Post: Another PS3 linux exploit! leading to the keys..
Options
03-09-2011, 12:08 AM
#1
EnVy_AsTrO
Hurah!
I will now post all my updates with a "update"
Update 1.) Attempt at downgrading.
What happens? It decides to throw an error saying "This data type is not supported" Maybe someone should create a firmware that spoof's 3.56. I don't think this would work though, but we could give it a try. I'll try that in a few hours.
Update 2.) 3.60 has some flaws..
Update 3.) Wan't to find the keys yourself? I might release a tutorial later.
We all know that 3.60 re-secures the console. BUT I'm working on something that might work, will report back later on updates.
Well, I was able to dump both the lv1 and lv2 hypervisor. Next step, attempting a cold-boot attack. If I'm successful, we will MOST likely have the keys real soon. Last time I attempted a cold boot on lv1, my RAM over heated.. So I had to dump it to my PC. But this time I might just use liquid oxygen if I can find some. In the lv1 dump, I found some information that will help us to prevent bans. We might soon be able to spoof our MAC address. IF the MAC is not physical.. If you guys want a full list of the self files in the dump, let me know and I'll add them in here. I might release the HV kernel module if you guys want that too.
We don't have all keys. We fail to have the private keys. And, we do NOT have full access to lv2. How would you figure that? If we did, we would of had the keys a LONG time ago. I'm not going to use liquid oxygen, as that is kind of unpractical. I'll just dump to my PC.
The following 32 users say thank you to EnVy_AsTrO for this useful post:
ᴬustin_Powers, Midnight.eGo, AlphaPoppy, ashman788, basser1, ChynkBud, david9602, DiJiTaLNiCk, dPaws, effinTyler, emersons35, Goblom, ILovePie24!!, imfamousalr, The Epic, J.V., JonnyH94, jsonnerrr, juliex877, killa skillz, MajorPSP156, NextGenTactics, Press ►, Sambrears, sithxnew, sj_7, Slay No More, StevzZy1, stuartlittle98, theycallmeryan, ThisIsBio, wardoc22
03-13-2011, 04:12 AM
#138
xShadow
Pr0n ftw
Originally posted by AsTrO
And? You got a corrupted data error. That is because YOU don't have the private key.
Mine got an data is not supported error because I was trying to downgrade to a lower firmware.
Mine got an data is not supported error because I was trying to downgrade to a lower firmware.
You have priv key, then you can make 3.56 cfw no error? Atleast give us some hints
03-13-2011, 04:23 AM
#140
xShadow
Pr0n ftw
Originally posted by AverageScrub
Cool story bro.
Read the spoiler if you want to see my real opinion. If not, just call me a "flamer" or a "troll" and move on.
****, you be trollin. You managed to get respected members of the community to FLAME you. 
This thread is epic lol. Your RAM overheated? Seriously? Did you put it in the toaster or something? Did your computer also overheat when you rendered that badass video you posted? [Epic background btw. Made me have a nerdgasm. I lurv me sum CoD gunz.] not.
First off, as many others have courteously pointed out, everything he has ever produced has been basically bullshit.
Secondly, you really do have to wonder if he ACTUALLY thought his MAC address was software. If you really could change it that easily, people would have done this on their computers a LONG time ago to get around other things.
Third, why would you post a video of yourself downloading the update in real time? 7 minutes? Do you actually KNOW how to use a basic NLE, like Movie Maker or something? You have a capture card but don't know how to speed up the video? LOL. Stop wasting my time. You probably just decided to do that to give a reason to post boost with all of your little "updates" because your video wasn't up yet.
Fourth, how would you have known 3.60 had flaws if you hadn't even downloaded it yet? It just came out last night. And how is "data type not supported", as you said, "good progress"? You didn't do ANYTHING! You just downloaded it and blocked the port you downloaded it from or something. I am too lazy to actually think of how you managed to get that error from the internet.
Fifth, you didn't post any selfs like you said you would. Do you even know how to ACCESS those? Considering you said your RAM overheated, and that you were going to use liquid oxygen to fix that, I have to wonder.
Face it! You have accomplished nothing but feed the leeches that don't know what the hell an error means, and that you don't know how to do anything but waste people's time. You should change your name and lay low for a while, because you're screwed with this community if you don't.
Read the spoiler if you want to see my real opinion. If not, just call me a "flamer" or a "troll" and move on.
This thread is epic lol. Your RAM overheated? Seriously? Did you put it in the toaster or something? Did your computer also overheat when you rendered that badass video you posted? [Epic background btw. Made me have a nerdgasm. I lurv me sum CoD gunz.] not.
First off, as many others have courteously pointed out, everything he has ever produced has been basically bullshit.
Secondly, you really do have to wonder if he ACTUALLY thought his MAC address was software. If you really could change it that easily, people would have done this on their computers a LONG time ago to get around other things.
