(adsbygoogle = window.adsbygoogle || []).push({});
Ok guys. as you can see, there are a lots of threads that talks about how to downgrade a ps3 with a fw 3.56+.
now all these threads are fake!
You CAN'T downgrade with an eternet cable.
You CAN'T downgrade with a usb, just because sony has patched the old downgrade method.
You CAN'T downgrade with a usb dongle with some "codes", because your ps3 only accept the master key to enable factory mode (once you are in this mode you can't return to normal mode)
the only way to downgrade is through an external dumper/flasher.
now this is an old video, but it show how to use an external flasher.
Now to downgrade you also need a backup of a previous firmware, made with a nor/nand dumper (in that video they used the same flasher to backup their nand).
another way (for NOR flashing) is this:
Originally posted by defyboy
I built a flasher: You must login or register to view this content.
You can downgrade via this method but it involves patching out firmware hash checks in LV1
Before i was talking about why you can't downgrade with an ethernet cable or a usb dongle.
i will explain in details why:
(download this to follow my explanation *.PDF --> You must login or register to view this content. ) VirusTotal Scan:
Antivirus Version Last update Result
now you don't need to read all and you don't need to know everything in the pdf.
Now look the pdf while you are reading this:
The PS3 Turns on.
your ps3 starts to do some thing, like execute the SysCon --> CellBE --> .. things.. --> lvl2ldr.
The lvl2ldr in the old FW, with the old jailbreak/downgrade method, executed an external code from a USB that sent the GameOS in test/factory mode.
when sony has patched this, they blocked the execution of an external code different than the factory mode code.
Now look at the bottom of the page (ON THE PDF) you can see that the filesystem is loaded after the lvl0ldr (Top of the PDF, after CellBE).
the network board is available for the ps3 just when the filesystem is loaded.
In some threads they talks about using an ethernet to dump things, but this is impossible, because the CellBE (i.e. CPU) starts reading the NAND/NOR, not the network board.
if i wrong something or something is incomprehensible tell me and i will re-write it again.
Ok guys. as you can see, there are a lots of threads that talks about how to downgrade a ps3 with a fw 3.56+.
now all these threads are fake!
You CAN'T downgrade with an eternet cable.
You CAN'T downgrade with a usb, just because sony has patched the old downgrade method.
You CAN'T downgrade with a usb dongle with some "codes", because your ps3 only accept the master key to enable factory mode (once you are in this mode you can't return to normal mode)
the only way to downgrade is through an external dumper/flasher.
now this is an old video, but it show how to use an external flasher.
Now to downgrade you also need a backup of a previous firmware, made with a nor/nand dumper (in that video they used the same flasher to backup their nand).
another way (for NOR flashing) is this:
Before i was talking about why you can't downgrade with an ethernet cable or a usb dongle.
i will explain in details why:
(download this to follow my explanation *.PDF --> You must login or register to view this content. ) VirusTotal Scan:
Antivirus Version Last update Result
now you don't need to read all and you don't need to know everything in the pdf.
Now look the pdf while you are reading this:
The PS3 Turns on.
your ps3 starts to do some thing, like execute the SysCon --> CellBE --> .. things.. --> lvl2ldr.
The lvl2ldr in the old FW, with the old jailbreak/downgrade method, executed an external code from a USB that sent the GameOS in test/factory mode.
when sony has patched this, they blocked the execution of an external code different than the factory mode code.
Now look at the bottom of the page (ON THE PDF) you can see that the filesystem is loaded after the lvl0ldr (Top of the PDF, after CellBE).
the network board is available for the ps3 just when the filesystem is loaded.
In some threads they talks about using an ethernet to dump things, but this is impossible, because the CellBE (i.e. CPU) starts reading the NAND/NOR, not the network board.
if i wrong something or something is incomprehensible tell me and i will re-write it again.
Ok so does this cost any money for this....and is there a chance you can brick your ps3?
Ok so does this cost any money for this....and is there a chance you can brick your ps3?
you can brick your ps3, but you can also flash the ps3 again the only thing that you need to do before everything is just a backup of the original nand. if you do a bad flash, you can reflash the ps3 with the backup
Originally posted by jp4priest
hey im confused how do i downgrade then and stuff email me at [email][email protected][/email] or at [email][email protected][/email] please send me email iz be confused.
sorry.
i'm not going to email you; if you have some questions just write down here.
Originally posted by jordanth0721
Do u need all those wires and crap like in the vid
Ok guys. as you can see, there are a lots of threads that talks about how to downgrade a ps3 with a fw 3.56+.
now all these threads are fake!
You CAN'T downgrade with an eternet cable.
You CAN'T downgrade with a usb, just because sony has patched the old downgrade method.
You CAN'T downgrade with a usb dongle with some "codes", because your ps3 only accept the master key to enable factory mode (once you are in this mode you can't return to normal mode)
the only way to downgrade is through an external dumper/flasher.
now this is an old video, but it show how to use an external flasher.
Now to downgrade you also need a backup of a previous firmware, made with a nor/nand dumper (in that video they used the same flasher to backup their nand).
another way (for NOR flashing) is this:
Before i was talking about why you can't downgrade with an ethernet cable or a usb dongle.
i will explain in details why:
(download this to follow my explanation *.PDF --> You must login or register to view this content. ) VirusTotal Scan:
Antivirus Version Last update Result
now you don't need to read all and you don't need to know everything in the pdf.
Now look the pdf while you are reading this:
The PS3 Turns on.
your ps3 starts to do some thing, like execute the SysCon --> CellBE --> .. things.. --> lvl2ldr.
The lvl2ldr in the old FW, with the old jailbreak/downgrade method, executed an external code from a USB that sent the GameOS in test/factory mode.
when sony has patched this, they blocked the execution of an external code different than the factory mode code.
Now look at the bottom of the page (ON THE PDF) you can see that the filesystem is loaded after the lvl0ldr (Top of the PDF, after CellBE).
the network board is available for the ps3 just when the filesystem is loaded.
In some threads they talks about using an ethernet to dump things, but this is impossible, because the CellBE (i.e. CPU) starts reading the NAND/NOR, not the network board.
if i wrong something or something is incomprehensible tell me and i will re-write it again.