Post: [Legit Video] PS Downgrade + File Leak + Tutorial
Options
11-15-2010, 11:53 PM
#1
NextGenTactics
Banned
Here is the leaked file for the psdowngrade with setup instructions and how to use it.
The files used to flash the PSDowngrade and its readme have also leaked! These files are for a specific person’s dongle.
So there is no reason for the average user to try and flash them. However, they may be reversed, which would lead to a free method of downgrading.
The readme references files such as lv2diag.self and a modified 3.41 pup file.
For those of you that don’t know, lv2diag.self is the name of a file used in conjunction with Sony’s official Service Jig.
It seems the jailbreak team has reverse engineered that jig, this time around.
Instructions from the readme below:
Originally posted by another user
How to Install/ Use PS Updater
Installation
Step 1 - Download PS Updater
Step 2 - Click start button and type in the search bar UAC and click on User Account Control Settings listed above. Inside this menu please lower the settings to lowest priority, Save and restart the computer.
Step 3 - Unrar/Unzip and click on setup.exe
Step 4 - follow the steps by clicking next until you reach the point of setup where it asks you to plug in your device
Step 5 - plus in PS Jailbreak device and click next
Step 6 - choose Unknown Device #1 from the list and click next
Step 7 - click save to save the .ini file under the place it wants
Step 8 - Click install driver and now complete installation
USE
Step 1 - Open PS Updater application that install a shortcut on your desktop
Step 2 - Plug in PS Jailbreak and click My Serial (make sure it can recognize and find your serial number)
Step 3 - Click My coupons and enter the coupon code you received from your authorized reseller when purchasing PS Downgrader.
Step 4 - Save the download it prompts you with ( You will receive 2 files , a) Program (which is PS Jailbreak) and b) Downgrade (which is your downgrader)
Step 5 - Go install file choose the Downgrader file and click Update now
Step 6- After using PS Downgrade to lower your firmware please follow the above steps this time choosing to update file a) Program
Step 7 - Now your PS Jailbreak is back to a Modchip
Downgrader
requirement - PS Jailbreak USB Dongle , PS Downgrade Coupon that has been installed onto your PS Jailbreak Device, Modified 3.41 PUP , LV2Diag.self (file 1) and LV2Diag.self (file 2)
Step 1 - Insert PS Jailbreak device that has been reprogrammed as PS Downgrade into your console
Step 2 - Turn on console using same boot method as PS Jailbreak - Press Power then immediately press eject. You will see your console turn with PS Jailbreak lit up with red/green light followed by green only, Then it will turn off.
Step 3 - Turn on console to make sure you are in factory service mode. You will see a huge red box on the screen saying Factory Service Mode, once confirmed please turn off console and remove PS Downgrade Dongle
Step 4 - Program any blank usb with 2 files , A) modified 3.41 pup B) Lv2Diag.self (file 1) These must be the only files on the usb key and must be placed in the main directory of the flash drive.
Step 5 - Insert this new Flash drive into the right USB PORT of your console ( It must be placed in the outermost right port) and turn the console on. You will see black screen but you will see flashing lights on the console (yellow) and on your USB key
Step 6 - Wait 3 minutes for the system to install the old FW, towards the end the power button on the console will start flashing green and then your console will power off.
Step 7 - Remove the usb key and turn on the console , you will still be in factory service mode. Please verify you have downgraded successfully to version 3.41
Step 8 (Optional) - If you wish to downgrade to any older firmware you can not follow step 4,5,6 using any regular firmware PUP. (You do not need to use modified custom firmware now that you are on 3.41)
Step 9 - Insert flash drive back into PC , remove the PUP and Lv2Diag.self and install only LV2Diag.self (file 2) on the USB Flash Drive
Step 10 - Power on your console, after 10 seconds it will power off
Step 11 - Turn on your console with no USB inserted and you will be out of factory service mode into retail mode with your chosen firmware version installed.
JAilbreak your console and enjoy playing homebrew
Installation
Step 1 - Download PS Updater
Step 2 - Click start button and type in the search bar UAC and click on User Account Control Settings listed above. Inside this menu please lower the settings to lowest priority, Save and restart the computer.
