Post: ControlConsoleAPI 2.80 REV4 (CCAPI)
Options
11-11-2013, 05:34 PM
#1
FM|T Enstone
Bounty hunter
Current version : 2.80 REV4
Hello everyone,
CCAPI is a software that establishes a connection between your ps3 and your computer. You can control your ps3 from your pc. Some CCAPI functions:
Debug non-fself & fself in real time
Real time memory edit on CEX/DEX
Wire(less) connection
Module loading
Modify idps and psid
Edit console Leds
Ring console buzzer
Get ps3 temperature
...
Compatible firmwares:
CFW 4.21, 4.30, 4.40, 4.41, 4.46, 4.50, 4.53, 4.55, 4.60, 4.65, 4.70, 4.75 CEX or DEX + 4.66, 4.76 CEX or DEX
Cobra/Non-Cobra, 4.78 CEX or DEX, 4.80 CEX or DEX, 4.81 CEX or DEX, 4.82 CEX or DEX, 4.83 CEX
VSH module loading:
- create a directory in your /dev_usb000/ called plugins
and put all your sprx plugins into, it should be
/dev_usb000/plugins/prx_name1.sprx
/dev_usb000/plugins/prx_name2.sprx
....
All of the sprx that are present in this folder, will be loaded at ps3 boot.
Important: If some games refuse to work, just don't use plugins (delete plugins folder from /dev_usb000)
How to install CCAPI?
Just download and run the ccapi pkg on your ps3.
It will tell you to reboot, and it's done. You only need to do this once.
How to uninstall CCAPI?
Just run again the pkg.
Console Manager:
Add consoles (name/ip) usable in all ccapi tools
Virus scan:
You must login or register to view this content.
ChangeLog
- 2.80
(rev4) Added 4.83 CEX support
(rev3) Added 4.82 DEX support
(rev2) Reduced memory use
Added ps3 TOOL support (with DEX/CEX kernel only)
Added console finder into consolemanager
Added vsh menu
Added 4.82 CEX support
- 2.70
(rev6) Added 4.81 DEX support
(rev5) Added 4.81 CEX support
(rev4) Added 4.80 DEX support
(rev4) Added 4.80 CEX support
(rev3) Added 4.78 DEX support
(rev2) Added 4.78 CEX support
(rev2) Added 4.76 DEX support
Added other platform support
Optimized network bitrate
- 2.60
(rev7) Added 4.76 CEX support
(rev6) Added 4.75 DEX support
(rev5) Added 4.75 CEX support
(rev4) Added 4.70 DEX support
(rev3) Added 4.70 CEX support
(rev2) Added 4.66 CEX support
Added 4.60/4.65 support
Added Cobra support
Added SetBootPsid/SetBootIdps/SetPsid
- 2.50
Added 4.53/4.55 support
Added a console list
- 2.00
Reduced memory use
DLL (C++ / C#) released to build programs for ccapi
- 1.00
Original version
The following 871 users say thank you to FM|T Enstone for this useful post:
^TPP^, _HURT_, _L0st_my_Gh0st_, -Google-, Nath, -Numb, -SuperMan, !MixerxHD!, ..jigsaw, .MrRedDoT, {H} | Exception, {OM}1337{OM}, Jiggy, /SneakerStreet/, ❇❥⛺Cerberus⛺❤❇, マated, بومبو, Smooth, ＶＡＰ３Ｒ, Dynamite, One, Okami, ⓙω мσ∂z, ▶DaOriginal209◀, Nana, ☓-Dani-☓, Kappa, DIRTY SMASHER, ⚔Spanners⚔, #Dragoss, #Rage, 045Connection, 077407, 0xX0R, 0zersub, 192.168.1.1, 6jarjar6, A_Gen_Fiasco, abankmino, aburezk, AcidicSins, Adel500, AdnanM801, AdxmModz, ady05113, Ahmed.AK, Aitan7, AKONIT92, alboyiscool, Albus, alchybear, AlecKeaneDUB, aleeeex, alenbih, Alex_xbr, AlexNGU, Alexon, AleXta, Alf.Red, ALI ALHILFI, aliast, allant, AllMw2MoDz, alvieth, Amanda, Andr3wM, AndresKid, AndrewKills, angelo27093, animalovich, annern, Ansity., anxify, Aphelion09, Appreciate, arash_ashkan, Armyspy, Arrow_Modz, Asian, Ass Burgers, ateazy12, audi787b, mason, AutoModder, azooz121, Azus, B o n e, b3tl1ng, BadChoicesZ, bAdReQuEsT, BAGZY13B, BaileyisDope, bam509, bandphan, Bane., barelynotlegal and 771 other users.
