Post: Freeboot v0.03 REALEASED - Jtags
Options
04-16-2010, 08:57 PM
#1
Reaper
The Grim Reaper
You must login or register to view this content.
Download link:
You must login or register to view this content. & You must login or register to view this content.
libeay32.dll error? You must login or register to view this content.. (Copy bin/libeay32.dll from the RAR into the same directory as ibuild)
Completely replaces XBR! No dual-nand (Cygnos) needed!
It is confirmed that older original NAND dumps are supported by ibuild. 7371 is preferred, but not required!
irc.efnet.net #freeboot
This is the readme taken from xbox scene.
Originally posted by another user
__ ____ ___ ___ _____
/ _|_ __ ___ ___| __ ) / _ / _ _ _|
| |_| '__/ _ / _ _ | | | | | | || |
| _| | | __/ __/ |_) | |_| | |_| || |
|_| |_| ___|___|____/ ___/ ___/ |_|
[v0.03 - coded by ikari]
I. Introduction
================
freeBOOT is a rebooter for the Microsoft Xbox 360. This version of freeBOOT
allows you to reboot into kernel 2.0.9199 on all Xenon, Zephyr, Falcon, and
Jasper consoles, which are vulnerable to the JTAG hack.
This version of freeBOOT no longer requires a second flash memory and will
thus work with all currently existing solutions.
II. Bug Fixes
=============
none
III. New Features
=================
- updated to kernel 2.0.9199
- now supports all consoles and flashing solutions (ikari)
- removed memory protections (cOz)
Code can be executed and modified anywhere in the range from 0x80000000
to 0x9FFFFFFF. This can be used to create game trainers and will allow
for porting of emulators, which rely on dynamic compilation.
- encrypted DevKit XEXes are now working (cOz)
- includes dash launch patch (cOz)
- keyvault and console signature checks have been disabled (Bliep4Ever)
- LIVE/PIRS/GOD content fully working (cOz)
- internal security breach reports deactivated (Redline99)
- easier image generation process (ikari)
- ibuild can now also generate single flash XeLL and original images (ikari)
IV. Instructions
================
In contrast to previous freeBOOT releases, the image generation process has
been made a lot easier. As prerequisites you will need an image of your
console updated to kernel 2.0.7371 and an archive "9199.zip" available
at the usual places.
1. Extract your original image
Extract your original 7371 image with the following command:
> ibuild.exe x -d temp -p <cpu> -b <1bl> .7371.bin
2. Extract "9199.zip" archive
Extract the contents of the "9199.zip" archive into the "data"
directory.
3. Copy these files from "temp" to "data" directory
- crl.bin
- crl.bin.meta
- extended.bin
- extended.bin.meta
- kv.bin
- odd.bin
- odd.bin.meta
- secdata.bin
- secdata.bin.meta
- smc_config.bin
4. Patch SMC
Put a patched "smc.bin" in the "data" directory. For Cygnos360, a
patched SMC can be created with their software. There's also a
collection of patched SMCs available at the usual places. Make sure
to pick the right one for your console.
For other solutions, a patched SMC can be extracted from previously
released XeLL images.
5. Create the freeBOOT image
Finally, create your freeBOOT image with this command:
> ibuild.exe c freeBOOT -c <console> -d data -p <cpu>
-b <1bl> .binimage.bin .binfuses.bin
Replace <console> with either "xenon", "zephyr", "falcon", "jasper",
"jasper256" or "jasper512".
VII. Credits
============
Thanks a lot to [cOz] and Bliep4Ever for providing most of the new
patches in this release. Without their support, this would not have been
possible.
/ _|_ __ ___ ___| __ ) / _ / _ _ _|
| |_| '__/ _ / _ _ | | | | | | || |
| _| | | __/ __/ |_) | |_| | |_| || |
|_| |_| ___|___|____/ ___/ ___/ |_|
[v0.03 - coded by ikari]
I. Introduction
================
freeBOOT is a rebooter for the Microsoft Xbox 360. This version of freeBOOT
allows you to reboot into kernel 2.0.9199 on all Xenon, Zephyr, Falcon, and
Jasper consoles, which are vulnerable to the JTAG hack.
