(adsbygoogle = window.adsbygoogle || []).push({}); You must login or register to view this content.


HOW TO ADD/SWAP TURBOS TO ANY CAR

So, you guys may be thinking, wasn't this already possible? Well yes, but it required a FF turbo code. This is an actual swap. The car above has a Supra Mid RPM Turbo in it. And the hp shows it.

This will require Bruteforce/HxD

I'll be doing this with a Nissan Fairlady Z (Z34) '08 (p)
This car is supercharged, but I'd love for it to have the sound of the Blitz Dunlop R34, which won't happen since it doesn't have a turbo.

So first, get the car. You can go to GT Auto and change it visually but I wouldn't do an oil change yet.

Open the file in Bruteforce/HxD
change the first FF after the body code to 74, the same way you do a swap.

You must login or register to view this content.

Find the turbo code (091D if the car doesn't have a turbo option)
I changed it to a Supra Super High RPM Turbo. If you can't find the turbo code, open the save in garage editor 1.3, go to riding car, and get the turbo code that way. Then just search the car parameter in HxD until you find it.

You must login or register to view this content.

Now, usually that would be it, but for turbo you also have to change the code for the Turbo Controller.
For me, it starts directly above where I would go to slam a car. It's 6 bytes long, and is usually all 00 if the car doesnt have turbos. Should be around offset 0000E960. I used a Supra Super High RPM Turbo Controller.

You must login or register to view this content.

Now you can save changes. Encrypt it and do any other swaps you want in garage editor or continue in HxD, or just go to GT5. Enjoy.

Here are some Supra turbo codes.

Supra Stock Turbo- 00000934
Supra Stock Turbo Controller- 02197D063269

Supra Low RPM Turbo- 00000BDF
Supra Low RPM Turbo Controller- 082C73000000

Supra Mid RPM Turbo- 00000D74
Supra Mid RPM Turbo Controller- 082C73000000

Supra High RPM Turbo- 00000F18
Supra High RPM Turbo Controller- 083673000000

Supra Super High RPM Turbo- 00000FE0
Supra Super High RPM Turbo Controller- 0C126415234B

04 blitz ER34 codes
High RPM turbo code: 00000DA4
High RPM turbo controller :03337D000000

GT-R Black Ed High RPM Turbo- 0000156A
Controller- 063B78000000

GT-R Concept LM Super High RPM Turb0- 00000F8C
Controller- 071773132D50


Warning, the Super High RPM Turbo will give cars a lot of hp depending on the engine. Be warned.

And here is the car.

You must login or register to view this content.

You must login or register to view this content.

Notice the turbo meter.



HOW TO ADD/SWAP SUPERCHARGERS TO ANY CAR

This will be a little different. Cars that don't have a supercharger option won't have a code (Like 09 1D for non-turbo cars). Instead, it will be FFFFFFFF. You may want to add all the parts before hand just to narrow it down some. I won't be doing that in this tutorial, but I will try to make it as clear as possible on where the location will be in your save.

I will be adding a Ford GT supercharger (code is 00 8C) to a mazda RX-7 premium.

Here is where I found the supercharger in my Ford GT.

You must login or register to view this content.

First, you would buy the car you want a supercharger in. Open that car in HxD and do the same 74 in the first FF after the body code like you would do for any swap. Then go to the supercharger location. It should be around the offset 0000E910. I went ahead and changed it to the supercharger. In a stock car, you should see a row of code in with the FFs. The codes I see in every car are 0000002C 00000010 and then the 4 bytes of the body code. Use those as a sign to where the supercharger is. The supercharger should be the first FF FF FF FF you see.

You must login or register to view this content.

As an extra step, I also took the stock turbo off. You don't have to do this, I just did it so I didn't have a turbo and supercharger.
All you have to do for this is change the turbo code to 09 1D and then the controller to 00 00 00 00 00 00. Just like you would find in a n/a car.

You must login or register to view this content.

And as you can see here it worked. 330hp with just a supercharger in it.

You must login or register to view this content.

I hope this helps anyone who was asking for supercharger swaps haha.

And again, the Ford GT Supercharger code is 00 8C.

I'm not quite sure if this will have any effect on the sound of the car, as I have yet to drive it fully tuned.

Enjoy

Use the ZONDA LM RACE CAR high rpm turbo , you can get crazy hp.
trust me, even bigger than the r35 12 one's

but you need the exact code , I have to find back with my notebook computer...
because there are 100 saves record....
I can't find it right now .... I am browsing with my Nokia phone :dumb:

Of course I know.
my old method was copy.
watch the link above ....
or this one

You must login or register to view this content.


