(adsbygoogle = window.adsbygoogle || []).push({}); Quick JTAG Tutorial:
What you need

* xenon xbox360
* 5x 100ohm resistors
* 3x 330ohm resistors
* 1mtr kynar wire
* 1x old printer cable
(the type that you can unclick the plastic end bits to change pin config of the wires)
* pc with a printer port that operates in spp mode
(standard parallel port) most old pc's but some new pc's have it
* nandpro (put nandpro20 folder in the root of c drive)
* dlportio (comes with nandpro)
* Xenon_hack.bin file (rename to hack and put in nandpro20 folder)
* Hex comparison (or a md5 hash program)


What you need to do
1. Solder in the lpt/jtag wires.
2. Boot your pc to the bios settings ans set the lpt to spp mode'
3. Boot to windows xp (vista is incompatible) install dlportio driver and reboot pc.
4. In the windows start menu click on run and type in command then press enter.(opens command prompt)
5. Plug the power into your xbox360 (does not need to be turned on) plug the lpt port into the pc.
6. In command prompt type c: andpro20 andpro.exe lpt: -r16 nandbackup1.bin.
7. In command prompt type c: andpro20 andpro.exe lpt: -r16 nandbackup2.bin.
8. Compare with hex comparison. (if files are different repeat steps 6,7,8 until they match so you are sure of a good backup)
9. In command prompt type c: andpro20 andpro.exe lpt: -w16 hack.bin
10. Remove the lpt cable from the pc and boot the xbox360 and you should have a blue screen with writing (if you dont you *****ed up and need to repeat step 9)
11. Unsolder the lptjtag wires but leave the ones with the 330ohm resistors they need to stay for life
12. Just pop in a usb stick or disk with the desired apps or emulators and enjoy,
Just sharing Thank and +rep for erm... Sharing
Note: Has not been posted on here before.
DO NOT TRY IF YOU ARE NOT CONFIDENT ANYTHING YOU DO I CAN BE HELD RESPONSIBLE FOR. FURTHER DETAILS PHONE 118247

nice tutorial but pictures would be useful. Oh and you dont need a xenon to jtag you can use zephyr, falcon and now jasper

Ok im trying Jtag my xbox today. I have a falcon mother board and the kernal is 8955 Bk is 1888 would i beable to do it? I also have windows vista.

lol, that piece "I CAN BE HELD RESPONSIBLE FOR. FURTHER DETAILS PHONE 118247" Nice number, is it business or residential? Lol.

pictures = better

Very nice tutorial, I did this in only 3 hours!

Kind of hard to do without pictures

the point of a JTagged xbox 360 is that it allows you to do certain things that obviously couldnt do on a Un-modded one you can do certain things like have sega games on your xbox 360 , have your own custom .XeX Files this would allow you to edit basically everything to your peril so that is a big benefit and i have not tried this but this as my console is banned but apparently you can use codes that have aready been used for MSP and Xbox live. Pictures will be on the way but if im getting pictures i want it to make the tutorial detailed to the maximum as i can so i guess it'll will be worth it if everybody waits until i get pictures.