Post: Turbo Coding?
Options
03-22-2013, 01:58 PM
#1
DomtheBomb14
Do a barrel roll!
03-29-2013, 06:15 PM
#30
sid_chiclana
Keeper
03-29-2013, 08:13 PM
#32
sid_chiclana
Keeper
03-30-2013, 11:52 AM
#33
kevinlowl
Keeper
Originally posted by mschreck
Cheers K, will try tonight then hopefully get lucky 
Will update any results, thanks again.
Update: Worked!
To replace the values keep track of the length between the turbo values and HP multiplier (28 00 00 64) For the first set, length must be 14B, starting from the offset E980/70 locate the 28 that belongs to the HP multiplier and go upwards till you reach the 14B length (ex offset E830/20). Now replace the next 01 value for 09. Repeat the steps for the length A8 (ex offset E8D0/E0) now replacing 09 D1 for 78 90. Now for the last set, length is 27 (ex offset E960/50) replace 00 00 00 to 12 34 56.
This also worked to make a NA engine, just swap the values to do it. All credit goes to Kevin.
Will update any results, thanks again.
Update: Worked!
To replace the values keep track of the length between the turbo values and HP multiplier (28 00 00 64) For the first set, length must be 14B, starting from the offset E980/70 locate the 28 that belongs to the HP multiplier and go upwards till you reach the 14B length (ex offset E830/20). Now replace the next 01 value for 09. Repeat the steps for the length A8 (ex offset E8D0/E0) now replacing 09 D1 for 78 90. Now for the last set, length is 27 (ex offset E960/50) replace 00 00 00 to 12 34 56.
This also worked to make a NA engine, just swap the values to do it. All credit goes to Kevin.
Yup, but don't change them exactly to '78 90' and '12 34 56'. I just used those values as an example.
You need to change them to values obtained from the turbo car you want to get the turbo from.
Originally posted by chiclana
Yeah, I know how to do most things, apart from sticking a turbo on a non turbo car 
So,
1. Get into the car which contain the turbo you want. Remember to install whichever rpm turbo you want.
2. Copy the save file and open in HxD.
3. Find the HP Multiplier.
4. Highlight '28' and move your mouse up until the 'length' at the bottom of HxD is at '14B'.
5. The value right before the highlighted part is the one you want.
6. Write it down or copy it to notepad or something.
7. Do the same for length 'A8' and write down the four values right before the highlighted part.
8. Do the same for length '27' and write down the three values right before the highlighted part.
9. Get into the car which you want to install the turbo on.
10. Copy the save file and pen in HxD.
11. Find the HP Multiplier.
12. Highlight '28' and move your mouse up until the 'length' at the bottom of HxD is at '14B'.
13. Replace the value right before the highlighted part with the one you got from the turbo car.
14. Do the same with length 'A8' and '27'.
15. Easy as pie.
I hope you understand all that.
03-30-2013, 01:48 PM
#34
DJ Shinkai
Keeper
Did I do something wrong or is it just a bug in the game?
I tried putting a turbo on a Murcielago LP670-SV. When I checked the tuning store, it says that I have a high RPM turbo attached. But when I try to drive the car, I don't see a boost meter at all. Even in the car's tuning settings, I see no turbo, all I see is "Reset to Default" /:
I tried putting a turbo on a Murcielago LP670-SV. When I checked the tuning store, it says that I have a high RPM turbo attached. But when I try to drive the car, I don't see a boost meter at all. Even in the car's tuning settings, I see no turbo, all I see is "Reset to Default" /:
03-30-2013, 02:48 PM
#37
Brian Wong
Grunt
Originally posted by DJ
Did I do something wrong or is it just a bug in the game?
I tried putting a turbo on a Murcielago LP670-SV. When I checked the tuning store, it says that I have a high RPM turbo attached. But when I try to drive the car, I don't see a boost meter at all. Even in the car's tuning settings, I see no turbo, all I see is "Reset to Default" /:
I tried putting a turbo on a Murcielago LP670-SV. When I checked the tuning store, it says that I have a high RPM turbo attached. But when I try to drive the car, I don't see a boost meter at all. Even in the car's tuning settings, I see no turbo, all I see is "Reset to Default" /:
Available parts are tied to the body of the car. As long as there is more power it's fine.
Copyright © 2026, NextGenUpdate.
All Rights Reserved.