I can do it ... If only just Copy and paste.



I mean
for example
supra stock car
stock turbo and stock controller

the other one is supra stock car with X2011 turbo controller

the second one has less power but the boost will be full even at low rpm.

which means the turbo is not the only one value affect Horsepower but also the boost controller.

but I definitely know nothing about the values of those codes.
which is 1.0 bar , which is 2.5 bar max , which is full boost at whole time.
some boost controller only weights 3 digits ( AA BB CC 00 00 00 00 00)
e.g. 05 38 73 00
some of them have 6 !
(AA BB CC DD EE FF)
I am still know nothing about that value :dumb:




I made the 911 Turbo (996)
with a ultra high rpm turbo but a X2011 controller to make that car has full boost any time

you can see my photos at the link...
or I post it here ,
the F10 with Zonda LM high RPM turbo
it cannot be full boost after 15000rpm

You must login or register to view this content.



but the X2011 can, even used the engine LV 5 ( from Ek9 Civic) it raise up over 17000rpm , it still full boost.




and if anyone use 00 00 00 00 etc at the controller, it will raise up the power but there's no gauge shown.


Also I have done something crazy in the past...


You must login or register to view this content.

I made the Acura NSX RM become Honda NSX GT1 Turbo
even the Manufacturer Searching is Honda , and the logo on list is Honda too! :lol:



and this kind of crazy thing

You must login or register to view this content.
You must login or register to view this content.




adding a ultra high rpm turbo with a ELECTRICALLY POWERED engine
LOL

p.s. Some cars can be installed Both SC and Turbo , but you cannot click any of the Boxes on low rpm turbo , middle , high or "Stock" part or you would have remove them.
I made twin charge for my little cars...


if your car cannot be added a turbo
the page is still forbidden, but you can check out the power ,rpm , torque and the whole tuning list , you could find it out.

if Turbo car changed to NA
some times it will have no ticks in any boxes near the turbo list, some would have taken the "stock" one.
don't touch it.
and , don't forget to remove the Boost gauge if you make it NA.

I am Fucking Lazy


I hope you know what I meant
I copy the "work" from march I have found.
I changed the List of the turbo too
(Shown as no ticked in the box , where my save lies on the E830 place , near the Brake , weight lv or engine lv)
if you didn't change the value , you can "Still buy the Weight or engine Lv 3 and that object has no ticked at shop.
but of course you cannot buy it any more.
If you change the value , it would have shown that you have bought it , that you cannot even click on, will aviod you once buy it and change back the (power / weight) value of a car.

let's give you a photo , you would have known it, as you are a realistic tuner.
You must login or register to view this content.

82 is Racing Brake , of course there is a brake code you have to copy it out
at E830 (04) 08 is weight down level 0 , the Weight Down Lv 5 should be F9 and level 4 is 79
50 is the Engine lv 0...

of course that is just my save. In your save, because of the Byte different , you may lies on E850
as your 74 FF lies on E890 but mine is E870.





X2011 15 5A / 14 AA 78
Mini 11 DLC 15 55 / 03 19 5F

ACR SC E8F0 (0A-0D) 00 00 00 89
Zonda-HT 0E BA 05 35 78

R34 Ultra
E830 06 = 2F , 11FE , 0E 17 5F
659ps/7500rpm
71.7kgm/4500rpm


R34 Super
E830 06 = 3F , 0FB4 , 0E 17 5F =
655ps/7500rpm
65.5kgm/5000rpm


Zonda LM SHT
1D / 0F BC / 0F 32 5A
Engine : 06 84 / 0699 sound


Z32 SHT:
E830 06 (11)
0F 86 / 0C 12 64 12 24 50
271ps/6200rpm > 613/7200rpm
38.9kgm/3600rpm > 66.1/5600rpm

Z32 UHT
E830 06 (31)
11 CE / 0C 12 64 12 24 50
271ps/6200rpm > 600/7200rpm
38.9kgm/3600rpm > 68.1/5600rpm









Sounds means engine Sound.

What does the Boost Controller do O.o?

Ive been doing it with 14B - 1 Byte A8 - 4 Bytes 27 - 3 Bytes.

actually about the turbo boost of a car.
not only just a gauge

Has anyone tried a GTO twin turbo mr 98?
What is the turbo controller please ?

Try it yourself?

We need a full tutorial on not only swapping turbos/superchargers but stage 5 engine, stage 5 weight reduction, triple plate clutches, itbs, a full carbon brakes.. Please if anyone can help need to know where to place hex codes.. So I can fully modify a 14' Chevrolet stingray