Post: PS3 Downgrade TI-84 [easy tut]
Options
12-09-2010, 03:37 PM
#1
Jamaicanmecrazy
Who Am I ?
1. Install the PS3JB App (v. 0.08.0001)
2. Open the PS3JB App on your calculator. (APPS->PS3JB)
3. Choose Option "5" (Options)
4. Make sure "Stage 1 and Stage 2 Payloads" is set to "none". Make sure "FW. Compat. Opts" is set to "none". Make sure "Use Device 6" is set to "No".
5. MAKE SURE "EMULATE JIG" IS SET TO YES
6. Save your configuration.
7. Connect your calculator to your PS3 and press option "1" (PS3 Jailbreak) on your calculator.
8. Do the power cycle like you normally would to jailbreak your PS3.
9. You may see some screen flickers. You will not have a picture on your screen. The PS3 will shut itself off.
10. Format a USB flash drive. Make sure there is nothing left on the flash drive.
11. Copy over the modified 3.41 update (PS3UPDAT.PUP) and the first Lv2diag.self file onto the root of your flash drive. There should be nothing else but these two files on your flash drive.
12. Plug the flash drive into the right-most USB port if your PS3 is laying down, or the top USB port if it is standing up.
13. Power on the machine. Don't do the normal Jailbreak power cycle. Just power it on. You will get no picture. You will have to wait until it shuts itself off agin, which took me about 10 minutes. DO NOT get antsy and think it froze on you and shut it off prematurely. Give it up to an hour before doing anything drastic.
14. Once the PS3 shuts itself off again, plug your flash drive back into your computer again and delete the "PS3UPDAT.DAT" and the "Lv2diag.self" files. Once deleted, copy over the second Lv2diag.self file to the root of your flash drive. Again, this should be the only file on your flash drive.
15. Once the file is on your flash drive, plug it into the same port you had it in before in your PS3 and turn the power on. Again, just a normal power on, no Jailbreak power cycle.
16. It will stay at a black screeen until it is ready and then shut itself off. Once that is done, remove your flash drive.
Congratulations! You are now done!
The following 13 users say thank you to Jamaicanmecrazy for this useful post:
12-12-2010, 07:33 PM
#20
Ritztro
I am a Game Developer
Originally posted by Jamaicanmecrazy
HOW TO DOWNGRADE:
1. Install the PS3JB App (v. 0.08.0001)
2. Open the PS3JB App on your calculator. (APPS->PS3JB)
3. Choose Option "5" (Options)
4. Make sure "Stage 1 and Stage 2 Payloads" is set to "none". Make sure "FW. Compat. Opts" is set to "none". Make sure "Use Device 6" is set to "No".
5. MAKE SURE "EMULATE JIG" IS SET TO YES
6. Save your configuration.
7. Connect your calculator to your PS3 and press option "1" (PS3 Jailbreak) on your calculator.
8. Do the power cycle like you normally would to jailbreak your PS3.
9. You may see some screen flickers. You will not have a picture on your screen. The PS3 will shut itself off.
10. Format a USB flash drive. Make sure there is nothing left on the flash drive.
11. Copy over the modified 3.41 update (PS3UPDAT.PUP) and the first Lv2diag.self file onto the root of your flash drive. There should be nothing else but these two files on your flash drive.
12. Plug the flash drive into the right-most USB port if your PS3 is laying down, or the top USB port if it is standing up.
13. Power on the machine. Don't do the normal Jailbreak power cycle. Just power it on. You will get no picture. You will have to wait until it shuts itself off agin, which took me about 10 minutes. DO NOT get antsy and think it froze on you and shut it off prematurely. Give it up to an hour before doing anything drastic.
14. Once the PS3 shuts itself off again, plug your flash drive back into your computer again and delete the "PS3UPDAT.DAT" and the "Lv2diag.self" files. Once deleted, copy over the second Lv2diag.self file to the root of your flash drive. Again, this should be the only file on your flash drive.
15. Once the file is on your flash drive, plug it into the same port you had it in before in your PS3 and turn the power on. Again, just a normal power on, no Jailbreak power cycle.
16. It will stay at a black screeen until it is ready and then shut itself off. Once that is done, remove your flash drive.
Congratulations! You are now done!
1. Install the PS3JB App (v. 0.08.0001)
2. Open the PS3JB App on your calculator. (APPS->PS3JB)
3. Choose Option "5" (Options)
4. Make sure "Stage 1 and Stage 2 Payloads" is set to "none". Make sure "FW. Compat. Opts" is set to "none". Make sure "Use Device 6" is set to "No".
5. MAKE SURE "EMULATE JIG" IS SET TO YES
6. Save your configuration.
7. Connect your calculator to your PS3 and press option "1" (PS3 Jailbreak) on your calculator.
8. Do the power cycle like you normally would to jailbreak your PS3.
9. You may see some screen flickers. You will not have a picture on your screen. The PS3 will shut itself off.
10. Format a USB flash drive. Make sure there is nothing left on the flash drive.
11. Copy over the modified 3.41 update (PS3UPDAT.PUP) and the first Lv2diag.self file onto the root of your flash drive. There should be nothing else but these two files on your flash drive.
