Post: [TUT] How to turn a Stock RF Board LED's Red
Options
02-16-2011, 05:42 PM
#1
Jason Statham
Banned
How to turn a Stock RF Board LED's Red
Requirements:
• Soldering iron
• Solder
• Tools to disassemble your Xbox
• T8 Torx Screwdriver or Screw Piece
Step by Step Instructions:
1. Get your Soldering Iron Heating up
2. Pull everything off your Xbox so it's just the shell like this:
You must login or register to view this content.
3. Take the White cover off the RF Board, Remove the 3 T8 Screws and then take out the Board.
You must login or register to view this content.
4. Put the Board on something Metal/Wood or anything Solid and Solder the TOP and LEFT bit of the Top LEFT LED.
• After you've done it should look like this:
You must login or register to view this content.
• This is what it looks like after you Solder the board.
You must login or register to view this content.
5. Reassemble your Xbox 360 and you're done!
You must login or register to view this content.
1. Get your Soldering Iron Heating up
2. Pull everything off your Xbox so it's just the shell like this:
You must login or register to view this content.
3. Take the White cover off the RF Board, Remove the 3 T8 Screws and then take out the Board.
You must login or register to view this content.
4. Put the Board on something Metal/Wood or anything Solid and Solder the TOP and LEFT bit of the Top LEFT LED.
• After you've done it should look like this:
You must login or register to view this content.
• This is what it looks like after you Solder the board.
You must login or register to view this content.
5. Reassemble your Xbox 360 and you're done!
You must login or register to view this content.
It is your responsibility if anything goes wrong during this process.
02-28-2011, 12:57 AM
#2
Moto Cross
Auction King
il try this now post back in a sec
---------- Post added at 07:57 PM ---------- Previous post was at 07:40 PM ----------
Requirements:
• Soldering iron
• Solder
• Tools to disassemble your Xbox
• T8 Torx Screwdriver or Screw Piece
it worked but you forgot to mention you have to also solder the bottom left of the bottom right led to make the bottom leds go
---------- Post added at 07:57 PM ---------- Previous post was at 07:40 PM ----------
Originally posted by xL1V1NxL3G3NDx
How to turn a Stock RF Board LED's Red
Requirements:
• Soldering iron
• Solder
• Tools to disassemble your Xbox
• T8 Torx Screwdriver or Screw Piece
Step by Step Instructions:
1. Get your Soldering Iron Heating up
2. Pull everything off your Xbox so it's just the shell like this:
You must login or register to view this content.
3. Take the White cover off the RF Board, Remove the 3 T8 Screws and then take out the Board.
You must login or register to view this content.
4. Put the Board on something Metal/Wood or anything Solid and Solder the TOP and LEFT bit of the Top LEFT LED.
• After you've done it should look like this:
You must login or register to view this content.
• This is what it looks like after you Solder the board.
You must login or register to view this content.
5. Reassemble your Xbox 360 and you're done!
You must login or register to view this content.
1. Get your Soldering Iron Heating up
2. Pull everything off your Xbox so it's just the shell like this:
You must login or register to view this content.
3. Take the White cover off the RF Board, Remove the 3 T8 Screws and then take out the Board.
You must login or register to view this content.
4. Put the Board on something Metal/Wood or anything Solid and Solder the TOP and LEFT bit of the Top LEFT LED.
• After you've done it should look like this:
You must login or register to view this content.
• This is what it looks like after you Solder the board.
You must login or register to view this content.
5. Reassemble your Xbox 360 and you're done!
You must login or register to view this content.
It is your responsibility if anything goes wrong during this process.
it worked but you forgot to mention you have to also solder the bottom left of the bottom right led to make the bottom leds go
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
