Post: Need another homework done.Mini Project. Paying in Vbux
Options
08-13-2012, 06:30 AM
#1
zape
Can’t trickshot me!
one sheet of plain white paper
several sheets of old newspaper, or wax paper if available
one water-based marker (Note: do not use permanent marker)
one spray bottle containing water (place on “mist” setting)
digital camera, if available
Place several sheets of newspaper over a large flat surface, such as a kitchen counter. Use at least five sheets of paper so that you can protect your work area. If it is available, you may use wax paper instead of newspaper.
Crumple the sheet of white paper into a loose wad.
Uncrumple the sheet of paper so you can lay it on your work surface. The paper should not be flat, but should be wrinkled and puffed up from the crumpling.
Imagine the paper as a miniaturized version of mountains, hills, valleys, and other landscape features. If your paper is so flat that you can't imagine these features, you should recrumple it.
Use the marker to color the major folds or ridges in the paper, as well as some of the minor folds or ridges, as shown below. Do not allow the marker to color any other part of the paper.
Place the paper on top of the newspaper on the counter, and then lightly mist the piece of paper with the spray bottle. Don't spray too heavily: Three to seven squirts will probably do the job.
Stop misting as soon as you see some of the colored water starting to collect in some of the valleys. Watch for a few moments as stream patterns develop over the paper.
Work Starts here.
DATA AND OBSERVATIONS:
Write a very detailed description of your watershed model. Include observations based on the shape of the paper, behavior of water within your model and overall impressions. Be sure to use terminology from your lesson and your own words in this description. If you took pictures during the lab, be sure to include them below.
Should be very quick assignment. Nothing more then 20 minutes out of your time. No plagiarizing if you are going to do this .
Paying in vbux
08-13-2012, 08:21 PM
#2
Devil Child
Error… Cat invasion!
Originally posted by zape
MATERIALS AND PROCEDURES:
one sheet of plain white paper
several sheets of old newspaper, or wax paper if available
one water-based marker (Note: do not use permanent marker)
one spray bottle containing water (place on “mist” setting)
digital camera, if available
Place several sheets of newspaper over a large flat surface, such as a kitchen counter. Use at least five sheets of paper so that you can protect your work area. If it is available, you may use wax paper instead of newspaper.
Crumple the sheet of white paper into a loose wad.
Uncrumple the sheet of paper so you can lay it on your work surface. The paper should not be flat, but should be wrinkled and puffed up from the crumpling.
Imagine the paper as a miniaturized version of mountains, hills, valleys, and other landscape features. If your paper is so flat that you can't imagine these features, you should recrumple it.
Use the marker to color the major folds or ridges in the paper, as well as some of the minor folds or ridges, as shown below. Do not allow the marker to color any other part of the paper.
Place the paper on top of the newspaper on the counter, and then lightly mist the piece of paper with the spray bottle. Don't spray too heavily: Three to seven squirts will probably do the job.
Stop misting as soon as you see some of the colored water starting to collect in some of the valleys. Watch for a few moments as stream patterns develop over the paper.
Work Starts here.
DATA AND OBSERVATIONS:
Write a very detailed description of your watershed model. Include observations based on the shape of the paper, behavior of water within your model and overall impressions. Be sure to use terminology from your lesson and your own words in this description. If you took pictures during the lab, be sure to include them below.
Should be very quick assignment. Nothing more then 20 minutes out of your time. No plagiarizing if you are going to do this .
Paying in vbux[/QUOTEhow many vbux
one sheet of plain white paper
several sheets of old newspaper, or wax paper if available
one water-based marker (Note: do not use permanent marker)
one spray bottle containing water (place on “mist” setting)
digital camera, if available
Place several sheets of newspaper over a large flat surface, such as a kitchen counter. Use at least five sheets of paper so that you can protect your work area. If it is available, you may use wax paper instead of newspaper.
Crumple the sheet of white paper into a loose wad.
Uncrumple the sheet of paper so you can lay it on your work surface. The paper should not be flat, but should be wrinkled and puffed up from the crumpling.
Imagine the paper as a miniaturized version of mountains, hills, valleys, and other landscape features. If your paper is so flat that you can't imagine these features, you should recrumple it.
Use the marker to color the major folds or ridges in the paper, as well as some of the minor folds or ridges, as shown below. Do not allow the marker to color any other part of the paper.