12. Plug the flash drive into the right-most USB port if your PS3 is laying down, or the top USB port if it is standing up.
13. Power on the machine. Don't do the normal Jailbreak power cycle. Just power it on. You will get no picture. You will have to wait until it shuts itself off agin, which took me about 10 minutes. DO NOT get antsy and think it froze on you and shut it off prematurely. Give it up to an hour before doing anything drastic.
14. Once the PS3 shuts itself off again, plug your flash drive back into your computer again and delete the "PS3UPDAT.DAT" and the "Lv2diag.self" files. Once deleted, copy over the second Lv2diag.self file to the root of your flash drive. Again, this should be the only file on your flash drive.
15. Once the file is on your flash drive, plug it into the same port you had it in before in your PS3 and turn the power on. Again, just a normal power on, no Jailbreak power cycle.
16. It will stay at a black screeen until it is ready and then shut itself off. Once that is done, remove your flash drive.
Congratulations! You are now done!
you said the files were here. Where r they? Also can I jb 3.50?
12-12-2010, 09:38 PM
#22
Ritztro
I am a Game Developer
Originally posted by Jamaicanmecrazy
HOW TO DOWNGRADE:
1. Install the PS3JB App (v. 0.08.0001)
2. Open the PS3JB App on your calculator. (APPS->PS3JB)
3. Choose Option "5" (Options)
4. Make sure "Stage 1 and Stage 2 Payloads" is set to "none". Make sure "FW. Compat. Opts" is set to "none". Make sure "Use Device 6" is set to "No".
5. MAKE SURE "EMULATE JIG" IS SET TO YES
6. Save your configuration.
7. Connect your calculator to your PS3 and press option "1" (PS3 Jailbreak) on your calculator.
8. Do the power cycle like you normally would to jailbreak your PS3.
9. You may see some screen flickers. You will not have a picture on your screen. The PS3 will shut itself off.
10. Format a USB flash drive. Make sure there is nothing left on the flash drive.
11. Copy over the modified 3.41 update (PS3UPDAT.PUP) and the first Lv2diag.self file onto the root of your flash drive. There should be nothing else but these two files on your flash drive.
12. Plug the flash drive into the right-most USB port if your PS3 is laying down, or the top USB port if it is standing up.
13. Power on the machine. Don't do the normal Jailbreak power cycle. Just power it on. You will get no picture. You will have to wait until it shuts itself off agin, which took me about 10 minutes. DO NOT get antsy and think it froze on you and shut it off prematurely. Give it up to an hour before doing anything drastic.
14. Once the PS3 shuts itself off again, plug your flash drive back into your computer again and delete the "PS3UPDAT.DAT" and the "Lv2diag.self" files. Once deleted, copy over the second Lv2diag.self file to the root of your flash drive. Again, this should be the only file on your flash drive.
15. Once the file is on your flash drive, plug it into the same port you had it in before in your PS3 and turn the power on. Again, just a normal power on, no Jailbreak power cycle.
16. It will stay at a black screeen until it is ready and then shut itself off. Once that is done, remove your flash drive.
Congratulations! You are now done!
1. Install the PS3JB App (v. 0.08.0001)
2. Open the PS3JB App on your calculator. (APPS->PS3JB)
3. Choose Option "5" (Options)
4. Make sure "Stage 1 and Stage 2 Payloads" is set to "none". Make sure "FW. Compat. Opts" is set to "none". Make sure "Use Device 6" is set to "No".
5. MAKE SURE "EMULATE JIG" IS SET TO YES
6. Save your configuration.
7. Connect your calculator to your PS3 and press option "1" (PS3 Jailbreak) on your calculator.
8. Do the power cycle like you normally would to jailbreak your PS3.
9. You may see some screen flickers. You will not have a picture on your screen. The PS3 will shut itself off.
10. Format a USB flash drive. Make sure there is nothing left on the flash drive.
11. Copy over the modified 3.41 update (PS3UPDAT.PUP) and the first Lv2diag.self file onto the root of your flash drive. There should be nothing else but these two files on your flash drive.
12. Plug the flash drive into the right-most USB port if your PS3 is laying down, or the top USB port if it is standing up.
13. Power on the machine. Don't do the normal Jailbreak power cycle. Just power it on. You will get no picture. You will have to wait until it shuts itself off agin, which took me about 10 minutes. DO NOT get antsy and think it froze on you and shut it off prematurely. Give it up to an hour before doing anything drastic.
14. Once the PS3 shuts itself off again, plug your flash drive back into your computer again and delete the "PS3UPDAT.DAT" and the "Lv2diag.self" files. Once deleted, copy over the second Lv2diag.self file to the root of your flash drive. Again, this should be the only file on your flash drive.
