Post: [TUTO FULL]: HACK / JAILBREAK PS4 5.05 (Local)
02-03-2019, 10:20 AM #1
IMTn
Platinum Seller
(adsbygoogle = window.adsbygoogle || []).push({});
[TUTO FULL]: HACK / JAILBREAK PS4 EN 5.05 (Local)

 

(This is the same principle as 4.55)

 

Required material:

 

1. Have a PS4 Fat / Slim / Pro in OFW 5.05 or lower.

2. A Windows PC with a network card and a modem router with multiple Ethernet ports.

3. Check that you are in OFW 5.05 on your PS4.

 

To check the update of the console: go to "Settings" then "System" and "System Information"

 

The firmware version of your console will be displayed in "System Software"

 

IMPORTANT: "DO NOT TAKE YOUR CONSOLE TO DATE BY INTERNET"

 

 

A- SOFTWARE UPDATE SYSTEM OFW 5.05

 

First of all, if you were in 4.05 or 4.55, disable the payload update blocker via the user guide

of your PS4, to avoid errors "impossible to access system storage" of this kind

 "Error SU 30634 -6 // CE-30021-6 // CE 30-30778-5"!

So the case or it gives nothing, We must erase the contents of the update folder of your PS4 by accessing the console via FTP and girlzilla,

in order to avoid an error see worse, blocking the console in case of update.


 

 

Follow this step if your PS4 is below 5.05 (If it is already in 5.05 go directly to step B)

 

                                               Link to download the OFW 5.05 (357 MB):

https://drivers.softpedia.com/get/gaming-consoles/Sony/Sony-PlayStation-4-Firmware-5-05.shtml

or

https://t.co/UFd0OmLSzu

 

 

For starters we are going to update 5.05 offline, unplug your Ethernet cable from your PS4, and remove the Bluray game disc in your PS4 if it's not already done!

 

We can update offline by USB key formatted in FAT32 or EXFAT, so:

 

Put the 5.05 file called "PS4UPDATE.PUP" in the USB key or hard drive formatted this way:

 

PS4 / UPDATE / PS4UPDATE.PUP

 

Note: PS4 and UPDATE are 2 Folders and PS4UPDATE.PUP is the update file!

 

To launch the update 5.05 on your PS4 from a USB key and without internet, you have to switch its console to Safe Mode:

 

 

Turn off the PS4 system by pressing the power button on the front panel. The power indicator will blink for a few seconds and then go out completely.
After the PS4 system turns off, press and hold the power key again. Only release it when you hear the second beep, a few seconds after the first beep by pressing the key.
Connect the DUALSHOCK 4 Wireless Controller using a supplied USB cable and press the PS button on the controller.
As soon as it is done, go to "3. Update the system software" logically the console will recognize the version 5.05 that is in your USB key.
Then choose "Update from USB storage device" and start the update. once done, you are now 5.05.
 

B- HACKER / JAILBREAK SA PS4 EN 5.05

 

 

NOTE: HAVE HIS PS4 IN OFW 5.05 TO START THIS STEP!

 

-Download then PS4 Exploit Host 0.4.3 Windows version: https://github.com/Al-Azif/ps4-exploit-host/releases/tag/v0.4.3

 

Important: It is necessary that your PS4 and your PC is connected in LOCAL to the same box (your router) via RJ-45, it also works

Wifi but LAN is simpler.

-Install the software "Python 3.5" (found on Google)

-Then unpack PS4 Exploit Host on your desktop.

 

After double click on ps4-exploit-host.exe and run it as Administrator.

 

NORMALLY you have a black window style cmd with:

 

ps4-ps4-feat-host-adapted-to-455-shift-v

Servers are running

Your DNS IP is: X.X.X.X

 

Let PS4 Exploit Host open now

 

(X.X.X.X is your IP address that will be used for your PS4)

 

-Then turn on your PS4 and go to "Settings" - "System" - "Automatic Downloads" AND you uncheck EVERYTHING! then with the round key turn back 2 times you tighten

normally in the "Settings" menu then go to "Network" you check only "Connect to the internet"

 

Now connect your PS4 to the router if it is not done like your PC which is logically already connected also with the Ethernet cable!

 

Then go to PS4 in Network "Configure the internet connection"

 

then "By network cable (LAN)"

 

then "Custom"

 

then "Automatic"

 

then "do not specify"

 

then choose "Manual"

 

As soon as you click on "Manual" you will:

In the "Configure the internet connection" menu

 

In "Primary DNS" put the IP address that is displayed in PS4 Exploit host of your PC X.X.X.X

  

In "Secondary DNS" you leave either 0.0.0.0 or X.X.X.X

 

As soon as it's done press "Next"

 

then "Automatic"

 

then "do not use"

 

and finally "Test the Internet connection"

 

Normally if everything has been respected at the
(adsbygoogle = window.adsbygoogle || []).push({});
02-03-2019, 08:16 PM #2
Vicodin10
https://discord.gg/save-wizard
Originally posted by IMTn View Post

Gethub link is broken

-Download then PS4 Exploit Host 0.4.3 Windows version: https://github.com/A...ases/tag/v0.4.3

That one
02-04-2019, 07:36 AM #3
IMTn
Platinum Seller
Originally posted by Vicodin10 View Post
Originally posted by IMTn View Post

Gethub link is broken

-Download then PS4 Exploit Host 0.4.3 Windows version: https://github.com/A...ases/tag/v0.4.3

That one

Link UPDATE : -Download then PS4 Exploit Host 0.4.3 Windows version: https://github.com/Al-Azif/ps4-exploit-host/releases/tag/v0.4.3

Copyright © 2026, NextGenUpdate.
All Rights Reserved.

Gray NextGenUpdate Logo