Place the paper on top of the newspaper on the counter, and then lightly mist the piece of paper with the spray bottle. Don't spray too heavily: Three to seven squirts will probably do the job.
Stop misting as soon as you see some of the colored water starting to collect in some of the valleys. Watch for a few moments as stream patterns develop over the paper.
Work Starts here.
DATA AND OBSERVATIONS:
Write a very detailed description of your watershed model. Include observations based on the shape of the paper, behavior of water within your model and overall impressions. Be sure to use terminology from your lesson and your own words in this description. If you took pictures during the lab, be sure to include them below.
Should be very quick assignment. Nothing more then 20 minutes out of your time. No plagiarizing if you are going to do this .
Paying in vbux[/QUOTEhow many vbux
08-13-2012, 08:47 PM
#3
The Clipse
Dame Los Nuggets Plz
08-13-2012, 09:13 PM
#4
zape
Can’t trickshot me!
Originally posted by WalterWhite
Originally posted by zape
MATERIALS AND PROCEDURES:
one sheet of plain white paper
several sheets of old newspaper, or wax paper if available
one water-based marker (Note: do not use permanent marker)
one spray bottle containing water (place on “mist” setting)
digital camera, if available
Place several sheets of newspaper over a large flat surface, such as a kitchen counter. Use at least five sheets of paper so that you can protect your work area. If it is available, you may use wax paper instead of newspaper.
Crumple the sheet of white paper into a loose wad.
Uncrumple the sheet of paper so you can lay it on your work surface. The paper should not be flat, but should be wrinkled and puffed up from the crumpling.
Imagine the paper as a miniaturized version of mountains, hills, valleys, and other landscape features. If your paper is so flat that you can't imagine these features, you should recrumple it.
Use the marker to color the major folds or ridges in the paper, as well as some of the minor folds or ridges, as shown below. Do not allow the marker to color any other part of the paper.
Place the paper on top of the newspaper on the counter, and then lightly mist the piece of paper with the spray bottle. Don't spray too heavily: Three to seven squirts will probably do the job.
Stop misting as soon as you see some of the colored water starting to collect in some of the valleys. Watch for a few moments as stream patterns develop over the paper.
Work Starts here.
DATA AND OBSERVATIONS:
Write a very detailed description of your watershed model. Include observations based on the shape of the paper, behavior of water within your model and overall impressions. Be sure to use terminology from your lesson and your own words in this description. If you took pictures during the lab, be sure to include them below.
Should be very quick assignment. Nothing more then 20 minutes out of your time. No plagiarizing if you are going to do this .
Paying in vbux[/QUOTEhow many vbux
one sheet of plain white paper
several sheets of old newspaper, or wax paper if available
one water-based marker (Note: do not use permanent marker)
one spray bottle containing water (place on “mist” setting)
digital camera, if available
Place several sheets of newspaper over a large flat surface, such as a kitchen counter. Use at least five sheets of paper so that you can protect your work area. If it is available, you may use wax paper instead of newspaper.
Crumple the sheet of white paper into a loose wad.
Uncrumple the sheet of paper so you can lay it on your work surface. The paper should not be flat, but should be wrinkled and puffed up from the crumpling.
Imagine the paper as a miniaturized version of mountains, hills, valleys, and other landscape features. If your paper is so flat that you can't imagine these features, you should recrumple it.
Use the marker to color the major folds or ridges in the paper, as well as some of the minor folds or ridges, as shown below. Do not allow the marker to color any other part of the paper.
Place the paper on top of the newspaper on the counter, and then lightly mist the piece of paper with the spray bottle. Don't spray too heavily: Three to seven squirts will probably do the job.
Stop misting as soon as you see some of the colored water starting to collect in some of the valleys. Watch for a few moments as stream patterns develop over the paper.
Work Starts here.
DATA AND OBSERVATIONS:
Write a very detailed description of your watershed model. Include observations based on the shape of the paper, behavior of water within your model and overall impressions. Be sure to use terminology from your lesson and your own words in this description. If you took pictures during the lab, be sure to include them below.
Should be very quick assignment. Nothing more then 20 minutes out of your time. No plagiarizing if you are going to do this .
Paying in vbux[/QUOTEhow many vbux
How much you are looking for. And you dont have to take pictures
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
