Post: 3.70 downgrade
Options
09-13-2011, 10:04 PM
#1
Xx_Chobits_xX
Grunt
The following user groaned Xx_Chobits_xX for this awful post:
09-14-2011, 04:30 AM
#11
Mr.Major
Need something? Just ask!
Originally posted by ogel2
as far as i know, yes. its still need a soldering. i read it on FAQ at their sites :
"Q2: How about installation for fat and slim ps3 console?
The limited version need solder 34 wires on NAND FLASH FAT CONSOLE, it need use E3 LINKER.
The limited version need solder 50 wires on NOR FLASH FAT CONSOLE,it need use E3 LINKER.
The limited version need solder some points on NOR FLASH SLIM CONSOLE, no need any wire."
You must login or register to view this content.
"Q2: How about installation for fat and slim ps3 console?
The limited version need solder 34 wires on NAND FLASH FAT CONSOLE, it need use E3 LINKER.
The limited version need solder 50 wires on NOR FLASH FAT CONSOLE,it need use E3 LINKER.
The limited version need solder some points on NOR FLASH SLIM CONSOLE, no need any wire."
You must login or register to view this content.
You don't have to solder anything if you're using a E3 Flasher with a slim, but if you're using a fat you will have to solder.
09-14-2011, 04:41 AM
#12
ogel2
Haxor!
Originally posted by Mr.Major
You don't have to solder anything if you're using a E3 Flasher with a slim, but if you're using a fat you will have to solder.
well, i just read on their site they "need solder some points on NOR FLASH SLIM CONSOLE" but we don't need any wire. i also see soldering in their Slim installation manual...
"Solder sequence Solder SBCE point first, and solder SBE to fix soft board. If you can watch all testing point in front it means correct location. And then solder VCC BVCC GND etc, please note those point need heat little more time because of mainboard technology. And then solder other point."
its on page 11 in the PDF
09-14-2011, 05:00 AM
#13
Pichu
PICHU.
PICHU.
Originally posted by ogel2
Yea, there was a thread a while ago about this when the method was released. I still wouldn't do it, one mess up and you may screw up your system. Not worth it, just go on Ebay and find one that is under 3.55 or find a friend that hasn't updated theirs and buy it.
09-14-2011, 05:21 AM
#14
ogel2
Haxor!
Originally posted by Sublimity
Yea, there was a thread a while ago about this when the method was released. I still wouldn't do it, one mess up and you may screw up your system. Not worth it, just go on Ebay and find one that is under 3.55 or find a friend that hasn't updated theirs and buy it.
yes, i thought so. if we desperated to have ps3 under 3.55 while on 3.70, just sell the 3.70 and buy another 3.55
the cost would be fair enough. unless we have enough skill to do those downgrading things, and want to hit SONY in the head about their unhacked stuff...
09-14-2011, 05:28 AM
#15
Pichu
PICHU.
PICHU.
Originally posted by ogel2
yes, i thought so. if we desperated to have ps3 under 3.55 while on 3.70, just sell the 3.70 and buy another 3.55 the cost would be fair enough. unless we have enough skill to do those downgrading things, and want to hit SONY in the head about their unhacked stuff...
the cost would be fair enough. unless we have enough skill to do those downgrading things, and want to hit SONY in the head about their unhacked stuff...
They are counteracting it with new games requiring 3.60 and stuff firmware. But stay offline and spoof everything and you remain fine. I personally wouldn't mind downloading 15 games to play offline versus playing online for 1 or 2 games.
09-14-2011, 02:22 PM
#17
MagicMickey
I defeated!
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