11-21-2014, 07:04 PM
#812
Mitchliving
Haxor!
Originally posted by FarSideX
Mac's OSX does not use DLL files, they use dylib files.
Most low distribution apps such as mod tools are built for Windows due its market share. To use such things on your Mac you should use one of the many methods of running Windows apps on your Mac. My recommendation is to use Parallels as it allows better network compatibility than other solutions. If you use that when you set it up do not chose the default network adapter option but rather use the direct connection method. This will make the Windows and Mac sides appear as two separate hardware devices to your router and allow full port usage on both sides as no extra NAT layer is used but rather they will have separate IP addresses.
You could also use VMware's solution or WINE or crossover or whatever you prefer, results may vary. VMware player is free but requires manual set up for the environment you want.
Most low distribution apps such as mod tools are built for Windows due its market share. To use such things on your Mac you should use one of the many methods of running Windows apps on your Mac. My recommendation is to use Parallels as it allows better network compatibility than other solutions. If you use that when you set it up do not chose the default network adapter option but rather use the direct connection method. This will make the Windows and Mac sides appear as two separate hardware devices to your router and allow full port usage on both sides as no extra NAT layer is used but rather they will have separate IP addresses.
You could also use VMware's solution or WINE or crossover or whatever you prefer, results may vary. VMware player is free but requires manual set up for the environment you want.
I have a VMware so I will just use that.. So hang in there with me as I am pretty new to this.. I have a questions and Yes i've searched and I found the first part of my answer....
I have a Slim Cehe-2501a and I did the Firmware checker and it said "Your firmware can be downgrade to 3.40" Well, it said something like that. Heres were I am confused... Do i NEED an E3 Flasher with this Slim being that the OFW was 3.40 at one point? I understand if it was a console with a newer firmware (greater) >3.55 that it wouldn't work and I would need a E3 Flasher.
Are the flashers ONly for the slim? I know the Fats can be downgraded without em'...
If this need to be moved I understand, just figured I would ask here since i'm already here
11-21-2014, 07:06 PM
#813
FarSideX
I’m too L33T
Originally posted by Mitchliving
I have a VMware so I will just use that.. So hang in there with me as I am pretty new to this.. I have a questions and Yes i've searched and I found the first part of my answer....
I have a Slim Cehe-2501a and I did the Firmware checker and it said "Your firmware can be downgrade to 3.40" Well, it said something like that. Heres were I am confused... Do i NEED an E3 Flasher with this Slim being that the OFW was 3.40 at one point? I understand if it was a console with a newer firmware (greater) >3.55 that it wouldn't work and I would need a E3 Flasher.
Are the flashers ONly for the slim? I know the Fats can be downgraded without em'...
If this need to be moved I understand, just figured I would ask here since i'm already here
I have a Slim Cehe-2501a and I did the Firmware checker and it said "Your firmware can be downgrade to 3.40" Well, it said something like that. Heres were I am confused... Do i NEED an E3 Flasher with this Slim being that the OFW was 3.40 at one point? I understand if it was a console with a newer firmware (greater) >3.55 that it wouldn't work and I would need a E3 Flasher.
Are the flashers ONly for the slim? I know the Fats can be downgraded without em'...
If this need to be moved I understand, just figured I would ask here since i'm already here
This is all way off topic.
11-23-2014, 07:05 AM
#816
thatcoolguy1111
Haxor!
11-24-2014, 02:48 PM
#818
rul3z
sexybeast
Originally posted by tonyjih
v2.60 dump memory slower and make some games freeze when loading (GTAV and some gundam games), tested on model 2507b with 4.65habib...
Its common knowledge that 2.60 ccapi preforms much worse then 2.50 for some reason. So if you want better results consider downgrading your CFW so you can use the 2.50 version
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
