Post: FULL Decompress, Edit, and Recompress Patch Tutorial
Options
12-03-2010, 01:46 AM
#1
Tupac17
I ♥ COD4
If you want the offsets to other gscs go here You must login or register to view this content.
- open cmd
- type
cd desktop/pack
- type
offzip -a -z -15 patch_mp.ff ./ 0
4. Delete all the new created files except these (only two of them will be used in this tutorial) 0002cbcc 000295f3 00030783
5. Open0002cbcc 000295f3 in your hex editor
You must login or register to view this content.
6. In 000295f3 press
ctrl + E
7. In the start box put
A00D
8. In length box put
5FF3
9. Click okYou must login or register to view this content.10. Press
ctrl + C
11. Then
Ctrl + N
12. Then
Ctrl + V
You must login or register to view this content.13. Now go to the 0002cbcc file
14. Press ctrl + E start offset is
0
15. Length is
1A9B
16. Press
ok
17. Press
Ctrl + C
18. Go to the end of the new file you created and press
Ctrl+V
19. Delete all of the 00 at the end end of the file It should look something like the picture below with the 0A at the endYou must login or register to view this content.
19. Save the file as
rank.gsc
20. Go to your pack folder and right click on rank.gsc and open it up with notepad++ or whatever text editor you useYou must login or register to view this content.
21. Edit the file however you want
22. Save the file after you edit in and open it back up in the hex editor
23. Press
Ctrl + E
24. In the Start offset box put
0
25. In the length box put
5ff3
26. Go to the 000295f3 file
27. Press
Ctrl + E
28. In the Start offset box put
A00D
29. In the length box put
5ff3
30. Press
ctrl + B
to paste the selected text from rank.gsc into the selected area in 000295f3 (make sure you don't change the file size.)31. Save 000295f3
32. Open cmd
33. type
[FONT=Arial][SIZE=3][COLOR=Blue][COLOR=Black]cd desktop/pack[/COLOR][/COLOR][/SIZE][/FONT]
then press enter34. then type
packzip -o 0x[COLOR=#000000][COLOR=#0000bb][COLOR=Black][FONT=Arial]000295f3[/FONT][/COLOR][/COLOR][/COLOR] -w -15 [COLOR=#000000][COLOR=#0000bb][COLOR=Black][FONT=Arial]000295f3[/FONT][/COLOR][/COLOR][/COLOR].dat patch_mp.ff
35. Close 000295f3 in your hex editor
36. Go to rank.gsc in your hex editor
37. Press
Ctrl + G
38. Go to offset
5ff3
39. Press
Ctrl + Shift + END
40. Copy the selected text41. Go to 0002cbcc
42. Press
Ctrl + E
43. Start offset is
0
44. Length is
1A9B
45. Press
Ctrl + B
to paste what you copied from rank.gsc46. Place the insertion point in right after the red lettersYou must login or register to view this content.
47. Now push
Ctrl + E
48. Leave Start offset wherever it is at49. In end put
1a9b
50. Click ok51. right click the selected area
52. Click fill selection
53. Fill with 00You must login or register to view this content.
54. Save the file
55. open cmd and type
[FONT=Arial][SIZE=3][COLOR=Blue][COLOR=Black]cd desktop/pack[/COLOR][/COLOR][/SIZE][/FONT]
56. then type
packzip -o 0x0002cbcc -w -15 0002cbcc.dat patch_mp.ff
You must login or register to view this content.Your Done!!
Last edited by
Tupac17 ; 12-28-2010 at 02:14 AM.
The following 34 users say thank you to Tupac17 for this useful post:
.Mitch, |ManiaC|, $oulja, 8======D----, alex1994, b0snian, Dreamcather, eddydiep, Galbiy, Hawkin, ImDUB, The Epic, JamazkieHD, jammie01, jkry_2_1_, juddylovespizza, kkid423, Lofti, MaKaRoFF, maps4890, marvin1554*, Moto Cross, mtuck317, Mw2Freak13, MyNGUuserName, nandos678, CHAOZ, saudi--fantom, Sempiternal, Solid Snake, the_hack, w8t4it, xMySTiFy
12-17-2010, 09:55 PM
#29
Tupac17
I ♥ COD4
Originally posted by beryce
i cant find the 0002cbc file
i know right i just posted a thread about this i am trying to figure out whats up idk
---------- Post added at 05:55 PM ---------- Previous post was at 05:55 PM ----------
Originally posted by CHEWKEYS
thanks. worked
good i am glad it did for someone lol
12-17-2010, 11:12 PM
#30
beryce
Goal 500 Posts!
Originally posted by Tupac17
i know right i just posted a thread about this i am trying to figure out whats up idk
---------- Post added at 05:55 PM ---------- Previous post was at 05:55 PM ----------
good i am glad it did for someone lol
---------- Post added at 05:55 PM ---------- Previous post was at 05:55 PM ----------
good i am glad it did for someone lol
12-19-2010, 01:43 PM
#34
Karoolus
I'm the W@W Menu Guy !
Originally posted by Tupac17
This tutorial shows you how to edit _rank.gsc. If you follow the tutorial you will not get a black screen, but you will still get syntax error if you code has errors. Please use a clean patch or a patch you know is already working when doing this
You could edit my decompress/compress .bat file to work with cod4
would make it a LOT easier, as i've noticed that many ppl fck up their patch while compressing..
type 1 number wrong & your patch won't work anymore..
if you don't want to do it, i will
12-19-2010, 05:58 PM
#35
h123321a_lol
Brute
when i edit patch and test
i get ERROR :
script compile error bad token
( see console for details )
i get ERROR :
script compile error bad token
( see console for details )
Last edited by
h123321a_lol ; 12-20-2010 at 05:39 AM.
Copyright © 2024, NextGenUpdate.
All Rights Reserved.
