(adsbygoogle = window.adsbygoogle || []).push({}); Ps3: CECH-L01
lowest firmware 2.56(i believe)

Alright so i got my e3 flasher installed and it is on.
I dont know if it is working but the esata station works fine and boots up the xmb on the ps3 through the hard drive.
Now at first installation i couldn't make it read the hard drive so i re installed it and pushed the tf board farther on which worked.
So now i get a constant blue light, is that supposed to be there(on the tf board when the ps3 is on)?
Also when i try to update the flasher/board it wont work?
And then i try to back up, but it just blinks the first led.

So:
1. To upgrade can i use the samsung .bin?
2. To back up do i use the e3downgrade.bin?
3. My micro SD is 16 Gb does that matter?
4. Any other help?

If you need pictures or video tell me.

good luck with downgrading i downgraded mine with no problem using the e3 flasher using this guide You must login or register to view this content. and my ps3 model is cech2501a.

Nope, just gonna buy me a slim.

If your still having trouble add me on skype: LiamAngioy or pm me and i'll help

Had the same problem bro! what i did was each time i was going to change the TF switches i turned my PS3 off --> disconnect all cables then insert the SD card and choose the switches --> plug inn all the cables and turn on and wait until you are on XMB then click start! that was what i had to do to be able to use my E3 Flasher... hope i helped.

the problem is either ur TF Card pins or the micro sd card ur using!!! I noticed u sed u were using a 16GB?! The Tf Card Reader only reads up2 4GB MAX! So use a $GB or under sd and your good to go ;-)

I've been using an 8gb sd card no problems here

I think its dependant on the e3 update.bin u use? I downgrade mutiple consoles per day so i prefer to use the old version.