Step 3 - Unrar/Unzip and click on setup.exe
Step 4 - follow the steps by clicking next until you reach the point of setup where it asks you to plug in your device
Step 5 - plus in PS Jailbreak device and click next
Step 6 - choose Unknown Device #1 from the list and click next
Step 7 - click save to save the .ini file under the place it wants
Step 8 - Click install driver and now complete installation
USE
Step 1 - Open PS Updater application that install a shortcut on your desktop
Step 2 - Plug in PS Jailbreak and click My Serial (make sure it can recognize and find your serial number)
Step 3 - Click My coupons and enter the coupon code you received from your authorized reseller when purchasing PS Downgrader.
Step 4 - Save the download it prompts you with ( You will receive 2 files , a) Program (which is PS Jailbreak) and b) Downgrade (which is your downgrader)
Step 5 - Go install file choose the Downgrader file and click Update now
Step 6- After using PS Downgrade to lower your firmware please follow the above steps this time choosing to update file a) Program
Step 7 - Now your PS Jailbreak is back to a Modchip
Downgrader
requirement - PS Jailbreak USB Dongle , PS Downgrade Coupon that has been installed onto your PS Jailbreak Device, Modified 3.41 PUP , LV2Diag.self (file 1) and LV2Diag.self (file 2)
Step 1 - Insert PS Jailbreak device that has been reprogrammed as PS Downgrade into your console
Step 2 - Turn on console using same boot method as PS Jailbreak - Press Power then immediately press eject. You will see your console turn with PS Jailbreak lit up with red/green light followed by green only, Then it will turn off.
Step 3 - Turn on console to make sure you are in factory service mode. You will see a huge red box on the screen saying Factory Service Mode, once confirmed please turn off console and remove PS Downgrade Dongle
Step 4 - Program any blank usb with 2 files , A) modified 3.41 pup B) Lv2Diag.self (file 1) These must be the only files on the usb key and must be placed in the main directory of the flash drive.
Step 5 - Insert this new Flash drive into the right USB PORT of your console ( It must be placed in the outermost right port) and turn the console on. You will see black screen but you will see flashing lights on the console (yellow) and on your USB key
Step 6 - Wait 3 minutes for the system to install the old FW, towards the end the power button on the console will start flashing green and then your console will power off.
Step 7 - Remove the usb key and turn on the console , you will still be in factory service mode. Please verify you have downgraded successfully to version 3.41
Step 8 (Optional) - If you wish to downgrade to any older firmware you can not follow step 4,5,6 using any regular firmware PUP. (You do not need to use modified custom firmware now that you are on 3.41)
Step 9 - Insert flash drive back into PC , remove the PUP and Lv2Diag.self and install only LV2Diag.self (file 2) on the USB Flash Drive
Step 10 - Power on your console, after 10 seconds it will power off
Step 11 - Turn on your console with no USB inserted and you will be out of factory service mode into retail mode with your chosen firmware version installed.
JAilbreak your console and enjoy playing homebrew
In addition, the official PS Jailbreak team announced via their website, the legitimacy of PS Downgrade. Stating their device now supports 3.42, 3.50 and beyond. However, I wouldn’t upgrade just yet, as this seems like just an advertising push for their downgrade, not actual support for 3.42 and 3.50.
The following 2 users say thank you to NextGenTactics for this useful post:
11-16-2010, 07:33 PM
#29
berkant1907
Bounty hunter
The following user thanked berkant1907 for this useful post:
11-16-2010, 08:19 PM
#30
mcstyle24
Gym leader
Originally posted by berkant1907
Lets hope it, They don`t sell any original psjailbreak+downgrader in The Netherlands
Exactly, and it’s their fault for being greedy. They should have known that not many would be able to afford $120, so when cloners started cloning the cloners raked it in.