15. Once the file is on your flash drive, plug it into the same port you had it in before in your PS3 and turn the power on. Again, just a normal power on, no Jailbreak power cycle.
16. It will stay at a black screeen until it is ready and then shut itself off. Once that is done, remove your flash drive.
Congratulations! You are now done!
I downgraded but I cant jailbreak...
12-12-2010, 11:09 PM
#24
grayshark95
A.K.A. Gray_the Wolf
12-13-2010, 09:31 PM
#26
whiteboyshot
Bounty hunter
Originally posted by Jamaicanmecrazy
HOW TO DOWNGRADE:
1. Install the PS3JB App (v. 0.08.0001)
2. Open the PS3JB App on your calculator. (APPS->PS3JB)
3. Choose Option "5" (Options)
4. Make sure "Stage 1 and Stage 2 Payloads" is set to "none". Make sure "FW. Compat. Opts" is set to "none". Make sure "Use Device 6" is set to "No".
5. MAKE SURE "EMULATE JIG" IS SET TO YES
6. Save your configuration.
7. Connect your calculator to your PS3 and press option "1" (PS3 Jailbreak) on your calculator.
8. Do the power cycle like you normally would to jailbreak your PS3.
9. You may see some screen flickers. You will not have a picture on your screen. The PS3 will shut itself off.
10. Format a USB flash drive. Make sure there is nothing left on the flash drive.
11. Copy over the modified 3.41 update (PS3UPDAT.PUP) and the first Lv2diag.self file onto the root of your flash drive. There should be nothing else but these two files on your flash drive.
12. Plug the flash drive into the right-most USB port if your PS3 is laying down, or the top USB port if it is standing up.
13. Power on the machine. Don't do the normal Jailbreak power cycle. Just power it on. You will get no picture. You will have to wait until it shuts itself off agin, which took me about 10 minutes. DO NOT get antsy and think it froze on you and shut it off prematurely. Give it up to an hour before doing anything drastic.
14. Once the PS3 shuts itself off again, plug your flash drive back into your computer again and delete the "PS3UPDAT.DAT" and the "Lv2diag.self" files. Once deleted, copy over the second Lv2diag.self file to the root of your flash drive. Again, this should be the only file on your flash drive.
15. Once the file is on your flash drive, plug it into the same port you had it in before in your PS3 and turn the power on. Again, just a normal power on, no Jailbreak power cycle.
16. It will stay at a black screeen until it is ready and then shut itself off. Once that is done, remove your flash drive.
Congratulations! You are now done!
1. Install the PS3JB App (v. 0.08.0001)
2. Open the PS3JB App on your calculator. (APPS->PS3JB)
3. Choose Option "5" (Options)
4. Make sure "Stage 1 and Stage 2 Payloads" is set to "none". Make sure "FW. Compat. Opts" is set to "none". Make sure "Use Device 6" is set to "No".
5. MAKE SURE "EMULATE JIG" IS SET TO YES
6. Save your configuration.
7. Connect your calculator to your PS3 and press option "1" (PS3 Jailbreak) on your calculator.
8. Do the power cycle like you normally would to jailbreak your PS3.
9. You may see some screen flickers. You will not have a picture on your screen. The PS3 will shut itself off.
10. Format a USB flash drive. Make sure there is nothing left on the flash drive.
11. Copy over the modified 3.41 update (PS3UPDAT.PUP) and the first Lv2diag.self file onto the root of your flash drive. There should be nothing else but these two files on your flash drive.
12. Plug the flash drive into the right-most USB port if your PS3 is laying down, or the top USB port if it is standing up.
13. Power on the machine. Don't do the normal Jailbreak power cycle. Just power it on. You will get no picture. You will have to wait until it shuts itself off agin, which took me about 10 minutes. DO NOT get antsy and think it froze on you and shut it off prematurely. Give it up to an hour before doing anything drastic.
14. Once the PS3 shuts itself off again, plug your flash drive back into your computer again and delete the "PS3UPDAT.DAT" and the "Lv2diag.self" files. Once deleted, copy over the second Lv2diag.self file to the root of your flash drive. Again, this should be the only file on your flash drive.
15. Once the file is on your flash drive, plug it into the same port you had it in before in your PS3 and turn the power on. Again, just a normal power on, no Jailbreak power cycle.
16. It will stay at a black screeen until it is ready and then shut itself off. Once that is done, remove your flash drive.
Congratulations! You are now done!
what is the norml power sequence you would do to normally downgrade your ps3?
12-14-2010, 12:05 AM
#27
danish_g35
Haxor!
Ok. Can someone pleaseeee help me out.. I think im doing something wrong heres the short video i made. [ame=https://www.youtube.com/watch?v=VwMUoQqL80U]YouTube - MOV02347[/ame] I tried it both by setting "Use Device 6" to no but it still didn't work, then i set it to yes and it still didn't work... Can someone help me out?
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
