Post: Administrative access in school! (cmd, & drive access)
Options
03-04-2011, 10:30 PM
#1
<Jimbo>
</Jimbo>
Well, recently I have been messing about with the PC server in my school and found a "loophole" in the boot! :p
Basically my aim was to gain administrative access and I got administrative access!
Right, try this only if NO other methods work! =D
1)Boot the computer in your school, allow this to load ...
You must login or register to view this content.
2)Swich off via power source, (Plug, switch, yankin out wires, etc... )
3)Switch on the PC and then switch it back off whilst it is loading (before windows).
4)Power back on, but then hold down the power button on the computer until it's off again. note
Press power button before windows boots!)5)Then turn it on you should get this screen...
You must login or register to view this content.
If you don't, just repeat step 1-5 but do step 4 twice,
this should work!
6)Select "Safe Mode with command prompt" you may then get this...
You must login or register to view this content.
Followed by a giant login screen...
7)Login with the following...
username:administrator
password: ***Leave this blank***
... then press enter!
You should get this...
You must login or register to view this content.
YAY! :p
8.)type in the following...
net user administrator /active:no
...followed by enter...
...then...
net user administrator /active:yes
...followed by enter!
9)Restart the computer, then log onto the computer with
user: administrator
Pass:
not the server/network!
10)Enjoy your full Drive access for now... I am working on server access! :black:
Do some cool thing's! =D
in Start>Run>cmd
put in
telnet towel.blinkenlights.nl
enjoy starwars! :p
Okay, now Simple as to gain network access to any internet site...
Download this: You must login or register to view this content.
Extract and put onto USB, then plug into the PC in school, and run from the USB! (Don't put onto school drives).
Need any help?! Post below! :p
Windows XP and Windows 7 only! :p
Please post below if you have made this work on another version of windows! :y:
Disclamer: I am not resposible for the consequenses for you doing this, nor am I responsible for you getting banned... but do feel free to tell the banner that, Jimbo from NGU sent you! :carling:
The following 11 users say thank you to <Jimbo> for this useful post:
The following user thanked Cain for this useful post:
The following user thanked Cody_h4x for this useful post:
03-19-2011, 06:48 PM
#41
DRFT-ii_JOKER
EPIC WINNING
Question... Is 5th year the same as year 11... =D
03-24-2011, 09:46 PM
#44
Luciano2572
Are you high?
03-24-2011, 09:50 PM
#45
Kidd Cold
**** my Toaster !~!
Originally posted by 123tonka
The school I attend has 3 full time workers making sure people like me don't hack the computers... They failed.
Well, recently I have been messing about with the PC server in my school and found a "loophole" in the boot! :p
Basically my aim was to gain administrative access and I got administrative access!
Right, try this only if NO other methods work! =D
1)Boot the computer in your school, allow this to load ...
You must login or register to view this content.
2)Swich off via power source, (Plug, switch, yankin out wires, etc... )
3)Switch on the PC and then switch it back off whilst it is loading (before windows).
4)Power back on, but then hold down the power button on the computer until it's off again. notePress power button before windows boots!)
5)Then turn it on you should get this screen...
You must login or register to view this content.
If you don't, just repeat step 1-5 but do step 4 twice,
this should work!
6)Select "Safe Mode with command prompt" you may then get this...
You must login or register to view this content.
Followed by a giant login screen...
7)Login with the following...
... then press enter!
You should get this...
You must login or register to view this content.
YAY! :p
8.)type in the following...
...followed by enter...
...then...
...followed by enter!
9)Restart the computer, then log onto the computer with
not the server/network!
10)Enjoy your full Drive access for now... I am working on server access! :black:
Do some cool thing's! =D
in Start>Run>cmd
put in
enjoy starwars! :p
Okay, now Simple as to gain network access to any internet site...
Download this: You must login or register to view this content.
Extract and put onto USB, then plug into the PC in school, and run from the USB! (Don't put onto school drives).
Need any help?! Post below! :p
Disclamer: I am not resposible for the consequenses for you doing this, nor am I responsible for you getting banned... but do feel free to tell the banner that, Jimbo from NGU sent you! :carling:
Well, recently I have been messing about with the PC server in my school and found a "loophole" in the boot! :p
Basically my aim was to gain administrative access and I got administrative access!
Right, try this only if NO other methods work! =D
1)Boot the computer in your school, allow this to load ...
You must login or register to view this content.
2)Swich off via power source, (Plug, switch, yankin out wires, etc... )
3)Switch on the PC and then switch it back off whilst it is loading (before windows).
4)Power back on, but then hold down the power button on the computer until it's off again. note
Press power button before windows boots!)5)Then turn it on you should get this screen...
You must login or register to view this content.
If you don't, just repeat step 1-5 but do step 4 twice,
this should work!
6)Select "Safe Mode with command prompt" you may then get this...
You must login or register to view this content.
Followed by a giant login screen...
7)Login with the following...
username:administrator
password: ***Leave this blank***
... then press enter!
You should get this...
You must login or register to view this content.
YAY! :p
8.)type in the following...
net user administrator /active:no
...followed by enter...
...then...
net user administrator /active:yes
...followed by enter!
9)Restart the computer, then log onto the computer with
user: administrator
Pass:
not the server/network!
10)Enjoy your full Drive access for now... I am working on server access! :black:
Do some cool thing's! =D
in Start>Run>cmd
put in
telnet towel.blinkenlights.nl
enjoy starwars! :p
Okay, now Simple as to gain network access to any internet site...
Download this: You must login or register to view this content.
Extract and put onto USB, then plug into the PC in school, and run from the USB! (Don't put onto school drives).
Need any help?! Post below! :p
Disclamer: I am not resposible for the consequenses for you doing this, nor am I responsible for you getting banned... but do feel free to tell the banner that, Jimbo from NGU sent you! :carling:
Not sure if anyone mentioned but this method will only work with XP, Vista doesn't support the secret admin account and I'm uncertain if windows 7 does either.
03-24-2011, 10:04 PM
#46
<Jimbo>
</Jimbo>
Thanks, :y: I'll add it to my thread... I can confirm that it works on Windows 7! =D
---------- Post added at 10:04 PM ---------- Previous post was at 09:57 PM ----------
I'm not 100% sure about your server... but you could try, I have simply stole the program from a teeachers computer via USB, when they wasn't about... then installed it on the computer I usually use under my username! =D
Originally posted by Kidd
Not sure if anyone mentioned but this method will only work with XP, Vista doesn't support the secret admin account and I'm uncertain if windows 7 does either.
---------- Post added at 10:04 PM ---------- Previous post was at 09:57 PM ----------
I'm not 100% sure about your server... but you could try, I have simply stole the program from a teeachers computer via USB, when they wasn't about... then installed it on the computer I usually use under my username! =D
Originally posted by Luciano2572
lol with this can we change our grades? lmao 
and i can acess cmd on my school. what can i do with it ?
and i can acess cmd on my school. what can i do with it ?
The following 2 users say thank you to <Jimbo> for this useful post:
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
