(adsbygoogle = window.adsbygoogle || []).push({}); Quick JTAG Tutorial:
What you need

* xenon xbox360
* 5x 100ohm resistors
* 3x 330ohm resistors
* 1mtr kynar wire
* 1x old printer cable
(the type that you can unclick the plastic end bits to change pin config of the wires)
* pc with a printer port that operates in spp mode
(standard parallel port) most old pc's but some new pc's have it
* nandpro (put nandpro20 folder in the root of c drive)
* dlportio (comes with nandpro)
* Xenon_hack.bin file (rename to hack and put in nandpro20 folder)
* Hex comparison (or a md5 hash program)


What you need to do
1. Solder in the lpt/jtag wires.
2. Boot your pc to the bios settings ans set the lpt to spp mode'
3. Boot to windows xp (vista is incompatible) install dlportio driver and reboot pc.
4. In the windows start menu click on run and type in command then press enter.(opens command prompt)
5. Plug the power into your xbox360 (does not need to be turned on) plug the lpt port into the pc.
6. In command prompt type c: andpro20 andpro.exe lpt: -r16 nandbackup1.bin.
7. In command prompt type c: andpro20 andpro.exe lpt: -r16 nandbackup2.bin.
8. Compare with hex comparison. (if files are different repeat steps 6,7,8 until they match so you are sure of a good backup)
9. In command prompt type c: andpro20 andpro.exe lpt: -w16 hack.bin
10. Remove the lpt cable from the pc and boot the xbox360 and you should have a blue screen with writing (if you dont you *****ed up and need to repeat step 9)
11. Unsolder the lptjtag wires but leave the ones with the 330ohm resistors they need to stay for life
12. Just pop in a usb stick or disk with the desired apps or emulators and enjoy,
Just sharing Thank and +rep for erm... Sharing
Note: Has not been posted on here before.
DO NOT TRY IF YOU ARE NOT CONFIDENT ANYTHING YOU DO I CAN BE HELD RESPONSIBLE FOR. FURTHER DETAILS PHONE 118247

Do you no of any good videoss with step by step

No but if my tutorial wasnt helpful just go on youtube its the home of all tutorials.

Xenon:
You must login or register to view this content.

Where it says to use switching diodes, used to be 330ohm resistors instead, which is what I am using, I do not know if this works yet seeing I am having trouble simply opening the hard rubber head on my LPT cord to rewire the pin config, I will update when I am finished.

Where do i find these items?

Can any of you host 10th prestige lobbies / unlock everything lobbies if so pm me pls

You can buy the resistors from any electronic hobby shop or Radio Shack. Radio Shack has them for $0.99 a pack.