This version of freeBOOT no longer requires a second flash memory and will
thus work with all currently existing solutions.
II. Bug Fixes
=============
none
III. New Features
=================
- updated to kernel 2.0.9199
- now supports all consoles and flashing solutions (ikari)
- removed memory protections (cOz)
Code can be executed and modified anywhere in the range from 0x80000000
to 0x9FFFFFFF. This can be used to create game trainers and will allow
for porting of emulators, which rely on dynamic compilation.
- encrypted DevKit XEXes are now working (cOz)
- includes dash launch patch (cOz)
- keyvault and console signature checks have been disabled (Bliep4Ever)
- LIVE/PIRS/GOD content fully working (cOz)
- internal security breach reports deactivated (Redline99)
- easier image generation process (ikari)
- ibuild can now also generate single flash XeLL and original images (ikari)
IV. Instructions
================
In contrast to previous freeBOOT releases, the image generation process has
been made a lot easier. As prerequisites you will need an image of your
console updated to kernel 2.0.7371 and an archive "9199.zip" available
at the usual places.
1. Extract your original image
Extract your original 7371 image with the following command:
> ibuild.exe x -d temp -p <cpu> -b <1bl> .7371.bin
2. Extract "9199.zip" archive
Extract the contents of the "9199.zip" archive into the "data"
directory.
3. Copy these files from "temp" to "data" directory
- crl.bin
- crl.bin.meta
- extended.bin
- extended.bin.meta
- kv.bin
- odd.bin
- odd.bin.meta
- secdata.bin
- secdata.bin.meta
- smc_config.bin
4. Patch SMC
Put a patched "smc.bin" in the "data" directory. For Cygnos360, a
patched SMC can be created with their software. There's also a
collection of patched SMCs available at the usual places. Make sure
to pick the right one for your console.
For other solutions, a patched SMC can be extracted from previously
released XeLL images.
5. Create the freeBOOT image
Finally, create your freeBOOT image with this command:
> ibuild.exe c freeBOOT -c <console> -d data -p <cpu>
-b <1bl> .binimage.bin .binfuses.bin
Replace <console> with either "xenon", "zephyr", "falcon", "jasper",
"jasper256" or "jasper512".
VII. Credits
============
Thanks a lot to [cOz] and Bliep4Ever for providing most of the new
patches in this release. Without their support, this would not have been
possible.
Originally posted by another user
Just when you thought it was safe to play cod again, without getting attacked by walking, invincible sentry guns firing a stream of ‘noob tubes’ and rpg’s (See Here) . Well it’s here, after much anticipation, freeboot v0.03 an up to date exploited kernel (9199), has been released for the Xbox 360. Originally freeboot needed a secondary nand solution, either a Cygnos mod chip or a homebrew version such as the XD card hack. However v0.03 can be flashed to the 360’s nand just like XBR. Now this may be a bit complex for all of you that bought your consoles and may not be for the average ‘noob’ so don’t get too excited as you may struggle. The instructions are a bit vague but if you know what you’re doing then you should be good to go.
[spolier]Ok guys I tried to build my own image to see how easy it is and I was successful but I didn’t flash my 360 so please correct me if something is wrong here
(my only concern is that I obtained the smc.bin from Cygnos360 V2 SMC Collection.zip)
This was done on Vista 32-bit
Tools needed:
1) Auto Xbins : Auto Xbins
2) freeBOOT-0.031.zip from xbins : /XBOX 360/development/freeBOOT/
3) 9199.zip from xbins: /XBOX 360/development/freeBOOT/
4) Cygnos360 V2 SMC Collection.zip from xbins: /XBOX 360/development/Cygnos360/
5) libeay32.zip libeay32
6) Your original nand image (**DOES NOT NEED TO BE 7371**)
7) Your CPU key
1. First things first open up freeBOOT-0.031.zip and extract it to your desktop
You must login or register to view this content.
