix it.

You must login or register to view this content.

3.1 start the infrared machine, each machine depends on
their thermo meet to measure their temperatures, in the case of my
achi-IR3 I extract the bga for 235g 10s. with light machine pacifier.

You must login or register to view this content.

4. bga cleaning or RSX gpu video of the PS3, turn on the station
enough temperature welding, applying solder paste or a similar vision cough across the bottom of the BGA (ball above desoldering) with a aser Punta possible as a flathead screwdriver we are making a ball of tin that is in the bga or gpu and go through the whole chip to leave the least possible tin, if there is rust made ​​are lead-royo and as I say I walked around the bga until almost nothing remains of tin or rust, then apply more paste and the Mayan wide and very hot soldering iron and screwdriver tip as we walked down to the bare tin surface clean once they are made free of alcohol and a clean cloth or paper as well and checked all points or pad's are not like in this photo oxidation

You must login or register to view this content.

5. proceed to clean the board, is very similar to the video gpu, same process, and be careful because as temperatures quitéis a pad on the motherboard is useless to stay, I recommend doing before with old plates supporting evidence;

You must login or register to view this content.

It has To be Really Clean Like spotless Clean

You must login or register to view this content.

6. well now proceed to solder balls in BGA, once clean bga or gpu Chinese flux applied a layer of very ligerita assemble the reballing kit put your stencil and made the ball move away the stencil and watch all the balls of 0.6 are all in place well colocaditas, turn on the heat gun (there are people who do it with my machine IR or ovens for this) so as I do any air force and temperature in half and we are seeing a process that at least for me it's very nice to see how all the balls are soldered, once cool to not play not to damage the balls of tin.
bga soldering the balls, when you are welding is a simple view

You must login or register to view this content.

after the balls are welde it is redy to be welde on the RSx plate

You must login or register to view this content.

7. Once cleaned up and Rebolo bga or gpu and we are readyto weld to the plate, same configurations temperatures to remove the bga as before, we set the gpu to ojímetro have 4 points of tin boxes it as central as possible for the view, turn on the machine and welding, when it comes to 235 you know and let cool apagáis at least 20 or 30 minutes without moving the plate for better welding.

You must login or register to view this content.

Well and you're ready and we have our reballing hecho.cSolo motherboard is cool and clean everything thoroughly with alcohol, apply thermal paste, I like the best Artic silver 5.99% silver but PUMP and more durable than silicone white and we can prove our super armored ps3 is now immune to stupid Sony errors

You must login or register to view this content.

And if everythin went as planned

You must login or register to view this content.

Only reballing process is more than enough to give a life of more than five years without stop playing ps3 =D

Well this tutorial is my doing, but neck would have succeeded without the Mister special collaboration deat mod chip and have made ​​many of their theories and advice and great teachers who are in the dumb gamers


I will make a video tutorial later and show to you how it looks likebut for now im Busy with final and shit but as soon as im done i will make it and upload it

:bro:

Also i will make one for the 360 later

Please thank Moondino from EOL who did an awsome job

Do you actually do the reballing for other people? I need one of my PS3 reballed.

Umm yeah will start doing it later because finals are coming up and gotta get throught those things with at lesat B to pass my class! =D

Just buy a new PS3 *cough*no xbox*cough* all that equipment would be so expensive.

There are some of people who have the materials, and i won't buy a shitty SLIM, i'm playing PS1 games btw.