(adsbygoogle = window.adsbygoogle || []).push({}); My jailbroken ps3 has never had any problems until recently. I needed to spoof it to 4.76 and ended up downloading these different pkg and nothing worked . Long story short finally found a good one and after deleting all the other ones that didn't work my fan is no going at 100% in less then 10 minutes and shuts off. Now it may be just a coincidence or maybe one of the pkg messed me up I'm not to sure. I download a fan controller but doesn't do any good. I've blown out the ps3 taken it apart and done everything but replace the thermal paste. Sounds like a jet engine taking off in my room . Thanks to anyone who helps. Cheers

It shuts off, I can turn it on for 10 minutes but then cuts off again. I'll give a fan a try before taking it apart.

I installed and set my fan settings but it gets so hot that the fan will kick to 100% but the temperature still gets way to high. 82c°

You make have to take it apart just to dust it. If you don't feel comfortable changing the thermal paste you can have a tech do it for you, but getting the dust out should be easy enough.

You'll need some compressed air, a screw driver and a little time but you can do it.

turn fan speed up with webman
or re do your ps3 thermal paste
if ps3 still gets to high temps you would want to take the ihs plates off the gpu and cpu and repaste under them

my self i dont like a ps3 that gos over 70c

i always go for about 45c - 55c on my ps3s

Apply some fresh thermal paste that should do the job, I agree with dro on that

yes he should use artic silver 5 thermal paste

and if that dont do the trick he will need to have the paste re done under the ihs plates