They literally went with the sales model of selling a few for a lot rather than a lot for less. psjailbreak probably only sold a few hundred dongles whilst cloners have probably sold 100,000's
So lets see the difference
psjailbreak – £120 * 1000 = $120,000
cloners – $30 * 100,000 = $3,000,000
there we have it, by being greedy psjailbreak reduced their income by 90%!
and charging people to download extra software is absolutley dreadful customer care/support. Jailbreak is expensive enough. Their really cashing in and taking advantage of people. You’ve bought their product, they should be upgrading it for free. Thats exactly like Sony charging you to upgrade to new firmware. SHOCKING!!!
11-16-2010, 08:23 PM
#31
Geeqoh
Be the change you want to see in the world.
Originally posted by mcstyle24
Exactly, and it’s their fault for being greedy. They should have known that not many would be able to afford $120, so when cloners started cloning the cloners raked it in.
They literally went with the sales model of selling a few for a lot rather than a lot for less. psjailbreak probably only sold a few hundred dongles whilst cloners have probably sold 100,000's
So lets see the difference
psjailbreak – £120 * 1000 = $120,000
cloners – $30 * 100,000 = $3,000,000
there we have it, by being greedy psjailbreak reduced their income by 90%!
and charging people to download extra software is absolutley dreadful customer care/support. Jailbreak is expensive enough. Their really cashing in and taking advantage of people. You’ve bought their product, they should be upgrading it for free. Thats exactly like Sony charging you to upgrade to new firmware. SHOCKING!!!
They literally went with the sales model of selling a few for a lot rather than a lot for less. psjailbreak probably only sold a few hundred dongles whilst cloners have probably sold 100,000's
So lets see the difference
psjailbreak – £120 * 1000 = $120,000
cloners – $30 * 100,000 = $3,000,000
there we have it, by being greedy psjailbreak reduced their income by 90%!
and charging people to download extra software is absolutley dreadful customer care/support. Jailbreak is expensive enough. Their really cashing in and taking advantage of people. You’ve bought their product, they should be upgrading it for free. Thats exactly like Sony charging you to upgrade to new firmware. SHOCKING!!!
But the quality is different :bro:
11-16-2010, 08:38 PM
#32
club-bomb-shizl
Bounty hunter
" i got scammed buying one. Luckely i have à ps3key now.
11-30-2010, 08:01 AM
#36
Rainbow Dash
Now 20% Cooler
Originally posted by NextGenTactics
You must login or register to view this content.
Here is the leaked file for the psdowngrade with setup instructions and how to use it.
The files used to flash the PSDowngrade and its readme have also leaked! These files are for a specific person’s dongle.
So there is no reason for the average user to try and flash them. However, they may be reversed, which would lead to a free method of downgrading.
The readme references files such as lv2diag.self and a modified 3.41 pup file.
For those of you that don’t know, lv2diag.self is the name of a file used in conjunction with Sony’s official Service Jig.
It seems the jailbreak team has reverse engineered that jig, this time around.
Instructions from the readme below:
In addition, the official PS Jailbreak team announced via their website, the legitimacy of PS Downgrade. Stating their device now supports 3.42, 3.50 and beyond. However, I wouldn’t upgrade just yet, as this seems like just an advertising push for their downgrade, not actual support for 3.42 and 3.50.
Here is the leaked file for the psdowngrade with setup instructions and how to use it.
The files used to flash the PSDowngrade and its readme have also leaked! These files are for a specific person’s dongle.
So there is no reason for the average user to try and flash them. However, they may be reversed, which would lead to a free method of downgrading.
The readme references files such as lv2diag.self and a modified 3.41 pup file.
For those of you that don’t know, lv2diag.self is the name of a file used in conjunction with Sony’s official Service Jig.
It seems the jailbreak team has reverse engineered that jig, this time around.
Instructions from the readme below:
In addition, the official PS Jailbreak team announced via their website, the legitimacy of PS Downgrade. Stating their device now supports 3.42, 3.50 and beyond. However, I wouldn’t upgrade just yet, as this seems like just an advertising push for their downgrade, not actual support for 3.42 and 3.50.
Weres the Modified 3.41 PUP and the Lv2diag.self ?
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
