Post: {TUT} How to update your RGH to 16747 dashboard (The easiest way)
Options
05-29-2014, 08:06 AM
#1
xxAussiefella69
Grunt
If your planning to keep the console offline there's no need to follow this tut. 
What you will need: A brain, A Computer and a formatted FAT32 USB
Downloads
: Flash 360: You must login or register to view this content.
XeBuildGUI16747: You must login or register to view this content.
Dashlaunch 3.12: You must login or register to view this content.
Step 1: First of all plug USBdrive with computer and format as Fat32. then copy "flash 360" folder in root of USB drive (linked above)(download and unrar) now remove it.
Step 2: Plug usb drive with xbox360 and turn it on.
Step 3: Launch xexmenu or fsd and go to usb drive and then "flash 360" folder (you just copied to usb drive) and run Flash360.xex file.
Step 4: You'll see three options:
Button A : write updflash.bin to nand
Button B : write update areas of rebooters
Button X : backup current nand to file
NOW be-careful press X button from your 360 controller to backup nand and then it will ask for save entire nand then press A button to continue.
that will save your nand backup named "flashdmp.bin" file in the root of "flash 360" folder.
Step 5: Shutdown your xbox360 console and remove USB drive from xbox360.
Step 6: Plug usb drive to your computer and just copy "flashdmp.bin" file from "flash 360" folder to your pc anywhere you want.
Step 7: Now you have to need your cpu key. its very simple just press eject button on xbox360 console and wait for boot.
Step 8: Once cpu key shows up bottom of your screen, please read very carefully and copy it down on a papper and make a .txt (text document) on your computer and type the cpu key then save it where you want.
Step 9: Now download "xeBuild_GUI_2.091--16547" file (linked above) unrar it and you'll find "xeBuild_GUI_2.093--16747" folder. ( i have updated and downloaded $SystemUpdate_16747 file in this folder. You don't need to do anything)
Step 10: Run "xeBuild GUI 2.0.exe" file from this folder.
Step 11: Expand "kernel version" and set 2.0.16747.0. (if this already set 2.0.16747.0 so leave it as it is)
and now click on source file "open" button and open "flashdmp.bin" file you just copied from usb drive to your computer.
Step 12: Now click on "Get cpukey from keys.txt" button and open your saved cpu key.
Step 13: Click on output path "save" button and named it "updflash" then save it where you want.
Step 14: Then hit "Generate hacked image" button and wait a while then it'll pop up a message and click on "yes" button.
Step 15: Now copy "updflash.bin"( you have just created and saved in wherever your computer ) to "flash 360" folder in usb drive.
Step 16: Remove USB drive from computer and plug in xbox360. Now turn on your xbox360.
Step 17: Launch xexmenu or fsd and go to usb drive and then "flash 360" folder and run Flash360.xex file.
Step 18: You'll see these three options again :
Button A : write updflash.bin to nand
Button B : write update areas of rebooters
Button X : backup current nand to file
Now press A button from your 360 controller to write updflash.bin. then press A again to "raw flash with keeping current kv/config" then press A Button then start button to continue.
Step 19: Let it 100% complete then press any button then back buttton after countdown unplug your xbox360 power cable and av cables and any attached hdd for 2 minutes.
Step 20: After 2 minutes plug back all cables and turn on your xbox360 then configure your new 16747 dash do not connect live just enjoy your new 16747 dashboard.
NOTE: You won't see your avatars but not to worry get on a XBLSE or a xbox sever (allow you to connect) you will get a update and download it BUT MAKE SURE YOU ARE 100% ON 16747 FIRST!
Big thanks to: Hhaa
Copyright © 2024, NextGenUpdate.
All Rights Reserved.