Third, why would you post a video of yourself downloading the update in real time? 7 minutes? Do you actually KNOW how to use a basic NLE, like Movie Maker or something? You have a capture card but don't know how to speed up the video? LOL. Stop wasting my time. You probably just decided to do that to give a reason to post boost with all of your little "updates" because your video wasn't up yet.
Fourth, how would you have known 3.60 had flaws if you hadn't even downloaded it yet? It just came out last night. And how is "data type not supported", as you said, "good progress"? You didn't do ANYTHING! You just downloaded it and blocked the port you downloaded it from or something. I am too lazy to actually think of how you managed to get that error from the internet.
Fifth, you didn't post any selfs like you said you would. Do you even know how to ACCESS those? Considering you said your RAM overheated, and that you were going to use liquid oxygen to fix that, I have to wonder.
Face it! You have accomplished nothing but feed the leeches that don't know what the hell an error means, and that you don't know how to do anything but waste people's time. You should change your name and lay low for a while, because you're screwed with this community if you don't.
The third one would make the vid look fake, the forth one, he was trying to downgrade with an program I believe You must login or register to view this content.
03-13-2011, 04:27 AM
#142
xIEpidemic
Raging? [✔] Yes [ ] No
Originally posted by xShadow125
No, it wouldn't. Because any normal person would put something saying that it was sped up until the error. No need to overcomplicate things.
And also, one more thing, if this is a LINUX exploit, it would involve not only an older firmware than 3.55, but it would also involve an external device with Linux on it, or pulling up the OtherOS on the system. This is just bull-****ing-shit, believe it.
03-13-2011, 05:15 AM
#143
EnVy_AsTrO
Hurah!
Originally posted by AverageScrub
Cool story bro.
Read the spoiler if you want to see my real opinion. If not, just call me a "flamer" or a "troll" and move on.
****, you be trollin. You managed to get respected members of the community to FLAME you.
This thread is epic lol. Your RAM overheated? Seriously? Did you put it in the toaster or something? Did your computer also overheat when you rendered that badass video you posted? [Epic background btw. Made me have a nerdgasm. I lurv me sum CoD gunz.] not.
First off, as many others have courteously pointed out, everything he has ever produced has been basically bullshit.
Secondly, you really do have to wonder if he ACTUALLY thought his MAC address was software. If you really could change it that easily, people would have done this on their computers a LONG time ago to get around other things.
Third, why would you post a video of yourself downloading the update in real time? 7 minutes? Do you actually KNOW how to use a basic NLE, like Movie Maker or something? You have a capture card but don't know how to speed up the video? LOL. Stop wasting my time. You probably just decided to do that to give a reason to post boost with all of your little "updates" because your video wasn't up yet.
Fourth, how would you have known 3.60 had flaws if you hadn't even downloaded it yet? It just came out last night. And how is "data type not supported", as you said, "good progress"? You didn't do ANYTHING! You just downloaded it and blocked the port you downloaded it from or something. I am too lazy to actually think of how you managed to get that error from the internet.
Fifth, you didn't post any selfs like you said you would. Do you even know how to ACCESS those? Considering you said your RAM overheated, and that you were going to use liquid oxygen to fix that, I have to wonder.
Face it! You have accomplished nothing but feed the leeches that don't know what the hell an error means, and that you don't know how to do anything but waste people's time. You should change your name and lay low for a while, because you're screwed with this community if you don't.
Read the spoiler if you want to see my real opinion. If not, just call me a "flamer" or a "troll" and move on.
This thread is epic lol. Your RAM overheated? Seriously? Did you put it in the toaster or something? Did your computer also overheat when you rendered that badass video you posted? [Epic background btw. Made me have a nerdgasm. I lurv me sum CoD gunz.] not.
First off, as many others have courteously pointed out, everything he has ever produced has been basically bullshit.
Secondly, you really do have to wonder if he ACTUALLY thought his MAC address was software. If you really could change it that easily, people would have done this on their computers a LONG time ago to get around other things.
Third, why would you post a video of yourself downloading the update in real time? 7 minutes? Do you actually KNOW how to use a basic NLE, like Movie Maker or something? You have a capture card but don't know how to speed up the video? LOL. Stop wasting my time. You probably just decided to do that to give a reason to post boost with all of your little "updates" because your video wasn't up yet.
Fourth, how would you have known 3.60 had flaws if you hadn't even downloaded it yet? It just came out last night. And how is "data type not supported", as you said, "good progress"? You didn't do ANYTHING! You just downloaded it and blocked the port you downloaded it from or something. I am too lazy to actually think of how you managed to get that error from the internet.
Fifth, you didn't post any selfs like you said you would. Do you even know how to ACCESS those? Considering you said your RAM overheated, and that you were going to use liquid oxygen to fix that, I have to wonder.
Face it! You have accomplished nothing but feed the leeches that don't know what the hell an error means, and that you don't know how to do anything but waste people's time. You should change your name and lay low for a while, because you're screwed with this community if you don't.
Have you ever heard of a cold-boot attack? Have you ever heard of having multiple PS3's? You must not, as your Mom had to buy you yours.
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