2. Open up the libeay32.zip and extract the libeay32.dll to the freeBOOT-0.031 folder:
You must login or register to view this content.
3. Take your original nand dump and for the sake of the guide rename it to original.bin, after put that file original.bin into your freeboot-0.031 it should look like this:
IMG]https://i42.tinypic.com/ix9w6w.jpg[/IMG]
4. Next you are going to go to your desktop, hold down shift and while holding shift down click open in command window here:
You must login or register to view this content.
5. Now when your command window opens up it should look like this:
You must login or register to view this content.
6. Now you are going to have to copy this line and paste it into the CMD window (just replace the CPUKEY line with your cpukey):
ibuild.exe x -d temp\ -p CPUKEY -b DD88AD0C9ED669E7B56794FB68563EFA original.bin and press enter.
This is what your window should look like the red is supposed to be your cpukey (I blocked out mine)
You must login or register to view this content.
7. Now open up 9199.zip and put all the contents from the zip into the freeBOOT-0.031\data folder
You must login or register to view this content.
8. Now go to freeBOOT-0.031\temp and take out these files from there and put them into the freeBOOT-0.031\data folder
- crl.bin
- crl.bin.meta
- extended.bin
- extended.bin.meta
- kv.bin
- odd.bin
- odd.bin.meta
- secdata.bin
- secdata.bin.meta
- smc_config.bin
9. Now open up Cygnos360 V2 SMC Collection.zip and pick the file that’s associated for your console and extract it. After you extract it rename the file to smc.bin Now put the smc.bin file into the freeBOOT-0.031\data folder
You must login or register to view this content.
10. Now go to your CMD window and copy this line and paste it in and press enter:
ibuild.exe c freeBOOT -c CONSOLE -d data\ -p CPUKEY -b DD88AD0C9ED669E7B56794FB68563EFA bin\image.bin bin\fuses.bin
- Replace CONSOLE with your console name one of these: xenon, zephyr, falcon, jasper, jasper256 or jasper512
- Once again replace CPUKEY with your cpukey
This is what it should look like (The red is my cpukey and as you can see my console is a falcon so I wrote falcon in there):
You must login or register to view this content.
11. Your done now go to the freeboot-0.031\bin folder and you should see image.bin, This is your newly built nand image now go and flash it the way you prefer.
You must login or register to view this content.
**For flashing with XBR this should work (didnt test it): Take the image.bin that was created from the freeboot-0.031\bin folder and rename it to updflash.bin Then put updflash.bin into a flash drive (USB Stick) Then run 360Flashtool from your 360 When in 360Flashtool press **Button A - Write updflash.bin to Nand** and thats it you should have a newly installed freeBOOT with 9199 kernal.
**If your avatars dont work after flashing freeBOOT from what I read (and what I assumed originally) you take the 9199 update and run it like any normal update. The xbox will recognize you have the 9199 update but that you are missing the avatar files so it will then just install the files needed for avatar support
Optional:
If you want xellous installed right before step 9 open up XeLLous_v1.0.zip XeLLous_v1.0 and extract xell-2f.bin and put that file into freeBOOT-0.031\bin
(let it overwrite the old file) and then continue with step 10 and build your image.
I hope this helps clear the question for noobs such as me I just used some common sense to do this hope it helps enjoy freeboot and thanks to ikari for freeboot
*I am not responsible for ANYTHING that happens while following this guide*
If anything is incorrect please let me know so I can fix it I am in no way an expert at all and if I missed anything let me know. Cheers[/spolier]
Please dont forget to rep/thank/nominate! Thanks everybody
Not My Boot! And my tuorial! And Yes this does bring jtags back online 100%! Source: TTG & S7!
Last edited by
Reaper ; 04-17-2010 at 07:07 PM.
Reason: Fix Title
The following 4 users say thank you to Reaper for this useful post:
04-18-2010, 11:49 PM
#21
NGU Modded XP
You've Just Been JTAG'ed
Copyright © 2024, NextGenUpdate.
All Rights Reserved.
