Post: Administrative access in school! (cmd, & drive access)
Options
03-04-2011, 10:30 PM
#1
<Jimbo>
</Jimbo>
Well, recently I have been messing about with the PC server in my school and found a "loophole" in the boot! :p
Basically my aim was to gain administrative access and I got administrative access!
Right, try this only if NO other methods work! =D
1)Boot the computer in your school, allow this to load ...
You must login or register to view this content.
2)Swich off via power source, (Plug, switch, yankin out wires, etc... )
3)Switch on the PC and then switch it back off whilst it is loading (before windows).
4)Power back on, but then hold down the power button on the computer until it's off again. note
Press power button before windows boots!)5)Then turn it on you should get this screen...
You must login or register to view this content.
If you don't, just repeat step 1-5 but do step 4 twice,
this should work!
6)Select "Safe Mode with command prompt" you may then get this...
You must login or register to view this content.
Followed by a giant login screen...
7)Login with the following...
username:administrator
password: ***Leave this blank***
... then press enter!
You should get this...
You must login or register to view this content.
YAY! :p
8.)type in the following...
net user administrator /active:no
...followed by enter...
...then...
net user administrator /active:yes
...followed by enter!
9)Restart the computer, then log onto the computer with
user: administrator
Pass:
not the server/network!
10)Enjoy your full Drive access for now... I am working on server access! :black:
Do some cool thing's! =D
in Start>Run>cmd
put in
telnet towel.blinkenlights.nl
enjoy starwars! :p
Okay, now Simple as to gain network access to any internet site...
Download this: You must login or register to view this content.
Extract and put onto USB, then plug into the PC in school, and run from the USB! (Don't put onto school drives).
Need any help?! Post below! :p
Windows XP and Windows 7 only! :p
Please post below if you have made this work on another version of windows! :y:
Disclamer: I am not resposible for the consequenses for you doing this, nor am I responsible for you getting banned... but do feel free to tell the banner that, Jimbo from NGU sent you! :carling:
The following 11 users say thank you to <Jimbo> for this useful post:
03-30-2011, 06:53 AM
#48
Chrom3D
Big Sister
Hmmm. Iv'e already gained admin access to school computer, but in a different way. Anyway the admin account is for the computer, not the domain. Yea, basically all computers have the same username and password for the admin account. But their still not in the domain.
Is there a possible way i can make an admin account on the domain, from the computer admin? I know the usual way of doing this, but it's occurs an error while doing it.
The relationship between this workstation and the domain was broken
Something like this, any idea? I know the translation was bad... But huh, im doing excam right know, so im in a rush. (Yea my school fails to close down the wifi)
Is there a possible way i can make an admin account on the domain, from the computer admin? I know the usual way of doing this, but it's occurs an error while doing it.
The relationship between this workstation and the domain was broken
Something like this, any idea? I know the translation was bad... But huh, im doing excam right know, so im in a rush. (Yea my school fails to close down the wifi)
03-30-2011, 08:07 PM
#49
Joshycc
Wanna Surf ?
Originally posted by 123tonka
The school I attend has 3 full time workers making sure people like me don't hack the computers... They failed.
Well, recently I have been messing about with the PC server in my school and found a "loophole" in the boot! :p
Basically my aim was to gain administrative access and I got administrative access!
Right, try this only if NO other methods work! =D
1)Boot the computer in your school, allow this to load ...
You must login or register to view this content.
2)Swich off via power source, (Plug, switch, yankin out wires, etc... )
3)Switch on the PC and then switch it back off whilst it is loading (before windows).
4)Power back on, but then hold down the power button on the computer until it's off again. notePress power button before windows boots!)
5)Then turn it on you should get this screen...
You must login or register to view this content.
If you don't, just repeat step 1-5 but do step 4 twice,
this should work!
6)Select "Safe Mode with command prompt" you may then get this...
You must login or register to view this content.
Followed by a giant login screen...
7)Login with the following...
... then press enter!
You should get this...
You must login or register to view this content.
YAY! :p
8.)type in the following...
...followed by enter...
...then...
...followed by enter!
9)Restart the computer, then log onto the computer with
not the server/network!
10)Enjoy your full Drive access for now... I am working on server access! :black:
Do some cool thing's! =D
in Start>Run>cmd
put in
enjoy starwars! :p
Okay, now Simple as to gain network access to any internet site...
Download this: You must login or register to view this content.
Extract and put onto USB, then plug into the PC in school, and run from the USB! (Don't put onto school drives).
Need any help?! Post below! :p
Windows XP and Windows 7 only! :p
Please post below if you have made this work on another version of windows! :y:
Disclamer: I am not resposible for the consequenses for you doing this, nor am I responsible for you getting banned... but do feel free to tell the banner that, Jimbo from NGU sent you! :carling:
Well, recently I have been messing about with the PC server in my school and found a "loophole" in the boot! :p
Basically my aim was to gain administrative access and I got administrative access!
Right, try this only if NO other methods work! =D
1)Boot the computer in your school, allow this to load ...
You must login or register to view this content.
2)Swich off via power source, (Plug, switch, yankin out wires, etc... )
3)Switch on the PC and then switch it back off whilst it is loading (before windows).
4)Power back on, but then hold down the power button on the computer until it's off again. note
Press power button before windows boots!)5)Then turn it on you should get this screen...
You must login or register to view this content.
If you don't, just repeat step 1-5 but do step 4 twice,
this should work!
6)Select "Safe Mode with command prompt" you may then get this...
You must login or register to view this content.
Followed by a giant login screen...
7)Login with the following...
username:administrator
password: ***Leave this blank***
... then press enter!
You should get this...
You must login or register to view this content.
YAY! :p
8.)type in the following...
net user administrator /active:no
...followed by enter...
...then...
net user administrator /active:yes
...followed by enter!
9)Restart the computer, then log onto the computer with
user: administrator
Pass:
not the server/network!
10)Enjoy your full Drive access for now... I am working on server access! :black:
Do some cool thing's! =D
in Start>Run>cmd
put in
telnet towel.blinkenlights.nl
enjoy starwars! :p
Okay, now Simple as to gain network access to any internet site...
Download this: You must login or register to view this content.
Extract and put onto USB, then plug into the PC in school, and run from the USB! (Don't put onto school drives).
Need any help?! Post below! :p
Windows XP and Windows 7 only! :p
Please post below if you have made this work on another version of windows! :y:
Disclamer: I am not resposible for the consequenses for you doing this, nor am I responsible for you getting banned... but do feel free to tell the banner that, Jimbo from NGU sent you! :carling:
I hate my school computers ... They are -Unhackable-
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
